![](https://dblp.org/img/logo.ua.320x120.png)
![](https://dblp.org/img/dropdown.dark.16x16.png)
![](https://dblp.org/img/peace.dark.16x16.png)
Остановите войну!
for scientists:
![search dblp search dblp](https://dblp.org/img/search.dark.16x16.png)
![search dblp](https://dblp.org/img/search.dark.16x16.png)
default search action
International Journal of Automation Technology, Volume 7
Volume 7, Number 1, January 2013
- Takashi Matsumura:
Editorial: Process Simulation. 5 - Keiichi Shirase, Keiichi Nakamoto:
Simulation Technologies for the Development of an Autonomous and Intelligent Machine Tool. 6-15 - Akinori Yamanaka
, Tomohiro Takaki
:
Simulation of Microstructure Evolution and Deformation Behavior for Dual-Phase Steel by Multi-Phase-Field Method and Elastoplastic Finite Element Method. 16-23 - Keisuke Kishida, Toshihiko Nakamura, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru:
Basic Study on Laser Forming of Curved Surfaces with Simulation. 24-29 - Takashi Matsumura, Motohiro Shimada, Kazunari Teramoto, Eiji Usui:
Predictive Cutting Force Model and Cutting Force Chart for Milling with Cutter Axis Inclination. 30-38 - Hirohisa Narita:
A Determination Method of Cutting Coefficients in Ball End Milling Forces Model. 39-44 - Lin Lu, Masahiko Sato, Hisataka Tanaka:
Experimental Verification of Chatter-Free Ball End Milling Strategy. 45-51 - Theodoros Vasilopoulos, Kaan Erkorkmaz, Fathy Ismail, Robert M. Pilliar:
Modeling, Simulation, and Optimization of Machining Polymer Infiltrated Calcium Polyphosphate. 52-70 - Sze Keat Chee, Hirofumi Suzuki, Junchi Uehara, Takeshi Yano, Toshiro Higuchi, Weimin Lin:
A Low Contact Force Polishing System for Micro Molds that Utilizes 2-Dimensional Low Frequency Vibrations (2DLFV) with Piezoelectric Actuators (PZT) and a Mechanical Transformer Mechanism. 71-82 - Keiichi Ota, Atsushi Matsubara, Hajime Mizuyama:
A Study on Analytical Modeling for Machine Tool Production. 83-85
- Seiji Katayama:
Editorial: Progress in Welding Processes. 87 - Naoki Asakawa, Yoshihiro Kanjo:
Collision Avoidance of a Welding Robot for a Large Structure (Application of Human Experience). 88-94 - Yukinori Hirota, Yasushi Mukai, Atsuhiro Kawamoto, Junji Fujiwara:
Newly Developed Controls for Arc Welding Robot. 95-102 - Shun Izutani, Kei Yamazaki, Reiichi Suzuki, Yuji Ueda, Kazuki Nakamura, Toshiro Uezono:
Blowhole Generation Phenomenon and Quality Improvement in GMAW of Galvanized Steel Sheet. 103-108 - Terumi Nakamura
, Kazuo Hiraoka:
Improvement of Welding Stability and Toughness Using Gas Metal Arc Welding in Pure Ar Shielding Gas. 109-113 - Hitomi Nishibata, Shota Kikuchi, Manabu Fukumoto, Masato Uchihara:
Single-Side Resistance Spot Welding Process for Joining Pipes and Sheets. 114-119
- Vitchuda Lertphokanont, Atsushi Nakayama, Minoru Ota, Kai Egashira, Keishi Yamaguchi, Naomi Kawada:
Development of Deburring Technology with Whirling EDM. 121-127 - Yoshitaka Tanimizu, Chisato Ozawa, Yusuke Shimizu, Buntaro Orita, Koji Iwamura, Nobuhiro Sugimura:
Flexible Multi-Layered Dynamic Supply Chain Models with Cooperative Negotiation. 128-135
Volume 7, Number 2, March 2013
- Dante J. Dorantes-Gonzalez:
Editorial: Precision Positioning and Measurement Technologies. 147 - Ryogen Fujiwara, Tadahiko Shinshi, Minoru Uehara:
Positioning Characteristics of a MEMS Linear Motor Utilizing a Thin Film Permanent Magnet and DLC Coating. 148-155 - Kuang-Chao Fan, Ke Zhang, You-Liang Zhang, Qing Zhang:
Development of a Non-Contact Focusing Probe for the Measurement of Micro Cavities. 156-162 - Le Song, Zihui Zhang:
Calibration Method for Stereovision Measurement of High-Temperature Components Using Two Infrared Cameras. 163-170 - Rui-Yin Tang, Zhoumo Zeng, Hong-Kun He, Zhi-Kun Chen:
Planeness Measurement of Computer Harddisk Surface Based on Opto-Mechatronics Technology. 171-175 - Lu-Hua Fu, Heng Zhang, Yan Sun, Na Zhao, Zhong Wang:
Improving the Measurement Reliability of the End Gaps of Piston Rings. 176-181 - Mario Peña-Cabrera, V. Lomas-Barrie, Ismael López-Juárez, Román Osorio-Comparán
:
Contour Object Generation Method for Object Recognition Using FPGA. 182-189 - Naoki Asakawa, Yoshihiro Kanjo:
Collision Avoidance of a Welding Robot for a Large Structure (Application of Potential Field). 190-195 - Chao Zhi, Tadahiko Shinshi, Minoru Uehara:
Design and Analysis of a Thin Film Permanent Magnet Actuated Micro Pump. 196-204 - Tao Zhang, Hao Feng, Zhoumo Zeng:
Acoustic Emission Based Tank Bottom Floor Corrosion Detection. 205-210 - Kun Chen, Xing Fu, Dante J. Dorantes-Gonzalez, Yanning Li, Sen Wu
, Xiaotang Hu:
Laser-Generated Surface Acoustic Wave Technique for Crack Monitoring - A Review. 211-220
- Shinji Shimizu, Yoshiaki Kabaya, Haruhisa Sakamoto, Kenichi Yamashita:
Identification Method of Dynamic Characteristics of Joints in Jointed Structures. 221-227 - Xiangpan Li, Toshiro Noritsugu, Masahiro Takaiwa, Daisuke Sasaki:
Design of Wearable Power Assist Wear for Low Back Support Using Pneumatic Actuators. 228-236 - Guangda Lu, Aimei Zhang, Jing Zhou, Shigang Cui, Li Zhao:
The Statics Analysis and Verification of 3-DOF Parallel Mechanism Based on Two Methods. 237-244
Volume 7, Number 3, May 2013
- Yasuo Yamane:
Editorial: Difficult-to-Cut Materials. 255 - Toshiyuki Obikawa, Tsutomu Sekine:
Fabrication of Miniature Shell Structures of Stainless Steel Foil and Their Forming Limit in Single Point Incremental Microforming. 256-262 - Akira Mizobuchi, Masahiro Masuda, Teruo Nogami, Hitoshi Ogawa, Tohru Ishida:
Restraint of Thermal Crack on Rake Face of Cermet Tool in Intermittent Cutting. 263-269 - Hiroyasu Iwabe, Masanori Futakawa, Masashige Fujiwara, Tsuyoshi Fujita, Kyouhei Kikuchi:
Study on Performance of Radius End Milling Titanium Alloy (Analysis of Cutting Cross-Sectional Area Using 3D-CAD and Experiments of Inclined Surface with Contouring). 270-277 - Kunitaka Kuriyama, Masahiko Fukuta, Katsuhiko Sekiya, Keiji Yamada, Yasuo Yamane:
Applying Constant Pressure Unit to Ductile Mode Cutting of Hard and Brittle Materials. 278-284 - Takashi Inoue, Masahiro Hagino:
Cutting Characteristics of CFRP Materials with Carbon Fiber Distribution. 285-291 - Masahiro Hagino, Takashi Inoue:
Effect of Carbon Fiber Orientation and Helix Angle on CFRP Cutting Characteristics by End-Milling. 292-299 - Hideyuki Tomoda, Koichi Kitajima:
Development of Polishing Fluids for Titanium Alloy Using Lapping Tape - Effects of Components in the Polishing Fluids on Polishing Characteristics -. 300-305 - Hiroshi Usuki, Kazutake Uehara, Masakazu Isaka, Kazuyuki Kubota:
Machining of Inconel 718 with Lubricant-Coated Tool. 306-312 - Ryutaro Tanaka
, Akira Hosokawa, Tatsuaki Furumoto
, Takashi Ueda:
Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel. 313-320 - Hideharu Kato, Tatsuya Shikimura, Yoshitaka Morimoto, Kazuhiro Shintani, Kazuyuki Kubota, Katsuhiro Nakagaki:
Study on High-Efficiency Finish Turning of Carburized Hardened Steel with Driven Rotary Cutting. 321-328 - Hiroki Kiyota, Fumihiro Itoigawa
, Shota Endo, Takashi Nakamura:
Analytical Approach for Optimization of Chamfered Cutting Tool Preparation Considering Built-Up Edge Extrusion Behavior. 329-336 - Daisuke Suzuki
, Fumihiro Itoigawa
, Keiichi Kawata, Takashi Nakamura:
Using Pulse Laser Processing to Shape Cutting Edge of PcBN Tool for High-Precision Turning of Hardened Steel. 337-344 - Jie Xu, Keiji Yamada, Katsuhiko Seikiya, Ryutaro Tanaka
, Yasuo Yamane:
A Basic Study on the Relations Between Machining Conditions and the Static and Dynamic Components of Forces in Drilling. 345-352
- Cai Renye, Huang Jin:
Modeling and Analysis of the Droplet Landing Process in Cell Direct-Writing. 353-358 - Taisei Ise, Masahiro Higuchi, Hiroshi Tachiya:
Development of a Tactile Sensor to Measure Tire Friction Coefficients in Arbitrary Directions. 359-366
Volume 7, Number 4, July 2013
- Eiji Shamoto:
Editorial: Process Machine Interactions. 377 - Berend Denkena
, Felix Flöter:
Adaptive Cutting Force Control with a Hybrid Axis System. 378-384 - Jiwang Yan, Kenta Watanabe, Yutaro Nakagawa:
Fabrication of Thin-Film Fresnel Optics by Combining Diamond Turning and Photolithographic Processes. 385-390 - Jun'ichi Kaneko, Kenichiro Horio:
Fast Cutter Workpiece Engagement Estimation Method for Prediction of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining. 391-400 - Toshihiko Hirooka, Tomokazu Kobayashi, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase:
Surface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation. 401-409 - Tomas Beno, Jari Repo, Lars Pejryd:
The Use of Machine Tool Internal Encoders as Sensors in a Process Monitoring System. 410-417
- Hideki Takezawa
, Tadashi Asano, Naotake Mohri:
Influence of Gap Phenomenon on Various Kinds of Powder-Suspended EDM. 419-425 - Junsuke Fujiwara, Ryuichi Nagaura, Tetsuya Tashiro:
Drilling of CFRP/Ti6Al4V Stack Board. 426-432 - Junsuke Fujiwara, Keisuke Wakao, Takeshi Miyamoto:
Influence of Tungsten-Carbide and Cobalt on Tool Wear in Cutting of Cemented Carbides with Polycrystalline Diamond Tool. 433-438 - Hisato Nakanishi, Naohiro Shichijo, Masao Sugi, Taiki Ogata, Tatsunori Hara, Jun Ota:
Modeling the Process of Animation Production. 439-450
Volume 7, Number 5, September 2013
- Shigeka Yoshimoto, Toshiharu Tanaka:
Editorial: Precision Positioning Technology. 475 - Masatake Shiraishi, Hideyasu Sumiya:
Sensing and Control of Friction in Positioning. 476-481 - Kaiji Sato:
Effect of Multilayering on Thrust Force Characteristics in Compact Linear Switched Reluctance Motors with a Simple Layer Structure. 482-488 - Yung-Tien Liu, Han-Lin Wu, Je-Yi Wang, Yutaka Yamagata:
Contact-Type Profile Measuring Device Using Laser Interferometry System Incorporating Hybrid Actuating System. 489-497 - Shuhei Tsujimura, Yusuke Hashimoto, Takashi Matsuoka, Tomoko Hirayama, Katsumi Sasaki:
Pneumatic Servo Bearing Actuator with Multiple Bearing Pads for Ultraprecise Positioning. 498-505 - Muhummad Madden, Masato Aketagawa, Shuhei Uesugi, Takuya Kumagai, Eiki Okuyama:
Spindle Error Motion Measurement Using Concentric Circle Grating and Phase Modulation Interferometers. 506-513 - Kosuke Ishizaki, Burak Sencer, Eiji Shamoto:
Cross Coupling Controller for Accurate Motion Synchronization of Dual Servo Systems. 514-522 - Yukitoshi Ihara, Takehiro Nagasawa:
Fundamental Study of the On-Machine Measurement in the Machining Center with a Touch Trigger Probe. 523-536 - Shine-Tzong Ho, Yan-Jhang Shin:
Design of a Semi-Oval Shaped Ultrasonic Motor. 537-543 - Takashi Nozaki, Jiro Otsuka:
Reduction of Thermal Deformation in a Motor Precision Positioning Device Cooled by Peltier Elements. 544-549 - Nobuhiko Henmi, Shingo Takeuchi:
New Method Using Piezoelectric Jerk Sensor to Detect Roller Bearing Failure. 550-557 - Akira Kotani, Toshiharu Tanaka, Akira Hirano:
Development of Shock-Wave-Powered Actuators for High Speed Positioning (Second Report: Characteristics of Diaphragmless Shock Tube and Responsiveness of Actuator). 558-563 - Ning Zhu, Shigeomi Koshimizu, Takashi Nozaki, Kenichi Taneishi, Jiro Otsuka, Takeki Shirai, Tetsuhiro Nishide, Tsutomu Togashi:
Decrease of Thermal Expansion of Ball Screw Used for Precision Positioning Devices by Peltier Module Cooling Based on Feedback Method. 564-570
- Kenji Sawada, Seiichi Shin, Kenji Kumagai, Hisato Yoneda:
Optimal Scheduling of Automatic Guided Vehicle System via State Space Realization. 571-580 - Raoul Roth, Beck Lukas, Hartmi Balzer, Friedrich Kuster, Eduardo Weingärtner, Konrad Wegener:
Influence of the Anode Material and the Flushing Gas on the Dry Electrical Discharge Machining Process. 581-592 - Yurie Okugawa, Naoki Asakawa, Masato Okada
:
Development of a System for Measuring the Thickness of Free Curved Plates - Measurement Posture Planning Using C-Space -. 593-600
Volume 7, Number 6, November 2013
- Shigeka Yoshimoto, Toshiharu Tanaka:
Editorial: M4 Processes Micro/Meso Mechanical Manufacturing. 613 - Jingsi Wang
, Keita Shimada
, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
Material Removal During Ultrasonic Machining Using Smoothed Particle Hydrodynamics. 614-620 - Pay Jun Liew, Keita Shimada
, Masayoshi Mizutani, Jiwang Yan, Tsunemoto Kuriyagawa:
Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. 621-629 - Chihiro Nishikawa, Naohide Mizukuchi, Akihiko Tomie, Keita Shimada
, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
Characteristics of Thick Film Deposition in Powder Jet Machining. 630-637 - Tsunehisa Suzuki, Hiroshi Saito:
Machining of Acrylic Resin Using Monocrystalline Diamond Endmill with Cutting Edges Formed by Focused Ion Beam. 638-643 - Wei Hang, Libo Zhou, Jun Shimizu, Ju-long Yuan, Takeyuki Yamamoto:
Study on the Mechanical Properties of Lithium Tantalate and the Influence on its Machinability. 644-653 - Satoshi Kobayashi, Keita Shimada
, Chikashi Murakoshi, Kazunori Koike, Masayuki Takahashi, Toru Tachibana, Tsunemoto Kuriyagawa:
Development of an Ultrasonically-Assisted Electrolytic Grinding System. 654-662 - Yongbo Wu, Weiping Yang, Masakazu Fujimoto, Libo Zhou:
Mirror Surface Finishing of Silicon Wafer Edge Using Ultrasonic Assisted Fixed-Abrasive CMP (UF-CMP). 663-670 - Tomohiro Inada, Libo Zhou, Hirotaka Ojima, Jun Shimizu:
Development of Finishing System Using Acoustically Levitated Abrasive. 671-677 - Ryuichi Kobayashi, Tianfeng Zhou, Keita Shimada
, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes. 678-685 - Jun Shimizu, Libo Zhou, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Han Huang
:
Mold Pattern Fabrication by Nanoscratching. 686-693 - Ichiro Ogura, Kiwamu Ashida, Tetsuo Koga:
Development of Transfer System for Micropress. 694-699 - Takayuki Azuma, Ryo Ito, Shinji Soma, Shinji Murakami, Tsunemoto Kuriyagawa:
Development of Non-Destructive Technology for Detecting Grinding Burns. 700-707 - Yuki Shimizu
, Wenjian Lu, Yuta Ohba, Wei Gao
:
Development of a Micro-Sized Thermal Contact Sensor for Inspection of Surface Defects. 708-713 - So Ito, Zhigang Jia, Shigeaki Goto, Keiichiro Hosobuchi, Yuki Shimizu
, Gaofa He, Wei Gao
:
An Electrostatic Force Probe for Surface Profile Measurement in Noncontact Condition. 714-719 - Tsunehisa Suzuki, Mutsuto Kato, Yoshiki Shimizu:
Fabrication of Titanium-Based Hard Coatings by Atmospheric Microplasma-Metal Organic Chemical Vapor Deposition Using Titanium Tetraisopropoxide. 720-725
- Berend Denkena
, Jörn Ostermann, Jens Köhler, Tobias Mörke, Benjamin Spitschan
:
Product Identification by Machined Micro Patterns. 735-741 - Kevin Kerrigan, Garret E. O'Donnell:
Temperature Measurement in CFRP Milling Using a Wireless Tool-Integrated Process Monitoring Sensor. 742-750 - Kai Xu, Hiroyuki Sasahara:
Generation of Regularly Aligned Dimples on Triangular Pyramidal Patches Using Patch Division Milling. 751-759 - Hidenori Shinno, Hayato Yoshioka, Hiroshi Sawano:
A Framework for Systematizing Machine Tool Engineering. 760-768
![](https://dblp.org/img/cog.dark.24x24.png)
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.