default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDIAS 2007, New Orleans, LA, USA
- Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, New Orleans, LA, USA, September 23-27, 2007. IEEE 2007, ISBN 978-1-4244-1259-4
- Thomas J. Dionise, Visuth Lorch, Brandon J. Brazil:
Power Quality Investigation of Back-to-Back Harmonic Filters for a High-Voltage Anode Foil Manufacturing Facility. 1-8 - Chao Shun Chen, Y. D. Lee, Cheng Ting Hsu, D. S. Ting, C. C. Shen:
Power Quality Assessment of a Hot Strip Mill with Cycloconverter Drive Systems. 9-16 - Rosario Casanueva
, Francisco J. Azcondo, Lidia Alcedo, Jorge Jiménez:
Advanced Cutting Experiences for a Nuclear Power Plant Application. 17-21 - Cheng-Tsung Liu, Yen-Ming Chen, Jen-Hsin Chen, Muh-Jung Lu:
Three-Dimensional Design and Performance Assessments of a Linear Induction-Type Electromagnetic Stirrer. 22-27 - Malay K. Mazumder, J. Robison, C. Wyatt, P. K. Srirama, Rajesh Sharma, Jing Zhang, Alexandru S. Biris:
Electrohydrodynamic Dispersion of Dry Fine Powders. 28-31 - K. Adamiak, A. Mizuno, M. Nakano:
Electrohydrodynamic Flow in Optoelectrostatic Micropump: Experiment Versus Numerical Simulation. 32-37 - Ichiro Kano, Yosuke Shii, Tatsuo Nishina:
Development of an Electrohydrodynamic Micropump. 38-44 - Miad Yazdani, Jamal Seyed-Yagoobi:
Fluid Circulation within a Spherical Reservoir with EHD Conduction Pumping. 45-50 - Viney Saini, Alexandru S. Biris, Enkeleda Dervishi, Zhongrui Li, Steven S. Trigwell, Alexandru R. Biris, Dan Lupu, Zia Rahman, Reginald Little, Divey Saini:
Carbon Nanotubes Grown by RF Heating and their Morphological and Structural Properties. 51-54 - Drew B. Jensen, Zhongrui Li, Ioana Pavel, Enkeleda Dervishi, Alexandru S. Biris, Alexandru R. Biris, Dan Lupu, Peder J. Jensen:
Bone Tissue: A Relationship Between Micro and Nano Structural Composition and its Corresponding Electrostatic Properties with Applications in Tissue Engineering. 55-59 - Mircea Popescu, T. J. E. Miller, Malcolm Iain McGilp, Dan M. Ionel, Stephen J. Dellinger, Robert J. Heideman:
On the Physical Basis of Power Losses in Laminated Steel and Minimum-Effort Modeling in an Industrial Design Environment. 60-66 - Yunkai Huang, Qiansheng Hu, Jianfeng Zhao, Jianguo Zhu, Youguang Guo:
Comparative Study of High-Speed PM Motors with Laminated Steel and Soft Magnetic Composite Cores. 67-72 - Aldo Boglietti, Andrea Cavagnino, David A. Staton:
Determination of Critical Parameters in Electrical Machine Thermal Models. 73-80 - Aldo Boglietti, Andrea Cavagnino:
Iron Loss Prediction with PWM Supply: An Overview of Proposed Methods from an Engineering Application Point of View. 81-88 - Luca Del Ferraro, Fabio Giulii Capponi:
Aluminium Multi-Wire for High-Frequency Electric Machines. 89-93 - Waqas M. Arshad, Thomas Ryckebusch, Freddy Magnussen, Heinz Lendenmann, Juliette Soulard, Bengt Eriksson, Bo Malmros:
Incorporating Lamination Processing and Component Manufacturing in Electrical Machine Design Tools. 94-102 - Seok-Hee Han, Wen L. Soong, Thomas M. Jahns:
An Analytical Design Approach for Reducing Stator Iron Losses in Interior PM Synchronous Machines During Flux-Weakening Operation. 103-110 - Wen L. Soong, S. H. Han, Thomas M. Jahns, Nesimi Ertugrul:
Reducing Iron Loss in Interior PM Machines under Field-Weakening Conditions. 111-118 - Gyu-Hong Kang, Young-Dae Son, Gyu-Tak Kim:
A Novel Cogging Torque Reduction Method for Interior Type Permanent Magnet Motor. 119-125 - Yoshiaki Kano, K. Watanabe, Takashi Kosaka, Nobuyuki Matsui:
A Novel Approach for Circuit-Field-Coupled Time Stepping Electromagnetic Analysis of Saturated Interior PM Motors. 126-132 - Eric Armando, Paolo Guglielmi, Gianmario Pellegrino, Michele Pastorelli, Alfredo Vagati:
Accurate Magnetic Modelling and Performance Analysis of IPM-PMASR Motors. 133-140 - Johannes Germishuizen, Maarten Kamper:
Design and Performance Characteristics of IPM Machines with Single Layer Non-Overlapping Concentrated Windings. 141-147 - Mircea Popescu, T. J. E. Miller, Malcolm Iain McGilp, Dan M. Ionel, Stephen J. Dellinger:
A Unified Approach to the Synchronous Performance Analysis of Single and Poly-Phase Line-Fed Interior Permanent Magnet Motors. 148-153 - Chong Ng, Li Ran, Jim Bumby:
Unbalanced Grid Fault Ride-Through Control for a Wind Turbine Inverter. 154-164 - Zhiling Qiu, Guozhu Chen:
Study and Design of Grid Connected Inverter for 2 MW Wind Turbine. 165-170 - Marius Fatu, Cristian Lascu, Gheorghe-Daniel Andreescu, Remus Teodorescu, Frede Blaabjerg, Ion Boldea:
Voltage Sags Ride-Through of Motion Sensorless Controlled PMSG for Wind Turbines. 171-178 - Wei Li, Géza Joós, Chad Abbey:
A Parallel Bidirectional DC/DC Converter Topology for Energy Storage Systems in Wind Applications. 179-185 - Christian Klumpner, Meng Lee, Cristian Pitic, Pat Wheeler, Pericle Zanchetta:
A New Three-Level Indirect Matrix Converter with Reduced Number of Switches. 186-193 - Poh Chiang Loh, Frede Blaabjerg, Feng Gao, Anto Baby, Desmond Aik Chuan Tan:
Pulse-Width-Modulation of Neutral-Point-Clamped Sparse Matrix Converter. 194-201 - Marco E. Rivera, René E. Vargas, José R. Espinoza, José R. Rodríguez:
Behavior of the Predictive DTC Based Matrix Converter Under Unbalanced AC Supply. 202-207 - Bingsen Wang, Giri Venkataramanan:
Dynamic Voltage Restorer Utilizing a Matrix Converter and Flywheel Energy Storage. 208-215 - Christoph Meyer, Rik W. De Doncker:
Design of a Three-Phase Series Resonant Converter for Offshore DC Grids. 216-223 - Sayed Ali Khajehoddin, Alireza R. Bakhshai, Praveen K. Jain:
A Sparse Multilevel Matrix Converter Based on Diode-Clamped Topology. 224-228 - Annette Muetze, H. William Oh:
Design Aspects of Conductive Microfiber Rings for Shaft Grounding Purposes. 229-236 - Myungchul Kim, Kwangwoon Lee, Jangho Yoon, Sang Bin Lee, Jiyoon Yoo:
Condition Monitoring of DC Link Electrolytic Capacitors in Adjustable Speed Drives. 237-243 - Ciro Attaianese, Vito Nardi, Giuseppe Tomasso:
A Novel Control for Dual Cascaded Inverters. 244-250 - Mu-Shin Kwak, Seung-Ki Sul:
Flux Weakening Control of an Open Winding Machine with Isolated Dual Inverters. 251-255 - Young-Doo Yoon, Eunsoo Jung, Anno Yoo, Seung-Ki Sul:
Dual Observers for the Disturbance Rejection of a Motion Control System. 256-261 - Miroslav Chomat, Ludek Schreier, Jiri Bendl:
Operation of Adjustable-Speed Drives under Non-Standard Supply Conditions. 262-267 - Yen-Shin Lai, Ko-Yen Lee, Jing-Hong Tseng, Yen-Chang Chen, Tse-Liang Hsiao:
Efficiency Comparison of PWM-Controlled and PAM-Controlled Sensorless BLDCM Drives for Refrigerator Applications. 268-273 - Zhengyu Lin, Jiabin Wang, David Howe:
A Hybrid Current Controller for Linear Reciprocating Vapor Compressors. 274-280 - Gianmario Pellegrino, Radu Bojoi, Paolo Guglielmi:
Performance Comparison of Sensorless Field Oriented Control Techniques for Low Cost Three-Phase Induction Motor Drives. 281-288 - Ludovic Chretien, Iqbal Husain:
Position Sensorless Control of Non-Salient PMSM from Very Low Speed to High Speed for Low Cost Applications. 289-296 - Salih Baris Ozturk, Oh Yang, Hamid A. Toliyat:
Power Factor Correction of Direct Torque Controlled Brushless DC Motor Drive. 297-304 - Hyunjae Yoo, Seung-Ki Sul, Hoyong Jang, Youngho Hong:
Design of a Variable Speed Compressor Drive System for Air-Conditioner without Electrolytic Capacitor. 305-310 - Jiabin Wang, David Howe, Zhengyu Lin:
Comparative Study of Winding Configurations of Short-Stroke, Single Phase Tubular Permanent Magnet Motor for Refrigeration Applications. 311-318 - Renyan William Fei:
A 4/6-Pole PSC Motor with Shared Windings. 319-323 - Michael Treu, Roland Rupp, P. Blaschitz, K. Rüschenschmidt, Thomas Sekinger, Peter Friedrichs, Rudolf Elpelt, D. Peters:
Strategic Considerations for Unipolar SiC Switch Options: JFET vs. MOSFET. 324-330 - Tiefu Zhao, Jun Wang, Alex Q. Huang, Anant Agarwal:
Comparisons of SiC MOSFET and Si IGBT Based Motor Drive Systems. 331-335 - Joseph Carr, Daniel Hotz, Juan Carlos Balda, H. Alan Mantooth, Alvin Ong:
Assessing the Impact of SiC MOSFETs on Converter Interfaces for Distributed Energy Resources. 336-341 - L. Lu, Z. Chen, Angus T. Bryant, Enrico Santi, Jerry L. Hudgins, Patrick R. Palmer:
Modeling of MOS-Side Carrier Injection in Trench-Gate IGBTs. 342-349 - Filippo Chimento, Salvatore Musumeci, Angelo Raciti, S. Sannino, A. Magrì, Maurizio Melito, F. Zara:
Robustness Evaluation of MOSFETs by Equivalent Cell Behavioral Model of the Gate Parasitic Resistance. 350-357 - Peter Köllensperger, Michael Bragard, Thomas Plum, Rik W. De Doncker:
The Dual GCT - A New High-Power Device Using Optimized GCT Technology. 358-365 - Filippo Chimento, Vittorio Crisafulli, Salvatore Musumeci, Angelo Raciti, Simone Buonomo, Rosario Scollo:
Experimental Investigation of Monolithic Cascode Devices in Inverter Leg Applications. 366-373 - John Pittner, Marwan A. Simaan, Nicholas S. Samaras:
A Novel Approach for Optimal Control of Continuous Tandem Cold Metal Rolling. 374-381 - John Pittner, Marwan A. Simaan:
An Optimal Control Method for Improvement in Tandem Cold Metal Rolling. 382-389 - Rubén Usamentiaga, Julio Molleda, Daniel F. García:
Real-Time Assessment of the Reliability of Welds in Steel Strips. 390-397 - Chang-Woo Lee, Kee-Hyun Shin:
A Study on Taper Tension Control Considering Telescoping in the Winding System. 398-403 - Özgül Salor, Burhan Gültekin, Serkan Buhan, Burak Boyrazoglu, Tolga Inan, Tevhid Atalik, A. Açik, A. Terciyanli, Özgür Ünsar, Erinc Altintas, Y. Akkaya, E. Özdemirci, Isik Çadirci, Muammer Ermis:
Electrical Power Quality of Iron and Steel Industry in Turkey. 404-423 - P. K. Srirama, J. W. Stark, Jing Zhang, Malay K. Mazumder:
Non-contact Measurements of Size and Charge Distributions of Submicron Particles using an ESPART Analyzer. 424-426 - Jing Zhang, P. K. Srirama, Rajesh Sharma, Malay K. Mazumder:
In-Situ Measurements of Particle Size and Charge Distributions for Mars and Lunar Missions. 427-433 - Rajesh Sharma, C. Wyatt, Jing Zhang, Malay K. Mazumder, C. I. Calle, N. Mardesich:
Performance Analysis of Electrodynamic Self-Cleaning Transparent Films for its Applications to Mars and Lunar Missions. 434-437 - Toshiyuki Sugimoto, Noriyuki Shirahata, Yoshio Higashiyama, Koichi Takeda:
Surface Potential of Insulating Plate Coated by Metallic Paint Spray. 438-443 - Olivier Fruchier, Petru Notingher Jr., Serge Agnel, Alain Toureille, F. Forest, S. Cunningham, Bernard Rousset, Jean-Louis Sanchez:
Applications of the Thermal Step Method to the Characterization of Electric Charge in MOS Components. 444-451 - Pierre Atten, Frédéric Aitken:
Electrocoalescence Criterion for Two Close Water Drops. 452-456 - Murilo Cervi, Tiago Bandeira Marchesan, Alexandre Campos, Ricardo Nederson do Prado:
A Comparative Analysis of HID Lamp Electronic Ballasts Based on Differential Connection of Two DC/DC Converters. 457-462 - Tiago B. Marchesan, Marco A. Dalla Costa, Marina S. Perdigão, J. Marcos Alonso, Ricardo N. do Prado:
Two Flyback-Based Integrated Converters for the Implementation of LFSW Electronic Ballasts. 463-470 - Lakshmi R. Gopi Reddy, Leon M. Tolbert, Hui Zhang, Tom F. Cheek Jr.:
Performance of "Ultra-High" Efficient Electronic Ballast for HID Lamps Using SiC Devices. 471-477 - Sounil Bhosle, Jean-Baptiste Rouffet, David Buso, Michel Aubès, Georges Zissis:
Modeling of Acoustic Resonances in HID Lamps - Coupling Between Standing Waves and Arc Bending. 478 - Juan Carlos Álvarez Antón, C. Blanco, F. Ferrero, A. Martín, N. Bordel, Georges Zissis, Sounil Bhosle:
Acoustic Resonance Effects in High Pressure Sodium Lamps. 479-483 - Marco A. Dalla Costa, J. Marcos Alonso, Tiago B. Marchesan, Murilo Cervi, Ricardo N. do Prado:
Generalized Analysis and Comparison of High-Power-Factor Integrated Topologies to Supply Metal Halide Lamps with Low Frequency Square Waveform. 484-489 - Masayuki Sanada, Shigeo Morimoto:
Experimental Verification of Thrust Improvement in Voice Coil Linear Actuator Using Combined Wire of Copper and Iron. 490-494 - Frédéric Giraud, Betty Lemaire-Semail, Julien Aragones, Jacques Robineau, Jean-Thierry Audren:
Stability Analysis of an Ultrasonic Motor for a New Wave Amplitude Control. 495-501 - Jeroen L. G. Janssen, Johannes J. H. Paulides, Elena A. Lomonova, André J. A. Vandenput:
Analysis of a Variable Reluctance Permanent Magnet Actuator. 502-509 - S. Filiz, Robert J. Veillette, Iqbal Husain, N. Ida, H. Klode, Thomas A. Baudendistel:
Analysis of a Flexible Cylindrical Structure for a Harmonic Motor Drive. 510-517 - S. Demmig, R. Gehrking, Karsten Wiedmann, Axel Mertens, Bernd Ponick:
Design and Control of a Micro Linear Motor with Integrated Magnetic Guidance. 518-522 - Haodong Li, Pragasen Pillay:
A Linear Generator Powered from Bridge Vibrations for Wireless Sensors. 523-529 - Fabrizio Marignetti, Piergiacomo Cancelliere, Vincenzo Delli Colli, Roberto Di Stefano, Maurizio Scarano:
Analytical Formulation of Radial Magnetic Forces in PM Linear Tubular Machines with Translator Eccentricity. 530-536 - Y. Chen, Z. Q. Zhu, D. Howe, J. H. Gliemann:
Rotor Eddy Current Loss in Single-Phase Permanent Magnet Brushless DC Motor. 537-543 - Manoj R. Shah, Ayman M. El-Refaie:
Eddy Current Loss Minimization in Conducting Sleeves of High Speed Machine Rotors by Optimal Axial Segmentation and Copper Cladding. 544-551 - Miya Amada, Akira Mizuguchi, Yoshihiro Asano, Junichi Asama, Akira Chiba, Masatsugu Takemoto, Tadashi Fukao:
Winding Design and Characteristic of a Consequent-Pole Type Bearingless Motor with 4-Axis Active Magnetic Suspension. 552-557 - Seok-Hee Han, Thomas M. Jahns, Wen L. Soong:
Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using the Principle of Mutual Harmonics Exclusion. 558-565 - Jie Chai, Jiabin Wang, Kais Atallah, David Howe:
Performance Comparison and Winding Fault Detection of Duplex 2-Phase and 3-Phase Fault-Tolerant Permanent Magnet Brushless Machines. 566-572 - L. N. Jian, K. T. Chau, Dong Zhang, J. Z. Jiang, Zheng Wang:
A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation. 573-580 - Yakov L. Familiant, Donald Grahame Holmes, Thomas A. Lipo, Brendan P. McGrath:
A General Modulation Strategy for a Five-Level Three-Phase Current Source Inverter with Regulated Intermediate DC Link Currents. 581-588 - Gopal Mondal, K. Gopakumar, P. N. Tekwani, Emil Levi:
A Multi-Level Inverter Structure with Cascaded Two-Level and Three-Level Inverters for IM Drive with CMV Elimination and DC-Link Capacitor Voltage Balancing. 589-596 - Iván A. Rubilar, José R. Espinoza, Javier A. Muñoz, Luis A. Morán:
DC Link Voltage Unbalance Control in Three-Phase UPQCs based on NPC Topologies. 597-602 - Zhong Du, Burak Ozpineci, Leon M. Tolbert, John N. Chiasson:
Inductorless DC-AC Cascaded H-Bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle Applications. 603-608 - Liviu Mihalache:
Asymmetrical PWM Technique for a Three-Level Hybrid Inverter. 609-615 - Lixin Tang, Gui-Jia Su:
An Interleaved, Reduced Component Count, Multi-Voltage Bus DC/DC Converter For Fuel Cell Powered Electric Vehicle Applications. 616-621 - Wensong Yu, Jih-Sheng Lai, Hao Qian:
A Family of Novel Zero-Voltage and Zero-Current Switching Full Bridge Converters Using Output Voltage Reset for Fuel Cell Application. 622-627 - Faisal H. Khan, Leon M. Tolbert:
5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive Applications. 628-635 - Hui Li, Danwei Liu:
Power Distribution Strategy of Fuel Cell Vehicle System with Hybrid Energy Storage Elements Using Triple Half Bridge (THB) Bidirectional DC-DC converter. 636-642 - Haihua Zhou, Ashwin M. Khambadkone, Xin Kong:
A Passivity Based Control with Augmented Integration for an Interleaved Current Fed Full Bridge Converter as a Front End for Fuel Cell Source. 643-649 - Bhaskara Palle, Marcelo Godoy Simões:
Dynamic Integration of a Grid Connected DFIG Wind Turbine with a Fuel Cell. 650-655 - Jung-Sik Yim, Seung-Ki Sul, Ji-Seop Byeon, Sung-Il Lim:
Voltage Sag Ride-Through of Super High-Speed Turbo Compressor. 656-660 - Yahan Hua, Gregory M. Asher, Mark Sumner, Qiang Gao:
Sensorless Control of Surface Mounted Permanent Magnetic Machine Using the Standard Space Vector PWM. 661-667 - Nicola Bianchi, Silverio Bolognani:
Sensorless-Oriented-Design of PM Motors. 668-675 - Shigeo Morimoto, Yukinori Inoue, Ting-Fei Weng, Masayuki Sanada:
Position Sensorless PMSM Drive System Including Square-Wave Operation at High-Speed. 676-682 - Ying Yan, Jianguo Zhu, Youguang Guo:
A Direct Torque Controlled Surface Mounted PMSM Drive with Initial Rotor Position Estimation Based on Structural and Saturation Saliencies. 683-689 - Nathan T. West, Robert D. Lorenz:
Implementation and Evaluation of a Stator and Rotor Flux Linkage-Based Dead-Beat, Direct Torque Control of Induction Machines at the Operational Voltage Limits. 690-695 - Hsi Chang, Yen-Shin Lai:
Novel AC Driver and Protection Circuits with Dimming Control for Light Emitting Diodes. 696-700 - Huangsheng Xu, Kevin King, Yashvant Jani:
High Performance DC Chopper Speed and Current Control of Universal Motors Using a Microcontroller. 701-705 - Francesco Pitzalis, Nicola Corino, Marco Ottella, Pietro Perlo, Paolo Guglielmi:
Study of High Efficiency Small Diameter Annular Wind Turbines by Means of CAE Techniques. 706-713 - Matthieu Urbain, Stéphane Raël, Bernard Davat:
Energetical Modeling of Lithium-Ion Batteries. 714-721 - Hamid Gualous, Hasna Louahlia-Gualous, Roland Gallay, Abdellatif Miraoui:
Supercapacitor Thermal Characterization in Transient State. 722-729 - Afroz M. Imam, Deepak M. Divan, Ronald G. Harley, Thomas G. Habetler:
Electrolytic Capacitor Failure Mechanism Due to Inrush Current. 730-736 - Alper Akdag, Thomas Stiasny, Thomas Setz, Tobias Wikstroem, Bjoern Backlund:
A Robust Reverse Blocking Switching Device for High Power Direct AC/AC and Current Source Converters. 737-741 - John F. Donlon, Eric R. Motto, Shinichi Iura:
Design and Development of New Robust 3.3kV IGBT and FWD Module Chips. 742-748 - Jennifer G. Vining, Annette Muetze:
Governmental Regulation of Ocean Wave Energy Converter Installations. 749-755 - Jennifer G. Vining, Annette Muetze:
Economic Factors and Incentives for Ocean Wave Energy Conversion. 756-763 - Chin-Kuei Lin, Jong-Bi Wei, Yuan-Piao Lee, Cheng-Kai Yeh:
Applied Grey System Theory to Power Quality of Utility Center in Campus. 764-770 - Yuan-Piao Lee, Chin-Kuei Lin, Kun-Li Wen, Shih-Kuen Changchien, Mei-Chi Lee, Lung Chen:
The Operation of 200W Ultra-High Performance Lamp. 771-775 - Kun-Li Wen, Hsiau-Hsian Nien, Yuan-Piao Lee, Chien-Wen Wang:
Apply Rough Set to the Study of Major Influence Factor in Gas Breakdown. 776-780 - Kelly Robinson:
Electrostatic Issues in Roll-to-Roll Manufacturing Operations. 781-786 - Khouira Senouci, Abdelber Bendaoud, Amar Tilmatine, Karim Medles, Subhankar Das, Lucian Dascalescu:
Multivariate Statistical Process Control of Electrostatic Separation Processes. 787-791 - Subhankar Das, Rainer Köhnlechner, Florian Aman, Lucian Dascalescu:
Corona Separation of Fly Ash. 792-799 - Alexandru Iuga, Adrian Samuila, Vasile Neamtu, Roman Morar, Radu Beleca, Subhankar Das, Lucian Dascalescu:
Electrostatic Separation Methods for Metal Removal from ABS Wastes. 800-807 - Norbert Grass:
150kV/ 300kW High Voltage Supply with IGBT Inverter for Large Industrial Electrostatic Precipitators. 808-811 - Ray-Lee Lin, Hsu-Ming Shih:
A Family of Piezoelectric Transformer-Based Bridgeless Continuous-Conduction-Mode Charge-Pump Power-Factor-Correction Electronic Ballasts. 812-818 - John C. W. Lam, Praveen K. Jain:
Single Switch Electronic Ballast with Unity Power Factor for Compact Fluorescent Lightings Based on a Single-Stage Current Fed Resonant Inverter. 819-825 - F. Javier Díaz, Francisco J. Azcondo, Christian Brañas, Rosario Casanueva, Regan Zane:
Digitally Controlled Low Frequency Square Wave Electronic Ballast with Resonant Ignition and Power Loop. 826-832 - Francisco J. Azcondo, Alfredo Ortiz, Mario Mañana, F. Javier Díaz, Christian Brañas, Carlos Renedo, Severiano Pérez, Fernando Delgado, Rosario Casanueva:
Effects of Flicker on Different Types of 150-W High-Pressure Sodium Lamps and Ballasts. 833-838 - Christian Brañas, Francisco J. Azcondo, Rosario Casanueva, Francisco J. Díaz:
Penta-Phase Series-Parallel LCsCp Resonant Inverter to Drive 1kW HPS Lamps. 839-845 - Ranjan Kumar Gupta, Ned Mohan:
A Three-Phase Permanent Magnet Brushless DC Motor for Low-Power Low-Speed Fan Applications - Optimizing Cost and Efficiency. 846-852 - Vincent Pauvert, N. Bernard, M. E. Zaïm, J. Bonnefous:
Modelisation and Optimization of Clutch Magnet Actuator Topologies. 853-860 - Jorma Luomi, Christof Zwyssig, Andreas Looser, Johann W. Kolar:
Efficiency Optimization of a 100-W, 500 000-rpm Permanent-Magnet Machine Including Air Friction Losses. 861-868 - Sebastiano Merzaghi, Igor Stefanini, Miroslav Markovic, Yves Perriard:
Optimization of a Biomedical Actuator for Implantable Continuous Glucose Monitoring. 869-874 - Yoshiaki Kano, K. Tonogi, Takashi Kosaka, Nobuyuki Matsui:
Torque-Maximizing Design of Double-Stator, Axial-Flux, PM Machines Using Simple Non-Linear Magnetic Analysis. 875-881 - Wen L. Soong, P. B. Reddy, Ayman M. El-Refaie, Thomas M. Jahns, Nesimi Ertugrul:
Surface PM Machine Parameter Selection for Wide Field-Weakening Applications. 882-889 - Rasheek Rifaat, Bruce Baily, Gerald Dalke, Brent Duncan, Charles J. Mozina, Louie J. Powell, Jay Fischer, Alex Y. Wu, Joe Weber, James Daley:
Bus and Breaker Fail Protection for Industrial and Commercial Power Systems Part I: Introduction and Bus Protection Summary- Working Group Report. 890-897 - Rasheek Rifaat, Bruce Baily, Gerald Dalke, Brent Duncan, Charles J. Mozina, Louie J. Powell, Jay Fischer, Alex Y. Wu, Joe Weber, James Daley:
Bus and Breaker Fail Protection for Industrial and Commercial Power Systems Part II: Breaker Fail Protection and Conclusion Working Group Report. 898-903 - Bhavesh Bhalja, R. P. Maheshwari:
High Speed Protection Scheme for Traction OHE of 25 kV AC Indian Railway System. 904-910 - Gary H. Fox, Johnny Whitehead:
Ballast Survival When Exposed To Commonly Found Transient Voltages. 911-916 - Paul G. Cardinal:
Safe Installation of Metal Light Poles per NEC or NESC. 917-922 - Robert M. Cuzner, Ashish R. Bendre, Peter J. Faill, Boris Semenov:
Implementation of a Four Pole Neutral-Point Clamped Three Phase Inverter with Low Common Mode Voltage Output. 923-930 - Jung-Woo Park, Ki-Wook Lee, Dong-Wook Kim, Kwang-Soo Lee, Jin-Soon Park:
Control Method of a Doubly-Fed Induction Generator with a Grid Synchronization against Parameter Variation and Encoder Position. 931-935 - Alper Çetin, Muammer Ermis:
VSC Based D-STATCOM with Selective Harmonic Elimination. 936-948 - Adrian V. Timbus, Remus Teodorescu, Pedro Rodriguez:
Grid Impedance Identification Based on Active Power Variations and Grid Voltage Control. 949-954 - Chandana Jayampathi Gajanayake, D. Mahinda Vilathgamuwa, Poh Chiang Loh, Frede Blaabjerg, Remus Teodorescu:
Z-Source Inverter Based Power Quality Compensator with Enhanced Ride-Through Capability. 955-962 - Sheng-Ming Yang, Chun-Cheng Lin:
Performance of a Single-Axis Controlled Magnetic Bearing for Axial Blood Pump. 963-968 - Benjamin Blunier, Marcello Pucci, Giansalvo Cirrincione, Abdellatif Miraoui:
A Scroll Compressor with a High Performance Induction Motor Drive for the Air Management of a PEMFC System for Automotive Applications. 969-976 - Rae-Young Kim, Jih-Sheng Lai:
A Seamless Mode Transfer Maximum Power Point Tracking Controller for Thermoelectric Generator Applications. 977-984 - Carlos Ortiz, Adam Skorek, Michel Lavoie, Pierre Bénard:
Parallel CFD Analysis of Conjugate Heat Transfer in a Dry Type Transformer. 985-988 - Oliver Zirn, Jacek Nowak, Bernhard Hiller:
Dynamic Coupling Force Compensation for Direct-Driven Machine Tools. 989-992 - Joachim Holtz, Nikolaos Oikonomou:
Estimation of the Fundamental Current in Low Switching Frequency High-Dynamic Medium Voltage Drives. 993-1000 - Nathan T. West, Robert D. Lorenz:
Digital Implementation of Both a Stator and Rotor Flux Linkage Observer and Stator Current Observer. 1001-1007 - Mavungu (John) Masiala, Behzad Vafakhah, John Salmon, A. Knight:
Fuzzy Self-Tuning Speed Control of an Indirect Field-Oriented Control Induction Motor Drive. 1008-1014 - Zhenhuan Yuan, Haihui Lu, Russel J. Kerkman, Thomas A. Nondahl, Richard A. Lukaszewski:
Parameter Sensitivity Analysis of Flux Observers for Induction Motors. 1015-1022 - Ricardo L. A. Ribeiro, M. B. Santos, Aldayr D. Araújo, Alexandre Cunha Oliveira, Cursino Brandão Jacobina:
Two Different Approaches for Robust Adaptive Stator Current Control Strategies for Induction Motor Drives. 1023-1030 - Andrew Trentin, Pericle Zanchetta, Patrick W. Wheeler, Jon C. Clare, Robert Wood, Wes Typton:
Performance Assessment of SVM Modulation Techniques for Losses Reduction in Induction Motor Drives. 1031-1037 - S. Voss, O. Hellmund, W. Frank:
New IGBT Concepts for Consumer Power Applications. 1038-1043 - Steve Redpath, John Pocs:
Safety Regulations and Their Impact on Microcontrollers in Home Appliances. 1044-1046 - Eric R. Motto, John F. Donlon, K. Watabe, H. Kazunari, T. Araki:
A Monolithic 500V, 1A Three Phase Motor Driver with Small Outline Surface Mount Package. 1047-1051 - Andrea Bianchi, Massimo Valiani:
DSP-Based versus Microcontroller-Based Variable Frequency Drives for Domestic Washing Machines. 1052-1055 - Yashvant Jani:
Combining Vector Control and User Interface/Machine Functions into a Single Microcontroller for White Goods Applications. 1056-1063 - Jeff Stafford, Arefeen Mohammed:
Integration of Hardware and Software for an Optimized Appliance Drive. 1064-1069 - Giuseppe Parise:
Structural Design Criteria for Energy Saving in Electrical Installations. 1070-1075 - Wu-Shun Jwo, Wei-Liang Chien:
Design and Implementation of a Charge Equalization Using Positive/Negative Pulse Charger. 1076-1081 - Shun-Hsien Huang, Carlos Gonzalez-Perez, John Dumas, Wei-Jen Lee:
Grid Security through Load Reduction in the ERCOT Market. 1082-1086 - Chad Abbey, Geza Joos:
Coordination of Distributed Storage with Wind Energy in a Rural Distribution System. 1087-1092 - Mark N. Horenstein:
Review of Progress in Understanding Propagating Brush Discharges. 1093-1097 - Kazutoshi Asano, Yoshinari Fukada, Takashi Yasukawa:
Measurement of AC Ion Current from Ionizer by Using Faraday Cage. 1098-1104 - Zden Kucerovsky:
Relations between the Medium Composition, Dielectric Properties, and Corona Current. 1105-1110 - Octavian Blejan, Petru V. Notingher, Laurentiu Marius Dumitran, Mohamed Younes, Adrian Samuila, Lucian Dascalescu:
Experimental Study of the Corona Discharge in a Modified Coaxial Wire-Cylinder Electrostatic Precipitator. 1111-1114 - Isamu Amano, Masakazu Tanino, Naoto Fujii, Yasuaki Tanino, Kazunori Takashima, Akira Mizuno:
Sterilization Using a Wide-Gap Discharge Formed by Dielectric Barrier Discharge Coupled with Surface Discharge under Atmospheric Pressure. 1115-1118 - Daniel Porter, Micah D. Poplin, Frank Holzer, Wright C. Finney, Bruce R. Locke:
Formation of Hydrogen Peroxide, Hydrogen, and Oxygen in Gliding Arc Electrical Discharge Reactors with Water Spray. 1119-1123 - Kai-Yuan Shih, Radu Burlica, Wright C. Finney, Bruce R. Locke:
Effect of Pressure on Chemical Reaction in a Liquid Phase Electrical Discharge Reactor. 1124-1128 - Antonio J. Calleja, Angel Torres, Jorge García, Manuel Rico-Secades, Javier Ribas, Juan Ángel Martínez:
Evaluation of Power LEDs Drivers with Supercapacitors and Digital Control. 1129-1134 - M. Schmid, Daniel Kübrich, M. Weiland, Thomas Duerbaum:
Evaluation on the Efficiency of Power LEDs Driven with Currents Typical to Switch Mode Power Supplies. 1135-1140 - Alessandro A. M. Oliveira, Tiago B. Marchesan, Ricardo N. do Prado, Alexandre Campos:
Distributed Emergency Lighting System LEDs Driven by Two Integrated Flyback Converters. 1141-1146 - Joep Jacobs, Dirk Hente, Eberhard Waffenschmidt:
Drivers for OLEDs. 1147-1152 - Yoshifumi Shimodaira, Hitoshi Suzuki, Maciej Kretkowski:
New Imaging and Display System for Wide Gamut Color Reproduction. 1153-1157 - Tetsuya Muraoka, Hiroaki Ikeda:
Experimental Study on Distances of Objects Seen on Flat Panel Display Evaluated in Terms of Human Factors. 1158-1163 - Mircea Popescu, Claus B. Rasmussen, T. J. E. Miller, Malcolm Iain McGilp:
Effect of MMF Harmonics on Single-Phase Induction Motor Performance - A Unified Approach. 1164-1170 - David G. Dorrell, Finn Jensen:
Modeling Split Phase Induction Motors with Center-Tapped Windings and Asynchronous Torque Dips. 1171-1178 - Thomas M. Wolbank, Markus A. Vogelsberger, R. Stumberger, Salman Mohagheghi, Thomas G. Habetler, Ronald G. Harley:
Autonomous Self Commissioning Method for Speed Sensorless Controlled Induction Machines. 1179-1185 - Bin Lu, Wenping Cao, Ian French, Keith J. Bradley, Thomas G. Habetler:
Non-Intrusive Efficiency Determination of In-Service Induction Motors using Genetic Algorithm and Air-Gap Torque Methods. 1186-1192 - Aldo Boglietti, Andrea Cavagnino, A. M. Knight, Y. Zhan:
Factors Affecting Losses in Induction Motors with Non-Sinusoidal Supply. 1193-1199 - Marko Hinkkanen, Anna-Kaisa Repo, Mikaela Cederholm, Jorma Luomi:
Small-Signal Modelling of Saturated Induction Machines With Closed or Skewed Rotor Slots. 1200-1206 - Behrooz Mirafzal, Gary L. Skibinski, Rangarajan M. Tallam:
Determination of Parameters in the Universal Induction Motor Model. 1207-1216 - Mohit Singh, Surya Santoso, Christopher J. Melhorn, Mark F. McGranaghan:
Closed-Loop Solution of Transient Recovery Voltage for Interrupted Induction Motor Starting. 1217-1223 - Yunfeng Xia, Xiangjun Zeng, Yuanyuan Wang, Hongjiang Ma:
Stator Winding Grounding Fault Protection with Third Harmonic Current Difference for Multi-Generator Systems. 1224-1228 - Jim Parrish, Steve Moll, Richard C. Schaefer:
Plant Efficiencies Benefit by Selection of Synchronous Motor. 1229-1237 - Dwight Hulin, Rasheek Rifaat:
Applications of Distance Protection Schemes for a Forked Inter-Tie between Industrial Cogeneration and a Large Utility: Tips, Tricks and Traps. 1238-1243 - Giuseppe Parise, Luigi Martirano, Simone Pierdomenico:
An Adaptive Criterion to Design the Lighting System in the Road Tunnels. 1244-1248 - Saleh A. Saleh, M. A. Rahman:
Development and Experimental Testing of a 3φ Resolution-Level Controlled WM Inverter-Fed Induction Motor. 1249-1256 - Nnamdi A. Okaeme, Pericle Zanchetta, Mark Sumner:
Robust Control Design through Experimental Load Identification for Variable Speed Drives. 1257-1264 - Wei Qiao, Liyan Qu, Ronald G. Harley:
Control of IPM Synchronous Generator for Maximum Wind Power Generation Considering Magnetic Saturation. 1265-1272 - Thierry Boileau, Mohammad Ali Shamsi, Babak Nahid-Mobarakeh, Farid Meibody-Tabar:
A Novel Mechanical Sensorless Control for PMSM Tolerant to Stator Resistance Uncertainties. 1273-1279 - M. Abdesh S. K. Khan, M. A. Rahman:
Implementation of a New Wavelet Controller for Interior Permanent Magnet Motor Drives. 1280-1287 - Vincenzo Delli Colli, Roberto Di Stefano, Fabrizio Marignetti, Maurizio Scarano:
Gate-Level Simulation of a FPGA-Based PMSM Drive Sensorless Control. 1288-1292 - Shuangxia Niu, K. T. Chau, Dong Zhang, J. Z. Jiang, Zheng Wang:
Design and Control of a Double-Stator Permanent-Magnet Motor Drive for Electric Vehicles. 1293-1300 - Yeon-Su Kim, Seung-Ki Sul:
Torque Control Strategy of an IPMSM Considering the Flux Variation of the Permanent Magnet. 1301-1307 - Song Chi, Zheng Zhang, Longya Xu:
A Robust, Efficiency Optimized Flux-Weakening Control Algorithm for PM Synchronous Machines. 1308-1314 - Gi-Young Choi, Mu-Shin Kwak, Tae-Suk Kwon, Seung-Ki Sul:
Novel Flux-Weakening Control of an IPMSM for Quasi Six-Step Operation. 1315-1321 - Nathaniel R. Brown, Thomas M. Jahns, Robert D. Lorenz:
Power Converter Design for an Integrated Modular Motor Drive. 1322-1328 - Suman Dwari, Leila Parsa:
Disturbance Free Operation of Permanent Magnet Motor Drives Under Short Circuit Faults Using Center-Split Winding. 1329-1334 - Gianmario Pellegrino, Eric Armando, Paolo Guglielmi:
Optimal exploitation of the Constant Power Region of IPM Drives Based on Field Oriented Control. 1335-1340 - Joseph Sottile, Anup Tripathi, Thomas Novak:
Best Practices for Implementing High-Resistance Grounding in Mine Power Systems. 1341-1347 - Xiangjun Zeng, Yunfeng Xia, Hongjiang Ma, Yuanyuan Wang:
Grounding Faulted Feeder Detection Methods Applied in Chinese Ineffectively Earthed Distribution Systems. 1348-1352 - Thomas H. Dubaniewicz Jr.:
The Brookwood Disaster and Electrical Requirements for Hazardous (Classified) Locations. 1353-1359 - Jorge Pontt, José Rodríguez, Juan M. San Martin, Ricardo P. Aguilera:
Mitigation of Sympathetic Interaction between Power Transformers fed by long Over Head Lines caused by Inrush Transient Currents. 1360-1363 - Gerald T. Homce, James C. Cawley:
Understanding and Quantifying Arc Flash Hazards in the Mining Industry. 1364-1372 - James C. Cawley, Gerald T. Homce:
Protecting Miners from Electrical Arcing Injury. 1373-1380 - Thomas Novak:
Safety Analysis of Trailing Cables Used on 2400-V Continuous Mining Machines. 1381-1388 - M. B. Gerber, J. A. Ferreira:
A System Integration Philosophy for Demanding Requirements in Power Electronics. 1389-1396 - Youcef Berrouche, Yvan Avenas, Christian Schaeffer, Ping Wang, Hsueh-Chia Chang:
Design of a Porous Electroosmotic Pump, Used in Power Electronics Cooling. 1397-1403 - S. Mandray, Jean-Michel Guichon, Jean-Luc Schanen, Michel Mermet, Jean-Marc Dienot:
Electromagnetic Considerations for Designing Double-Sided Power Modules. 1404-1411 - Lora Kamenova, Yvan Avenas, Christian Schaeffer, Slaska Tzanova, Georges Kapelski, J. Schulz-Harder:
DBC Technology for Extremely Thin Flat Heat Pipes. 1412-1418 - M. Vassilev, Y. Avenas, Christian Schaeffer, Jean-Luc Schanen, J. Schulz-Harder:
Experimental Study of a Pulsating Heat Pipe with Combined Circular and Square Section Channels. 1419-1425 - Erik R. Olson, Robert D. Lorenz:
Effective Use of Miniature, Multi-Point, Field-Based Current Sensors without Magnetic Cores. 1426-1433 - Ying-Chun Chuang, Hsien-Wen Chen:
A Novel Single-Stage High-Power-Factor Electronic Ballast with Boost Topology for Multiple Fluorescent Lamps. 1434-1441 - Ying-Chun Chuang, Yu-Lung Ke, Hung-Shiang Chuang:
Battery-Operated Electronic Ballast of Fluorescent Lamps for Photovoltaic Applications. 1442-1449 - Aldo Canova, Luca Giaccone, Filippo Spertino, Michele Tartaglia:
Electrical Impact of Photovoltaic Plant in Distributed Network. 1450-1455 - Aldo Canova, Claudio Cavallero, Fabio Freschi, Luca Giaccone, Maurizio Repetto, Michele Tartaglia:
Comparative Economical Analysis of a Small Scale Trigenerative Plant: A Case Study. 1456-1459 - Emmanuel B. Agamloh:
The Partial Load Efficiency of Induction Motors. 1460-1466 - Teruyuki Hakoda, Takuji Kojima, Koichi Hirota, Kanae Matsumoto, Akira Mizuno:
Oxidation Process of Xylene in Air under Electron Beam Irradiation with TiO2 and Ag/TiO2. 1467-1473 - Kazuo Hayashi, Hiroyuki Yasui, Motofumi Tanaka, Shigeru Futamura, Satoshi Kurita, Kenichi Aoyagi:
Temperature Dependence of Toluene Decomposition Behavior in the Discharge-Catalyst Hybrid Reactor. 1474-1478 - Tetsuji Oda, Koichi Ono, Ryo Ono:
Non-Thermal Plasma Process for Dilute Trichloroethylene Decomposition with the Help of Manganese-Dioxide Supported Catalyst. 1479-1484 - Masami Sugasawa, Shigeru Futamura:
Synergistic Effect of Nonthermal Plasma and Catalysts on the Decomposition of VOCs. 1485-1488 - Yoshihiro Iitsuka, Hiroki Yamauchi, Graciela Prieto, Kazunori Takashima, Akira Mizuno:
Ammonia Production from Solid Urea Using Non-Thermal Plasma. 1489-1493 - Ryo Ono, Yuya Saito, Akihiro Maekawa, Tetsuji Oda:
Measurement of OH Density and Gas Temperature in Incipient Spark-Ignited Hydrogen-Air Flame. 1494-1498 - Yaping Du, Y. Z. Huan:
Current Distribution in Parallel Single-Core Cables on Metal Tray. 1499-1504 - Soon Lee, Jung-Wook Park:
A Reduced Multivariate Polynomial Model for Estimation of Electric Load Composition. 1505-1511 - Zewen Li, Xianghui Chu, Xiangjun Zeng, Nan Chen:
A New On-line Measurement System of Dielectric Loss Angle for High Voltage Capacitive Apparatus. 1512-1516 - Massimo Mitolo, Giambattista Gruosso, Aldo Canova, Michele Tartaglia:
Evaluation of Voltage Exposures due to AC/DC Stray Currents. 1517-1521 - Ayman M. El-Refaie, Manoj R. Shah, Ronghai Qu, John M. Kern:
Effect of Number of Phases on Losses in Conducting Sleeves of High Speed Surface PM Machine Rotors. 1522-1529 - Gyu-Hong Kang, Young-Dae Son, Gyu-Tak Kim:
The Noise and Vibration Analysis of BLDC Motor Due to Asymmetrical Permanent Magnet Overhang Effects. 1530-1537 - Patrick Ragot, Miroslav Markovic, Yves Perriard:
Analytical Determination of the Phase Inductances for a Brushless DC Motor with Faulhaber Winding. 1538-1543 - Nicola Bianchi, Luigi Alberti, Mircea Popescu, T. J. E. Miller:
MMF Harmonics Effect on the Embedded FE-Analytical Computation of PM Motors. 1544-1551 - Rakib Islam, Iqbal Husain, Abbas Fardoun, Kevin McLaughlin:
Permanent Magnet Synchronous Motor Magnet Designs with Skewing for Torque Ripple and Cogging Torque Reduction. 1552-1559 - Marubini J. Manyage, Pragasen Pillay:
Low Voltage High Current PM Traction Motor Design Using Recent Core Loss Results. 1560-1566 - Po-Tai Cheng, Chien-An Chen, Tzung-Lin Lee, Shen-Yuan Kuo:
A Cooperative Unbalance Compensation Method for Distributed Generation Interface Converters. 1567-1573 - Haimin Tao, Jorge L. Duarte, Marcel A. M. Hendrix:
Control of Grid-Interactive Inverters as Used in Small Distributed Generators. 1574-1581 - N. Ravisekhar Raju:
A Low-Harmonic Diode Rectifier-Fed Drive Using Zero-Sequence Coupling between Machine and Grid. 1582-1584 - Anish Prasai, Deepak Divan:
Zero Energy Sag Correctors - Optimizing Dynamic Voltage Restorers for Industrial Applications. 1585-1592 - Daniel Salomonsson, Ambra Sannino:
Comparative Design and Analysis of Dc-Link-Voltage Controllers for Grid-Connected Voltage-Source Converter. 1593-1600 - Chung-Chuan Hou, Po-Tai Cheng:
An Auxiliary Converter for a Diode Rectifier with Mitigated Circulating Current. 1601-1607 - Luca Corradini, Walter Stefanutti, Paolo Mattavelli:
Analysis of Multi-Sampled Current Control for Active Filters. 1608-1615 - Y. Z. Huan, Yaping Du:
A Novel Shunt Active Power Filter Based on Voltage Detection for Harmonic Voltage Mitigation. 1616-1620 - Rafael Cardoso, João Marcos Kanieski, Humberto Pinheiro, Hilton Abílio Gründling:
Reference Generation for Shunt Active Power Filters Based on Optimum Filtering Theory. 1621-1627 - Ciro Attaianese, Mauro Di Monaco, Vito Nardi, Giuseppe Tomasso:
Motor Side Active Filter (MSAF). 1628-1635 - Leonardo R. Limongi, Radu Bojoi, Giovanni Griva, Alberto Tenconi:
New Control Strategy for Hybrid Power Filters Using Sinusoidal Signal Integrators for Current Reference Generation. 1636-1643 - Rondineli Rodrigues Pereira, Carlos Henrique da Silva, L. E. M. Cavalcanti, Luiz Eduardo Borges da Silva, Germano Lambert-Torres, João O. P. Pinto, Se Un Ahn, Bimal K. Bose:
A Simple Full Digital Adaptive Current Hysteresis Control with Constant Modulation Frequency for Active Power Filters. 1644-1648 - Ahmed Rubaai, Marcel J. Castro-Sitiriche, Abdul R. Ofoli:
DSP-Based Implementation of Fuzzy-PID Controller Using Genetic Optimization for High Performance Motor Drives. 1649-1656 - Joy Mazumdar, Ronald G. Harley, Franklin C. Lambert, Ganesh K. Venayagamoorthy:
Change in Voltage Distortion Predictions at the PCC Due to Changing Nonlinear Load Current Profile Using Plant Startup Data. 1657-1664 - Seung-Mook Baek, Jung-Wook Park, Ian A. Hiskens:
Optimal Tuning for Linear and Nonlinear Parameters of Power System Stabilizers in Hybrid System Modeling. 1665-1672 - Md. Muminul Islam Chy, M. Nasir Uddin:
A Novel Fuzzy Logic Controller Based Torque and Flux Controls of IPM Synchronous Motor. 1673-1680 - Hussein Farid E. Soliman, Malik E. Elbuluk:
Direct Torque Control of a Three Phase Induction Motor using a Hybrid PI/Fuzzy Controller. 1681-1685 - S. M. N. Hasan, Iqbal Husain, Robert J. Veillette, Joan E. Carletta:
A PM Brushless DC Starter/Generator System for a Series-Parallel 2x2 Hybrid Electric Vehicle. 1686-1693 - Fabio Giulii Capponi, R. Terrigi, Federico Caricchi, L. Del Ferraro:
Active Output Voltage Regulation for an Ironless Axial-Flux PM Automotive Alternator with Electromechanical Flux Weakening. 1694-1701 - Chunhua Liu, K. T. Chau, J. Z. Jiang, Xinhua Liu, Zheng Wang:
Design and Control of a Doubly-Excited Permanent-Magnet Brushless Integrated-Starter-Generator for Hybrid Electric Vehicles. 1702-1709 - Longya Xu, Yuan Zhang, Xuhui Wen:
Multi-Operational Modes and Control Strategies of Dual Mechanical Port Machine for Hybrid Electrical Vehicles. 1710-1717 - Nii-Adotei Parker-Allotey, Chee Yeow Leong, Richard A. McMahon, Patrick R. Palmer, Angus T. Bryant, William G. Dunford:
Development and Testing of a Drive System for Electric Vehicles. 1718-1725 - Tony O'Gorman, Dennis Stephens, Ted Bohn, Richard Carlson:
Automotive Alternator Synchronous Rectification Via Self-Sensing Method for Improved Vehicle Fuel Consumption. 1726-1730 - A. Cetin, H. F. Bilgin, A. Açik, Turan Demirci, Kemal Nadir Kose, A. Terciyanli, Burhan Gültekin, N. Aksoy, Bilge Mutluer, Isik Çadirci, Muammer Ermis, K. Ongan, N. Akinci:
Reactive Power Compensation of Coal Conveyor Belt Drives by Using D-STATCOMs. 1731-1740 - Jorge Pontt, José Rodríguez, Juan M. San Martin, Ricardo P. Aguilera, Jaime Rebolledo, Juan W. Dixon:
Up-Rating of Electrical Drives in Mining Installations. 1741-1745 - Pablo E. Aqueveque, Eduardo P. Wiechmann, Rolando P. Burgos:
Short-Circuit Detection for Electrolytic Processes Employing Optibar Intercell Bars. 1746-1751 - Galina Mirzaeva, Colin Coates:
A High Performance Drive For the Rotary Coal Breaker Application. 1752-1759 - Joy Mazumdar, Walter G. Koellner, Andreas Holweck:
Design and Implementation Issues of Active Front End based Systems in Mining Draglines. 1760-1765 - Luis Nieto C., Markus Ahrens:
Gearless Mill Drive Protection Improvements and Its Behavior at Minera Escondida Ltda. 1766-1772 - Girish R. Kamath:
An Electrical Circuit based 3-D Steady State Thermal Model of a Fan Cooled 60 Hz, 20 kW 3-Phase Plasma Cutting Power Supply Transformer. 1773-1780 - Brendan J. Lyons, John G. Hayes, Michael G. Egan:
Experimental Investigation of Iron-based Amorphous Metal and 6.5% Silicon Steel for High-Current Inductors in Low-Medium Frequency DC-DC Converters. 1781-1786 - Xavier Margueron, Jean-Pierre Keradec, A. Besri:
Current Sharing Between Parallel Turns of a Planar Transformer: Prediction and Improvement Using a Circuit Simulation Software. 1787-1793 - Xavier Margueron, Jean-Pierre Keradec, A. Besri:
Complete Analytical Calculation of Static Leakage Parameters. Application to HF Transformer Optimization. 1794-1801 - Lixiang Wei, Richard A. Lukaszewski:
Analysis of Strap Losses for High Power High Frequency Inductors. 1802-1809 - Charles R. Sullivan, Annette Muetze:
Simulation Model of Common-Mode Chokes for High-Power Applications. 1810-1815 - Lixiang Wei, Richard A. Lukaszewski:
Optimization of the Main Inductor in a LCL Filter for Three Phase Active Rectifier. 1816-1822 - D. Mahinda Vilathgamuwa, Poh Chiang Loh, M. Nasir Uddin:
Transient Modelling and Control of Z-Source Current Type Inverter. 1823-1830 - L. Della Flora, Hilton Abílio Gründling:
Adaptive Acceleration Control of an AC Power Source-Fed Electrodynamic Shaker. 1831-1836 - Gerardo Escobar, Andres A. Valdez, Misael F. Martínez-Montejano, Victor M. Rodríguez-Zermeño:
A Model-Based Controller for the Cascade Multilevel Converter Used as a Shunt Active Filter. 1837-1843 - Md. Muminul Islam Chy, M. Nasir Uddin:
Development and Implementation of a New Adaptive Intelligent Speed Controller for IPMSM Drive. 1844-1851 - Peng Xiao, Ganesh K. Venayagamoorthy, Keith A. Corzine, Robert Woodley:
Self-Healing Control with Multifunctional Gate Drive Circuits for Power Converters. 1852-1858 - Tingfang Yang, Xiangjun Zeng, Pei Liu, T. O. Ting, H. R. Cai:
Design of Multi-Function Monitoring Integrated Device in Power System. 1859-1863 - Masaaki Okubo, Tomoyuki Kuroki, Keiichiro Yoshida, Toshiaki Yamamoto:
Simultaneous Reduction of Diesel Particulate and NOx Using Oxygen-Poor Nonthermal Plasma Application. 1864-1870 - Keiichiro Yoshida, Adrian Mihalcioiu, Masaaki Okubo, Tomoyuki Kuroki, Toshiaki Yamamoto:
NOx Aftertreatment System for Diesel Engine Emission Using Thermal Desorption and Plasma Reduction Combined Process. 1871-1876 - Adrian Mihalcioiu, Keiichiro Yoshida, Masaaki Okubo, Tomoyuki Kuroki, Toshiaki Yamamoto:
Design Factors for NOx Reduction in Nitrogen Plasma. 1877-1880 - Takayuki Ohshima, Tomomi Kondo, Masayuki Sato, Nobuyoshi Kitajima:
Adsorption and Plasma Decomposition of Gaseous Acetaldehyde on Fibrous Activated Carbon. 1881-1886 - Kazuo Shimizu, Takeki Sugiyama, Manisha Nishamani L. S., Masaki Kanamori:
Application of Micro Plasma for NOx Removal. 1887-1892 - Amruthur D. Srinivasan, Bangalore S. Rajanikanth:
Pulsed Plasma Treatment for NOx Reduction from Filtered/Unfiltered Stationary Diesel Engine Exhaust. 1893-1900 - J. Marcos Alonso, Carlos Ordíz, Marco A. Dalla Costa, Javier Ribas, Jesús Cardesín Miranda:
High Voltage Power Supply for Ozone Generation Based on Piezoelectric Transformer. 1901-1908 - Rijaniaina N. Andriamalala, Hubert Razik, Gaetan Didier, Maurício Beltrão de Rossiter Correa, François-Michel Sargos:
An Accurate Model by Using the Legendre Polynomial Functions of a Dual Stator Induction Machine Dedicated to the Static Eccentricity Diagnosis. 1909-1916 - Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino:
Diagnosis of Broken Bar Fault in Induction Machines Using Discrete Wavelet Transform without Slip Estimation. 1917-1922 - Jangho Yun, Kwanghwan Lee, Kwangwoon Lee, Sang Bin Lee, Jiyoon Yoo:
Detection and Classification of Stator Turn Faults and High Resistance Electrical Connections for Induction Machines. 1923-1931 - Jose A. Antonino-Daviu, Martin Riera-Guasp, Jose Roger-Folch, Rafael B. Pérez:
An Analytical Comparison between DWT and Hilbert-Huang-Based Methods for the Diagnosis of Rotor Asymmetries in Induction Machines. 1932-1939 - Mohamed El Kamel Oumaamar, Abdelmalek Khezzar, Mohamed Boucherma, Hubert Razik, Rijaniaina N. Andriamalala, Lotfi Baghli:
Neutral Voltage Analysis for Broken Rotor Bars Detection in Induction Motors Using Hilbert Transform Phase. 1940-1947 - Dhaval Shah, Subhasis Nandi, Prabhakar Neti:
Stator Inter-Turn Fault Detection of Doubly-Fed Induction Generators Using Rotor Current and Search Coil Voltage Signature Analysis. 1948-1953 - Zheng Wang, K. T. Chau:
Design and Analysis of a Chaotic PWM Inverter for Electric Vehicles. 1954-1961 - Maurizio Cirrincione, Marcello Pucci, Gianpaolo Vitale:
New Direct Power Control Strategies of Three-Phase VSIs for the Minimization of Common-Mode Emissions in Distributed Generation Systems. 1962-1973 - Brendan P. McGrath, Donald Grahame Holmes:
Analytical Determination of the Capacitor Voltage Balancing Dynamics for Three Phase Flying Capacitor Converters. 1974-1981 - I. W. Jaskulski, I. J. Gabe, Jean Patric da Costa, Márcio Stefanello, Humberto Pinheiro:
A Comparison of High Power Multi-Leg Voltage Fed Converters Modulated by Space Vector and Geometric Approach. 1982-1987 - Yu Ma, Xinke Wu, Junming Zhang, Zhaoming Qian:
ZVZCS Full Bridge Dc-Dc Converter with Reduced Circulating Loss and Filter Requirement. 1988-1992 - Giorgio Spiazzi, Leopoldo Rossetto, Paolo Mattavelli, Paolo Cova, Nicola Delmonte:
Layout Considerations and Thermal Analysis of a 1.8 MHz Resonant VRM. 1993-2000 - Robert M. Cuzner, Ashish R. Bendre, Peter J. Faill, Boris Semenov:
Implementation of a Non-Isolated Three Level DC/DC Converter Suitable for High Power Systems. 2001-2008 - Fabio Giulii Capponi, P. Santoro, E. Crescenzi:
HBCS Converter: A Bidirectional DC/DC Converter for Optimal Power Flow Regulation in Supercapacitor Applications. 2009-2015 - Yukinori Tsuruta, Martin Pavlovsky, Atsuo Kawamura:
Conditions Limiting the Formation of the ZVZCT Switching in SAZZ Converter. 2016-2021 - Haimin Tao, Jorge L. Duarte, Marcel A. M. Hendrix:
High-Power Three-Port Three-Phase Bidirectional DC-DC Converter. 2022-2029 - Fernando Briz, Michael W. Degner, Juan M. Guerrero, Alberto B. Diez:
Temperature Estimation in Inverter Fed Machines Using High Frequency Carrier Signal Injection. 2030-2037 - Tetsuma Hoshino, Jun-Ichi Itoh, Takayuki Kaneko:
Dead-Time Voltage Error Correction with Parallel Disturbance Observers for High Performance V/f Control. 2038-2044 - Jung-Sik Yim, Seung-Ki Sul, Bon-Ho Bae, Nitin Patel, Silva Hiti:
Control Issues of High Pole Count Machines at High Speed Operation. 2045-2049 - Galina Mirzaeva, Robert Eric Betz:
Parameter Sensitivity Issues in Natural Field Orientation. 2050-2057 - Michael C. Harke, Juan M. Guerrero, Michael W. Degner, Fernando Briz, Robert D. Lorenz:
Current Measurement Gain Tuning Using High Frequency Signal Injection. 2058-2065 - Kum-Kang Huh, Robert D. Lorenz:
Discrete-Time Domain Modeling and Design for AC Machine Current Regulation. 2066-2073 - Eduardo P. Wiechmann, Aníbal S. Morales, Pablo E. Aqueveque, Rolando P. Burgos:
Measurement of Cathodic Currents in Equipotential Inter-Cell Bars for Copper Electrowinning and Electrorefining Plants. 2074-2079 - Xiangjun Zeng, Yao Xu, Zhanglei Liu, Hongjiang Ma:
Measuring Methods of Ground Capacitance for Distribution Systems. 2080-2085 - Roy S. Nutter Jr.:
Underground Coal Mine Communications and Tracking Status SAGO Plus One Year. 2086-2089 - John J. Sammarco, Timothy Lutz:
Visual Performance for Incandescent and Solid-State Cap Lamps in an Underground Mining Environment. 2090-2095 - William H. Schiffbauer, Michael R. Yenchek, Timothy Lutz:
Remote Vision System for Dozers on Coal Stockpiles. 2096-2101 - Chad O. Hargrave, NNicholas V. Z. Shuley, Jonathon C. Ralston, David W. Hainsworth:
Radar Level Sensor for Longwall Creep and Retreat Measurement. 2102-2109 - Giuseppe Parise, Robert E. Nabours, Bruce McClung:
Relevance of Competence in Risk Reduction for Electrical Safety. 2110-2114 - Antony C. Parsons, W. Blane Leuschner, Kevin X. Jiang:
Simplified Arc-Flash Hazard Analysis Using Energy Boundary Curves. 2115-2121 - Massimo Mitolo:
Safety and Risk Analysis of Standard Protective Measures against Electric Shock. 2122-2127 - Kanu R. Shah, Alan L. Cinsavich, Priyan De Silva:
Impact of Arc Flash Hazards on Medium Voltage Switchgear. 2128-2132 - Peter E. Sutherland:
Arc Flash and Coordination Study Conflict in an Older Industrial Plant. 2133-2138 - Grzegorz Ombach, Jacek Junak:
Design of PM Brushless Motor Taking into Account Tolerances of Mass Production - Six Sigma Design Method. 2139-2146 - Avoki M. Omekanda, Suresh Gopalakrishnan, Harald Klode:
Acoustic Noise of Switched Reluctance and Permanent Magnet Motors: A Comparison in the Context of Electric Brakes. 2147-2153 - Gabriel Gallegos-López, Silva Hiti:
Optimum Current Control in the Field-Weakened Region for Permanent Magnet AC Machines. 2154-2160 - Ewgenij Starschich, Annette Muetze:
Operating Area Analysis of Direct and Geared Brushless-DC Motor Drives for Electric Bicycles. 2161-2168 - Jiaxin Chen, Youguang Guo, Jianguo Zhu, Jianxun Jin:
Performance Analysis of a Surface Mounted Permanent Magnet Brushless DC Motor using an Improved Phase Variable Model. 2169-2174 - Tae-Suk Kwon, Seung-Ki Sul, Luigi Alberti, Nicola Bianchi:
Design and Control of an Axial Flux Machine for a Wide Flux-Weakening Operation Region. 2175-2182 - Charles G. Noll:
Standards for Industrial Electrostatic Processes. 2183-2187 - William D. Greason:
Effect of Charge Injection due to ESD on the Operation of MEMS. 2188-2193 - Ulrich von Pidoll:
Dependency of the Transferred Charge of Provoked Discharges from Insulated Surfaces on Temperature and Humidity. 2194-2198 - Yoshio Higashiyama, M. Kosano:
Relation between Extension of a Filamentary Channel from a Water Droplet Placed on a Hydrophobic Sheet under AC Field and Flashover via the Droplet. 2199-2203 - X. Ojeda, Mohamed Gabsi, Michel Lecrivain, Xavier Mininger:
Noise Reduction Using Piezoelectric Active Control on High Speeds Switched Reluctance Drives. 2204-2209 - Cheewoo Lee, Ramu Krishnan, Nimal S. Lobo:
Novel Two-phase Switched Reluctance Machine using Common-Pole E-Core Structure: Concept, Analysis, and Experimental Verification. 2210-2217 - Jaehyuck Kim, R. Krishnan:
Novel Two-Switch Based Switched Reluctance Motor Drive for Low-Cost Applications. 2218-2225 - H. S. Lim, R. Krishnan:
Novel Measurement Disturbance Rejection Current Control for Linear Switched Reluctance Motor Drives. 2226-2233 - Prabhakar Neti, Subhasis Nandi:
An Improved Strategy to Detect Stator Inter-Turn Faults in Reluctance Synchronous Machines Using Both Negative Sequence Quantities and Stored Magnetic Energy After Supply Disconnection. 2234-2241 - Salman Talebi, Peyman Niazi, Hamid A. Toliyat:
Design of Permanent Magnet-Assisted Synchronous Reluctance Motors Made Easy. 2242-2248 - Alberto Bellini:
Quad Demodulation: A Time Domain Diagnostic Method for Induction Machines. 2249-2253 - Fernando Briz, Michael W. Degner, Pablo Garcia, David Bragado:
Broken Rotor Bar Detection in Line-Fed Induction Machines Using Complex Wavelet Analysis of Startup Transients. 2254-2261 - Ahmed Sayed-Ahmed, Gennadi Y. Sizov, Nabeel A. O. Demerdash:
Diagnosis of Inter-Turn Short Circuit for a Polyphase Induction Motor in Closed-Loop Vector-Controlled Drives. 2262-2268 - Waqas M. Arshad, Sami Kanerva, Silvia Bono, Massimo Menescardi, Holger Persson:
Medium-Large Induction Machines Starting Currents: Scaling Accuracy & Saturation Uncertainties. 2269-2276 - Liling Sun, Boqiang Xu:
An Improvement of Stator Current Based Detection of Bearing Fault in Induction Motors. 2277-2281 - Po-Shen Chen, Yen-Shin Lai:
New EMI Filter Design Method for Single Phase Power Converter using Software-Based Noise Separation Method. 2282-2288 - Gustavo Malagoni Buiatti, Acácio M. R. Amaral, António J. Marques Cardoso:
ESR Estimation Method for DC/DC Converters Through Simplified Regression Models. 2289-2294 - Jiaxin Chen, Youguang Guo, Jianguo Zhu, Jianxun Jin:
Heavy Load Simulation Model of Flyback Switching DC-DC Converters and its Application for Reliability Improvement. 2295-2302 - Jian-Feng Zhao, Shi-Feng Pan, Xun Wang:
High Power Energy Feedback AC Electronic Load and its Application in Power System Dynamic Physical Simulation. 2303-2310 - Feng Gao, Poh Chiang Loh, Frede Blaabjerg, Remus Teodorescu, D. Mahinda Vilathgamuwa:
Component-Minimized Buck-Boost Voltage Source Inverters. 2311-2318 - Beno Klopcic, Gorazd Stumberger, Drago Dolinar:
Iron Core Saturation of a Welding Transformer in a Medium Frequency Resistance Spot Welding System Caused by the Asymmetric Output Rectifier Characteristics. 2319-2326 - Xinping Ding, Zhaoming Qian, Shuitao Yang, Bin Cui, Fangzheng Peng:
A New Adjustable-Speed Drives (ASD) System Based on High-Performance Z-Source Inverter. 2327-2332 - Aluisio A. M. Bento, Edison R. C. da Silva:
Hybrid One-Cycle Controller for Boost PFC Rectifier. 2333-2339 - Márcio Stefanello, Humberto Pinheiro, Hilton Abílio Gründling:
Multi-Rate Repetitive Controller for UPS Applications. 2340-2345 - Tsutomu Kominami, Yasutaka Fujimoto:
A Novel Nine-Switch Inverter for Independent Control of Two Three-Phase Loads. 2346-2350 - Yen-Shin Lai, Chia-An Yeh, Ye-Then Chang, Ko-Yen Lee:
New Self-Commissioning Digital Power Converter with Peak Current Mode Control and Leading Edge Modulation using Low Sampling Frequency A/D Converter. 2351-2356 - Yi Li, Zi-Qiang Zhu, David Howe, Christopher M. Bingham, David A. Stone:
Improved Rotor Position Estimation by Signal Injection in Brushless AC Motors, Accounting for Cross-Coupling Magnetic Saturation. 2357-2364 - Chan-Hee Choi, Jul-Ki Seok:
Pulsating Signal Injection-Based Sensorless Control of PMSM Using Injection Axis Switching Scheme without Additional Offline Commissioning Test. 2365-2370 - Antti Piippo, Kalle Suomela, Marko Hinkkanen, Jorma Luomi:
Sensorless PMSM Drive with DC-link Current Measurement. 2371-2377 - Zi-Qiang Zhu, Yi Li, David Howe, Christopher M. Bingham, David A. Stone:
Influence of Machine Topology and Cross-Coupling Magnetic Saturation on Rotor Position Estimation Accuracy in Extended Back-EMF Based Sensorless PM Brushless AC Drives. 2378-2385 - Yukinori Inoue, Koji Yamada, Shigeo Morimoto, Masayuki Sanada:
Expanding the Operating Speed Range of Model-Based Sensorless Control for IPMSMs. 2386-2392 - Kan Akatsu, Michael C. Harke, Robert D. Lorenz:
SPMSM Design Considerations for Initial Position and Magnet Polarity Estimation using Carrier Signal Injection. 2393-2398 - David Reigosa, Pablo Garcia, Dejan Raca, Fernando Briz, Robert D. Lorenz:
Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless-Controlled IPM Synchronous Machines. 2399-2406 - Ambra Sannino, Lars Liljestrand, Bengt Rothman, Tom Nestli, Martin Kjäll-Ohlsson, Per-Erik Holsten:
All-Electric LNG Liquefaction Plants: Technical Challenges and Possible Concept Solutions. 2407-2413 - Daniel Salomonsson, Lennart Söder, Ambra Sannino:
An Adaptive Control System for a dc Microgrid for Data Centers. 2414-2421 - Antoine Béguin, Philippe Allenbach, Stefan Keller, Jean-Jacques Simond, Sven Brausewetter, Jiri Koutník:
Hardware-in-the-Loop Simulation Software for Regulator Tests and Optimization. 2422-2428 - Kenneth Scot Smith, Li Ran:
Torsional Resonance Risk Management in Islanded Industrial Power Systems Supplying Large VFDs. 2429-2438
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-11-11 22:55 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
