default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDIEEE Transactions on Instrumentation and Measurement, Volume 54
Volume 54, Number 1, February 2005
- T. K. Abdel-Galil, Yasser G. Hegazy, Magdy M. A. Salama, R. Bartnikas:
Fast match-based vector quantization partial discharge pulse pattern recognition. 3-9 - Muhammad Taher Abuelma'atti:
A translinear circuit for sinusoidal frequency division. 10-14 - Massimo Aiello, Antonio Cataliotti
, Valentina Cosentino, Salvatore Nuccio:
A self-synchronizing instrument for harmonic source detection in power systems. 15-23 - Mihaela M. Albu, Alessandro Ferrero, Florin Mihai, Simona Salicone:
Remote calibration using mobile, multiagent technology. 24-30 - Pasquale Arpaia, Gaetano Guerra, Giuseppe Mensitieri, Rosario Schiano Lo Moriello:
A chloroform transducer based on sPS-δ-coated quartz-crystal microbalance for gaseous environment. 31-37 - Johnson A. Asumadu, Ralph Tanner, Jon Fitzmaurice, Michael Kelly, Hakeem Ogunleye, Jake Belter, Song Chin Koh:
A Web-based electrical and electronics remote wiring and measurement laboratory (RwmLAB) instrument. 38-44 - Ying-Wen Bai, Hong-Gi Wei:
Loss waveform interval for the data buffering of a multiple-channel microcomputer-based oscilloscope system. 45-51 - Péter Baranyi, Annamária R. Várkonyi-Kóczy, Yeung Yam, Ron J. Patton:
Adaptation of TS fuzzy models without complexity expansion: HOSVD-based approach. 52-60 - Richard D. Beach, Robert W. Conlan, Markham C. Godwin, Francis Moussy:
Towards a miniature implantable in vivo telemetry monitoring system dynamically configurable as a potentiostat or galvanostat for two- and three-electrode biosensors. 61-72 - Jerome J. Blair:
Selecting test frequencies for sinewave tests of ADCs. 73-78 - Alessandro Burresi, Ada Fort, Santina Rocchi, M. Belén Serrano-Santos, Nicola Ulivieri, Valerio Vignoli:
Temperature profile investigation of SnO2 sensors for CO detection enhancement. 79-86 - Charles B. Cameron, Rosa Nivea Rodriguez, Nathan Padgett, Eugene Waluschka, Semion Kizhner:
Optical ray tracing using parallel processors. 87-97 - Yen-Ting Chen, Kuo-Sheng Cheng, Jia-Kuang Liu, Ji-Jer Huang:
An intelligent view box system for cephalometry. 98-104 - Won-Sup Chung, Hoon Kim, Hyeong-Woo Cha, Hee-Jun Kim:
Triangular/square-wave generator with independently controllable frequency and amplitude. 105-109 - Francisco André Corrêa Alegria, António Manuel da Cruz Serra:
Uncertainty of ADC random noise estimates obtained with the IEEE 1057 standard test. 110-116 - Philippe Crama, Johan Schoukens:
Computing an initial estimate of a Wiener-Hammerstein system with a random phase multisine excitation. 117-122 - Loredana Cristaldi, Alessandro Ferrero, Antonello Monti, Ferdinanda Ponci, William McKay, Roger Dougal:
A virtual environment for remote testing of complex systems. 123-133 - José Antonio de la O. Serna:
Phasor estimation from phasorlets. 134-143 - Fjo De Ridder, Rik Pintelon, Johan Schoukens, David Paul Gillikin:
Modified AIC and MDL model selection criteria for short data records. 144-150 - Leonardo Fabbroni, Marina Vannucci, Elena Cuoco, Giovanni Losurdo, Massimo Mazzoni, Ruggero Stanga:
Wavelet tests for the detection of transients in the VIRGO interferometric gravitational wave detector. 151-162 - Luigi Ferrigno, Vincenzo Paciello, Antonio Pietrosanto:
A Bluetooth-based proposal of instrument wireless interface. 163-170 - Pietro Fiorentin, Paola Iacomussi, Giuseppe Rossi:
Characterization and calibration of a CCD detector for light engineering. 171-177 - Alessandra Flammini, Daniele Marioli, Emiliano Sisinni, Andrea Taroni:
A multichannel DSP-based instrument for displacement measurement using differential variable reluctance transducer. 178-183 - Ömer Nezih Gerek, Dogan Gökhan Ece:
An adaptive statistical method for power quality analysis. 184-191 - G. P. Premasiri Gunarathne, Yasser Qureshi:
Development of a synthetic A-scan technique for ultrasonic testing of pipelines. 192-199 - Gourab Sen Gupta, Chris H. Messom, Serge N. Demidenko:
Real-time identification and predictive control of fast mobile robots using global vision sensing. 200-214 - Clark A. Hamilton, Stuart L. Kupferman, Melquiades T. Salazar, David Deaver, Barry M. Wood:
Interlaboratory comparison at 10 V DC. 215-221 - Bing He, François Cabestaing, Jack-Gérard Postaire, Ruodan Zhang:
Narrow-band frequency analysis for laser-based glass thickness measurement. 222-227 - William Paul Heath:
The variance of nonparametric errors-in-variables estimates. 228-236 - Fatimah Ibrahim, Mohd Nasir Taib, Wan Abu Bakar Wan Abas, Chan Chong Guan, Saadiah Sulaiman:
A novel approach to classify risk in dengue hemorrhagic fever (DHF) using bioelectrical impedance analysis (BIA). 237-244 - Mehdi Jafaripanah, Bashir M. Al-Hashimi, Neil M. White:
Application of analog adaptive filters for dynamic sensor compensation. 245-251 - Wout Joseph, Luc Martens:
An improved method to determine the antenna factor. 252-257 - Julia Kantz, Jan Waldmann, Friedrich M. Landstorfer:
Measuring system for time-variant impedances. 258-263 - Seong-Ho Kong, Reinoud F. Wolffenbuttel:
Spectral performance of a micromachined infrared spectrum analyzer in silicon. 264-267 - Waldemar G. Kürten Ihlenfeld, Enrico Mohns:
Speeding-up AC-DC transfer measurements with thermal converters. 268-272 - Changsheng Li, Xiang Cui, Ichirou Yamaguchi, Masayuki Yokota, Toshihiko Yoshino:
Optical voltage sensor using a pulse-controlled electrooptic quarter waveplate. 273-277 - Mingfu Li, Chia-Shu Liao, Jeng-Kuang Hwang:
Fast computation of maximum time interval error for telecommunications clock stability characterization. 278-283 - Weibo Li, Chengxiong Mao, Jiming Lu:
Study of the virtual instrumentation applied to measure pulsed heavy currents. 284-288 - Xiaoli Li:
Development of current sensor for cutting force measurement in turning. 289-296 - Kuo-Huang Lin, Bin-Da Liu:
A gray system modeling approach to the prediction of calibration intervals. 297-304 - Kenji Nakahira, Tetsuji Kodama, Takeshi Furuhashi, Hiroshi Maeda:
Design of digital polarity correlators in a multiple-user sonar ranging system. 305-310 - Christof Olivier, Luc Martens:
Optimal settings for narrow-band signal measurements used for exposure assessment around GSM base stations. 311-317 - Rik Pintelon, István Kollár:
On the frequency scaling in continuous-time modeling. 318-321 - Octavian Adrian Postolache, P. M. B. Silva Girao, José Miguel Dias Pereira, Helena Maria Geirinhas Ramos:
Self-organizing maps application in a remote water quality monitoring system. 322-329 - Oliver Power, James E. Walsh:
Investigation of the long- and medium-term drift of Zener diode-based voltage standards. 330-336 - Fazlur Rahman, Arun Kumar, Gangadharan Nagendra, Gourab Sen Gupta:
Network approach for physiological parameters measurement. 337-346 - Jorge Rodríguez-Asomoza, Roberto Rosas-Romero, Salvador E. Lobato-Larios, Rubén Alejos Palomares, Juan Antonio Navarro Martínez, Celso Gutiérrez-Martínez:
Electric signal sensor using an electrooptic coherence modulator. 347-351 - Fabrizio Russo, Annarita Lazzari:
Color edge detection in presence of Gaussian noise using nonlinear prefiltering. 352-358 - Giovanna Sansoni, Franco Docchio:
3-D optical measurements in the field of cultural heritage: the case of the Vittoria Alata of Brescia. 359-368 - Zachary D. Schwartz, Alan N. Downey, Samuel A. Alterovitz, George E. Ponchak:
High-temperature RF probe station for device characterization through 500°C and 50 GHz. 369-376 - Zbigniew Staroszczyk:
A method for real-time, wide-band identification of the source impedance in power systems. 377-385 - László Sujbert, Gábor Péceli, Gyula Simon:
Resonator-based nonparametric identification of linear systems. 386-390 - Orsolya Takács, Annamária R. Várkonyi-Kóczy:
Iterative-type evaluation of PSGS fuzzy systems for anytime use. 391-397 - Yi-Hua Tang, Stuart L. Kupferman, Melquiades T. Salazar:
An evaluation of two methods for comparing Josephson voltage standards of two laboratories. 398-403 - Endre Toth, Ana Maria Ribeiro Franco, Rosane M. Debatin:
Power and energy reference system, applying dual-channel sampling. 404-408 - Stephen B. Vardeman, Chiang-Sheng Lee:
Likelihood-based statistical estimation from quantized data. 409-414 - Christian Vogel:
The impact of combined channel mismatch effects in time-interleaved ADCs. 415-427 - François Vogel, Bruno Toulouse:
A low-cost medium-resolution rangefinder based on the self-mixing effect in a VCSEL. 428-431 - Qingping Yang:
A novel representation of energy and signal transformation in measurement systems. 432-435 - Hubert Zangl, Bernhard Brandstätter, Stefan P. Cermak, Georg Brasseur, Paul L. Fulmek:
Simulation and robustness analysis for a novel capacitive/magnetic full-turn absolute angular position sensor. 436-441
Volume 54, Number 2, April 2005
- Gareth Jones:
Guest Editorial. 476-477 - Shaun Pollitt:
Foreword. 478 - Branislav V. Djokic, Eddy So:
Calibration system for electronic instrument transformers with digital output. 479-482 - Ilya F. Budovsky, Greg M. Hammond:
Precision measurement of power harmonics and flicker. 483-487 - Paul Clarkson, Paul S. Wright:
A wavelet-based method of measuring fluctuating harmonics for determining the filter time constant of IEC standard harmonic analyzers. 488-491 - Paul S. Wright:
Accurate analysis of smoothly modulated AC waveforms applied to the calibration of fluctuating harmonic analyzers. 492-495 - Gregory A. Kyriazis, Marcello L. R. de Campos:
An algorithm for accurately estimating the harmonic magnitudes and phase shifts of periodic signals with asynchronous sampling. 496-499 - Daniel Slomovitz, Heriguatí de Souza:
Shielded electronic current transformer. 500-502 - Réjean Arseneau, Eddy So, Ernst Hanique:
Measurements and correction of no-load losses of power transformers. 503-506 - Eddy So, Dave Angelo, Takuhiro Tsuchiyama, Takuya Tadokoro, Bryan C. Waltrip, Tom L. Nelson:
Intercomparison of calibration systems for AC shunts up to audio frequencies. 507-511 - Jürgen Schurr, Barry M. Wood, Frédéric Overney:
Linear frequency dependence in AC resistance measurement. 512-515 - Shakil A. Awan, Bryan P. Kibble:
Towards accurate measurement of the frequency dependence of capacitance and resistance standards up to 10 MHz. 516-520 - Günther Ramm, Harald Moser:
New multifrequency method for the determination of the dissipation factor of capacitors and of the time constant of resistors. 521-524 - Randolph E. Elmquist, Emmanouel Hourdakis, Dean G. Jarrett, Neil M. Zimmerman:
Direct resistance comparisons from the QHR to100 MΩ using a cryogenic current comparator. 525-528 - Luca Callegaro:
On strategies for automatic bridge balancing. 529-532 - François Delahaye, Roland Goebel:
Evaluation of the frequency dependence of the resistance and capacitance standards in the BIPM quadrature bridge. 533-537 - Rae Duk Lee, Han Jun Kim, Yu. P. Semenov:
Quasi-monolithic toroidal cross-capacitor. 538-541 - Yicheng Wang, Scott H. Shields:
Improved capacitance measurements with respect to a 1-pF cross-capacitor from 200 to 2000 Hz. 542-545 - Han Jun Kim, Rae Duk Lee, Yu. P. Semenov:
Compact inductance standard. 546-549 - Thomas J. Witt:
Allan variances and spectral densities for DC voltage measurements with polarity reversals. 550-553 - Helko E. van den Brom, Pieter de la Court, Gert Rietveld:
Accurate subpicoampere current source based on a differentiating capacitor with software-controlled nonlinearity compensation. 554-558 - Oliver Power, James E. Walsh:
In-service characterization of electronic voltage standards. 559-562 - Anu Kärkkäinen, Shakil A. Awan, Jukka Kyynäräinen, Panu Pekko, Aarne S. Oja, Heikki Seppä:
Optimized design and process for making a DC voltage reference based on MEMS. 563-566 - Thomas J. Witt, Yi-Hua Tang:
Investigations of noise in measurements of electronic voltage standards. 567-570 - Ling Xiang Liu, Sze Wey Chua, Chee Kiang Ang:
Determination of DC voltage ratio of a self-calibrating DC voltage divider. 571-575 - Giancarlo Marullo-Reedtz, Roberto Cerri, Wolfgang Waldmann, Jiri Streit, Pekka Immonen, Isabelle Blanc, Felix Raso, Torsten Funck, Bernd Schumacher, Erik F. Dierikx, Mário Nunes, Peter Vrabcek, Dusan Rudohradsky, Ove Gunnarsson, Karl-Erik Rydler, Blaise Jeanneret, Beat Jeckelmann, Thomas Pulfer, Saliha Selcik Turhan, Okan Yilmaz, Jonathan M. Williams, Harald Slinde, Kåre Lind, Jacques Nicolas, Matjaz Lindic, Eirini Flouda, Gábor Erdös:
Comparison EUROMET.EM-K8 of DC voltage ratio: results. 576-579 - Eddy So, Branislav V. Djokic:
A hybrid electronically coupled current comparator. 580-583 - Ling Hao, John C. Macfarlane, Simon Haining, John C. Gallop:
HTS superconducting current comparator: dynamic range and noise limits. 584-587 - Giorgio Boella, Iulian Mihai, Giancarlo Marullo-Reedtz, Pier Paolo Capra, Enrico Gasparotto:
The IEN CCC bridge to scale the quantized Hall resistance to 1-Ω standards. 588-591 - Shiyan Ren, Huayun Yang, Xiaowei Wang:
The theoretical analysis of open-loop characteristic for double magnetic detector comparator. 592-594 - Anu Kärkkäinen, Nadine Pesonen, Mika Suhonen, Aarne S. Oja, Antti Manninen, Nikolai Tisnek, Heikki Seppä:
MEMS-based AC voltage reference. 595-599 - Greig W. Small, Ilya F. Budovsky, A. Michael Gibbes, John R. Fiander:
Precision three-stage 1000 V/50 Hz inductive voltage divider. 600-603 - Branislav V. Djokic, Eddy So:
The development of a digital sampling system for low power factor measurements of high-voltage capacitive/inductive reactors. 604-607 - Yi Li, Jari K. Hällström, Wolfgang Lucas:
Comparison of two impulse calibrators with a high-resolution digitizer. 608-611 - Ralf Behr, Jonathan M. Williams, Pravin Patel, Theodoor J. B. M. Janssen, Torsten Funck, Manfred Klonz:
Synthesis of precision waveforms using a SINIS Josephson junction array. 612-615 - Yonuk Chong, Charles J. Burroughs Jr., Paul D. Dresselhaus, Nicolas Hadacek, Hirotake Yamamori, Samuel P. Benz:
2.6-V high-resolution programmable Josephson voltage standard circuits using double-stacked MoSi2-barrier junctions. 616-619 - Mayumi Ishizaki, Hirotake Yamamori, Akira Shoji, Paul D. Dresselhaus, Samuel P. Benz:
Programmable Josephson voltage standard circuits using arrays of NbN/TiN/NbN/TiN/NbN double-junction stacks operated at 10 K. 620-623 - Charles J. Burroughs Jr., Samuel P. Benz, Paul D. Dresselhaus, Yonuk Chong:
Precision measurements of AC Josephson voltage standard operating margins. 624-627 - Oleg A. Chevtchenko, Helko E. van den Brom, Ernest Houtzager, Ralf Behr, Johannes Kohlmann, Jonathan M. Williams, Theodoor J. B. M. Janssen, Luis Palafox, David A. Humphreys, François P. M. Piquemal, Sophie Djordjevic, O. Monnoye, André Poletaeff, Rado Lapuh, Karl-Erik Rydler, Gunnar Eklund:
Realization of a quantum standard for AC voltage: overview of a European research project. 628-631 - Juha Hassel, Panu Helistö, Leif Grönberg, Heikki Seppä, Jaani Nissilä, Antti Kemppinen:
Stimulated power generation in ES-SIS junction arrays. 632-635 - Jaani Nissilä, Antti Kemppinen, Kari Ojasalo, Juha Hassel, Antti Manninen, Panu Helistö, Heikki Seppä:
Realization of a square-wave voltage with externally-shunted SIS Josephson junction arrays for a quantum AC voltage standard. 636-640 - Kyu-Tae Kim, Mun-Seog Kim, Myungsoo Kim, Jürgen Niemeyer:
Josephson voltage standard as a current reference and practical method for stabilization of high current. 641-644 - Chiharu Urano, Yasushi Murayama, Akio Iwasa, Akira Shoji, Hirotake Yamamori, Mayumi Ishizaki:
A precise evaluation of NbN-based 1-V programmable Josephson voltage standard arrays. 645-648 - Waldemar G. Kürten, Enrico Mohns, Ralf Behr, Jonathan M. Williams, Pravin Patel, Günther Ramm, Hans Bachmair:
Characterization of a high-resolution analog-to-digital converter with a Josephson AC voltage source. 649-652 - Sae Woo Nam, Samuel P. Benz, Paul D. Dresselhaus, Charles J. Burroughs Jr., Wes Tew, Rod White, John M. Martinis:
Progress on Johnson noise thermometry using a quantum voltage noise source for calibration. 653-657 - Frédéric Overney, Blaise Jeanneret, Barry M. Wood, Jürgen Schurr:
Influence of the dissipation in AC measurements of the quantized Hall resistance. 658-661 - Brian W. Ricketts, John R. Fiander, H. Leigh Johnson:
Effects of guard surfaces on AC quantized Hall resistance steps. 662-665 - Hansjörg Scherer, Sergey V. Lotkhov, Gerd-Dietmar Willenberg, Alexander B. Zorin:
Steps toward a capacitance standard based on single-electron counting at PTB. 666-669 - Christian Hof, Blaise Jeanneret, Ali L. Eichenberger, Frédéric Overney, Mark W. Keller, M. J. Dalberth:
Manipulating single electrons with a seven-junction pump. 670-672 - Jeong-Hwan Kim, Hong-Ki Choi:
Antenna radiation pattern measurement at a reduced distance. 673-675 - Ulrich Stumper:
Uncertainty of VNA S-parameter measurement due to nonideal TRL calibration items. 676-679 - David A. Humphreys, James Miall:
Traceable RF peak power measurements for mobile communications. 680-683 - Luciano Brunetti, Emil T. Vremera:
New calibration method for coaxial microcalorimeters. 684-687 - Michiyuki Endo, Takeumi Inoue:
A double calorimeter for 10-W level laser power measurements. 688-691 - David C. Paulusse, Nelson L. Rowell, Alain Michaud:
Accuracy of an atomic microwave power standard. 692-695 - Wojciech Wiatr, David K. Walker:
Systematic errors of noise parameter determination caused by imperfect source impedance measurement. 696-700 - Jin-Seob Kang, Jeong-Hwan Kim, Dae-Chan Kim:
Phase analysis of coaxial short and open circuits. 701-704 - Joo-Gwang Lee, Jeong-Hwan Kim, Jeong-Il Park, Ung-Taeg Kang:
Uncertainty evaluation of a broadband attenuation standard. 705-708 - Thomas Musch, Michael Gerding, Burkhard Schiek:
A phase-locked-loop concept for the generation of two RF-signals with a small frequency offset. 709-712 - Kurt Weyand:
Compensation of the temperature coefficient of magnetic field coils. 713-717 - Gabriella Crotti, Domenico Giordano:
Evaluation of frequency behavior of coils for reference magnetic field generation. 718-721 - Oriano Bottauscio, Mario Chiampi, Gabriella Crotti, Mauro Zucca:
Probe influence on the measurement accuracy of nonuniform LF magnetic fields. 722-726 - Vladlen Ya. Shifrin, Vyacheslav N. Khorev, A. E. Shilov, Po Gyu Park:
A standard quantum measuring system for reproduction and measurement of low direct magnetic field in the range 0.1 μT-1.5 mT. 727-729 - Qing He, Zhengkun Li:
A novel apparatus for measuring permeability of weak magnetic materials. 730-733 - Po Gyu Park, Young Gyun Kim, V. Ya. Shifrin:
Maintenance of magnetic flux density standards on the basis of proton gyromagnetic ratio at KRISS. 734-737 - Emilia Alipieva, Sanka V. Gateva, Elena Taskova:
Potential of the single-frequency CPT resonances for magnetic field measurement. 738-741 - Pierre Gournay, Gérard Genevès, Francisco Alves, Mondher Besbes, François Villar, J. David:
Magnetic circuit design for the BNM Watt balance experiment. 742-745 - Long Sheng Ma, Zhiyi Bi, Albrecht Bartels, Lennart Robertsson, Massimo Zucco, Robert Windeler, Guido Wilpers, Chris Oates, Leo Hollberg, Scott A. Diddams:
International comparisons of femtosecond laser frequency combs. 746-749 - Harald Schnatz, Burghard Lipphardt, Carsten Degenhardt, Ekkehard Peik, Tobias Schneider, Uwe Sterr, Christian Tamm:
Optical frequency measurements using fs-comb generators. 750-753 - Frédéric du Burck, Christophe Daussy, Anne Amy-Klein, Andrei N. Goncharov, Olivier Lopez, Christian Chardonnet, Jean-Pierre Wallerand:
Frequency measurement of an Ar+ laser stabilized on narrow lines of molecular iodine at 501.7 nm. 754-758 - Kazumoto Hosaka, Stephen A. Webster, Peter J. Blythe, Adrian Stannard, David Beaton, Helen S. Margolis, Stephen N. Lea, Patrick Gill:
An optical frequency standard based on the electric octupole transition in 171Yb+. 759-762 - Hajime Inaba, Shinya Yanagimachi, Feng-Lei Hong, Atsushi Onae, Yasuki Koga, Hirokazu Matsumoto:
Stability degradation factors evaluated by phase noise measurement in an optical-microwave frequency link using an optical frequency comb. 763-766 - Hyeyoung Ahn, Ren-Huei Shu, Robert Windeler, Jin-Long Peng:
Building a frequency-stabilized mode-locked femtosecond laser for optical frequency metrology. 767-770 - Carsten Degenhardt, Tatiana Nazarova, Christian Lisdat, Hardo Stoehr, Uwe Sterr, Fritz Riehle:
Influence of chirped excitation pulses in an optical clock with ultracold calcium atoms. 771-775 - Thomas Zanon, Stéphane Tremine, Stéphane Guérandel, Emeric de Clercq, David Holleville, Noël Dimarcq, André Clairon:
Observation of Raman-Ramsey fringes with optical CPT pulses. 776-779 - Young Ho Park, Cha-Hwan Oh, Pill-Soo Kim, Taeg Yong Kwon, Sang Eon Park, Sang-Kyung Choi, Ho Seong Lee:
Cavity pulling shift evaluated from AC Zeeman shift in an optically-pumped cs beam standard. 780-782 - Jes Henningsen, Jan C. Petersen:
Molecular transitions as medium-precision wavelength standards for optical communication. 783-786 - Manfred Klonz, Günter Schliestedt, Torsten Funck, Milos Stojanovic, Borislav Stojanovic:
Millivolt calibrations using micropotentiometers with new disc resistors and planar MJTCS aided by new Millivolt amplifiers. 787-790 - Enrico Mohns, Waldemar G. Kürten Ihlenfeld:
Fast synchronous AC-DC-transfer with thermal converters. 791-794 - Ilya F. Budovsky, Abdul Rashid Bin Zainal Abidin, Aaron Y. K. Yan, LingXiang Liu, Vijay Kumar Rustagi, Anil Kumar Govil, Manfred Klonz, Yih-cheng Wei, Murray D. Early, Hitoshi Sasaki, Hiroyuki Fujiki, Chalit Kumtawee, Ajchara Charoensook, Sung-Won Kwon, Nguyen Ahn Son, Bambang Suprianto, Moses Temba, Manuel Ruiz, Sabino Paulo B. Leones Jr.:
APMP international comparison of AC-DC transfer standards at the lowest attainable level of uncertainty. 795-798 - Luciana Scarioni, Manfred Klonz, Torsten Funck:
Quartz planar multijunction thermal converter as a new AC-DC current transfer standard up to 1 MHz. 799-802 - Héctor Laiz, Thomas F. Wunsch, Joseph R. Kinard, Thomas E. Lipe:
1-A and-120 mA thin-film multijunction thermal converters. 803-806 - Torsten Funck, Marian Kampik, Ernst Kessler, Manfred Klonz, Héctor Laiz, Rado Lapuh:
Determination of the AC-DC voltage transfer difference of high-voltage transfer standards at low frequencies. 807-809 - Umberto Pogliano, Gian Carlo Bosco:
Investigations on the electrometric AC-DC transfer standard. 810-813 - Philippe Merck, Joseph Achkar:
Design of a ku band delay difference calibration device for TWSTFT station. 814-818 - Chia-Lung Cheng, Fan-Ren Chang, Kun-Yuan Tu:
Highly accurate real-time GPS carrier phase-disciplined oscillator. 819-824 - Hsin-Min Peng, Chia-Shu Liao, Jeng-Kuang Hwang:
Performance testing of time comparison using GPS-smoothed P3 code and IGS ephemerides. 825-828 - Fumimaru Nakagawa, Michito Imae, Yuko Hanado, Masanori Aida:
Development of multichannel dual-mixer time difference system to generate UTC (NICT). 829-832 - Celine Vian, Peter Rosenbusch, Harold Marion, Sebastien Bize, Luigi Cacciapuoti, Shougang Zhang, Michel Abgrall, Damien Chambon, I. Maksimovic, Philippe Laurent, Giorgio Santarelli, André Clairon, Andre Nicholas Luiten, Michael E. Tobar, Christophe Salomon:
BNM-SYRTE fountains: recent results. 833-836 - Witold Chalupczak, Krzysztof Szymaniec, Dale Henderson:
Cooling in an optical lattice for a caesium fountain frequency standard. 837-841 - Thomas P. Heavner, Steven R. Jefferts, Elizabeth A. Donley, Jon H. Shirley, Thomas E. Parker:
Recent improvements in NIST-F1 and a resulting accuracy of δf/f=0.61×10-15. 842-845 - Richard L. Steiner, David B. Newell, Edwin R. Williams, Ruimin Liu, Pierre Gournay:
The NIST project for the electronic realization of the kilogram. 846-849 - Gérard Genevès, Pierre Gournay, A. Gosset, M. Lecollinet, François Villar, Patrick Pinot, Patrick Juncar, André Clairon, Arnaud Landragin, David Holleville, Franck Pereira Dos Santos, J. David, Mondher Besbes, Francisco Alves, Luc Chassagne, Suat Topçu:
The BNM Watt balance project. 850-853 - Kenichi Fujii, Atsushi Waseda, Naoki Kuramoto, Shigeki Mizushima, Peter Becker, Horst Bettin, R. Arnold Nicolaus, Ulrich Kuetgens, Staf Valkiers, Philip Taylor, Paul De Bievre, Giovanni Mana, Enrico Massa, Richard Matyi, Ernest Kessler, Michael Hanke:
Present State of the avogadro constant determination from silicon Crystals with natural isotopic compositions. 854-859 - Christian Schlegel, Dirk Ratschko, Frank Scholz, Michael Gläser:
Using an intense bismuth ion beam for the accumulation of a weighable mass of atoms. 860-863 - Makoto Yasuhara, Takatoshi Aoki, Hirotaka Narui, Atsuo Morinaga:
Measurement of Berry's phase for partial cycles using a time-domain atomic Interferometer. 864-867 - Naoki Kuramoto, Kenichi Fujii:
Volume determination of a silicon sphere using an improved interferometer with optical frequency tuning. 868-871 - R. Arnold Nicolaus, Clemens Elster:
Diameter determination of Avogadro Spheres #1 and #2. 872-876 - Horst Bettin, Hans Toth, Atsushi Waseda, Kenichi Fujii:
Comparison of density difference measurements at PTB and NMIJ. 877-881 - Atsushi Waseda, Kenichi Fujii, Naoyuki Taketoshi:
Density measurement of a thin-film by the pressure-of-flotation method. 882-885 - Ling Hao, John C. Gallop, John C. Macfarlane:
Coupled microwave resonators for sensitive bolometric detection. 886-889 - Stefania Castelletto, Ivo Pietro Degiovanni, Giampiero Furno, Valentina Schettini, Alan Migdall, Michael Ware:
Two-photon mode preparation and matching efficiency: definition, measurement, and optimization. 890-893 - David A. Humphreys, Matthew R. Harper, Andrew J. A. Smith, Ian M. Smith:
Vector calibration of optical reference receivers using a frequency-domain method. 894-897 - Giorgio Brida, Maria Chekhova, Marco Genovese, Marco Gramegna, Leonid Krivitsky, Maria Luisa Rastello:
Absolute quantum efficiency measurements by means of conditioned polarization rotation. 898-900
Volume 54, Number 3, June 2005
- Robert W. Gao:
Guest Editorial Special Section on Built-In-Test. 939-940 - Sunil R. Das:
Getting errors to catch themselves - self-testing of VLSI circuits with built-in hardware. 941-955 - Douglas Kay, Sung Chung, Samiha Mourad:
Embedded test control schemes using iBIST for SOCs. 956-964 - Jacob Savir:
Built-in online and offline test of airborne digital systems. 965-974 - Karen Taylor, Bryan Nelson, Alan Chong, Henry C. Lin, Eddie Chan, Mani Soma, Hosam Haggag, Jeff Huard, Jim Braatz:
Special issue on BIT CMOS built-in test architecture for high-speed jitter measurement. 975-987 - An Sang Hou:
A built-in-test scheme for evaluating the parameters of floating-gate MOS transistors. 988-995 - Chun-Lung Hsu, Yi-Ting Lai, Shu-Wei Wang:
Built-in self-test for phase-locked loops. 996-1002 - John W. Sheppard, Mark A. Kaufman:
A Bayesian approach to diagnosis and prognosis using built-in test. 1003-1018 - Adam Josko, Remigiusz J. Rak:
Effective simulation of signals for testing ECG analyzer. 1019-1024 - Massimo Aiello, Antonio Cataliotti, Salvatore Nuccio:
A chirp-z transform-based synchronizer for power system measurements. 1025-1032 - Cesare Alippi, Marcantonio Catelani, Ada Fort, Marco Mugnaini:
Automated selection of test frequencies for fault diagnosis in analog electronic circuits. 1033-1044 - Bruno Andò, Salvatore Graziani, Nicola Pitrone:
Characterization of threshold-induced phenomena in deterministic driven devices. 1045-1053 - Bruno Andò, Salvatore Graziani:
Basic measurements for the characterization of ferroelectric devices. 1054-1060 - Gregorio Andria, Giuseppe Cavone, Vincenzo Di Lecce, Anna Maria Lucia Lanzolla:
Model characterization in measurements of environmental pollutants via data correlation of sensor outputs. 1061-1066 - Gui-Qiu Bao, Shen-Shu Xiong, Zhao-Ying Zhou:
Vision-based horizon extraction for micro air vehicle flight control. 1067-1072 - Harrish Chandr Bheemul, Gang Lu, Yong Yan:
Digital imaging-based three-dimensional characterization of flame front structures in a turbulent flame. 1073-1078 - Stephen Bull, Alexander V. Andrianov, Ian Harrison, Michael Dorin, Robert B. Kerr, John Noto, Eric C. Larkins:
A spectroscopically resolved photo- and electroluminescence microscopy technique for the study of high-power and high-brightness laser diodes. 1079-1088 - Chien-In Henry Chen, Kiran George, William McCormick, James B. Y. Tsui, Stephen L. Hary, Keith M. Graves:
Design and performance evaluation of a 2.5-GSPS digital receiver. 1089-1099 - Zhi Ning Chen, Ning Yang, Yong-Xin Guo, Michael Yan Wah Chia:
An investigation into measurement of handset antennas. 1100-1110 - Marco Chirico, Anna Marina Scapolla, Andrea Bagnasco:
A new and open model to share laboratories on the Internet. 1111-1117 - Fjo De Ridder, Rik Pintelon, Johan Schoukens, Anouk Verheyden:
Reduction of the Gibbs phenomenon applied on nonharmonic time base distortions. 1118-1125 - Mark R. DiSilvestro, Stephen W. Swope, Terry L. Dietz, Donald E. McNulty:
The design and development of a measurement system for the investigation of dynamic micromotion in total knee joint replacements. 1126-1132 - Tibor Fabian, Fritz B. Prinz, Georg Brasseur:
Capacitive sensor for active tip clearance control in a palm-sized gas turbine generator. 1133-1143 - George C. Giakos, N. Shah, Samir Chowdhury, Sankararaman Suryanarayanan, S. Sumrain, R. Guntupalli, A. Medithe, Srinivasan Vedantham, V. Kumar, Robert J. Endorf:
An efficient, novel microstrip collector architecture for digital radiographic imaging CZT semiconductor sensors. 1144-1149 - Vladimír Haasz, Jaroslav Roztocil, David Slepicka:
Evaluation of ADC testing systems using ADC transfer standard. 1150-1155 - Wei-Da Hao, Yih-Chyun Jenq, Shiang-Yu Wang:
Ratio indicator characterization for measuring the precision of an estimate obtained by processing sampled data. 1156-1165 - Chang-Hwan Im, Hyun-Kyo Jung:
Numerical emulator for walk-through metal detectors using 3-D indirect boundary integral equation method. 1166-1170 - Boguslaw J. Jarosz, Sara St James:
Integrated temperature sensor for determination of ultrasound interstitial applicator heating effects. 1171-1174 - Rainer Jaskulke, Bernhard Himmel:
Event-controlled sampling system for marine research. 1175-1179 - Yih-Chyun Jenq, Lerong Cheng:
Digital spectrum of a nonuniformly sampled two-dimensional signal and its reconstruction. 1180-1187 - Le Jin, Kumar L. Parthasarathy, Turker Kuyel, Degang Chen, Randall L. Geiger:
Accurate testing of analog-to-digital converters using low linearity signals with stimulus error identification and removal. 1188-1199 - Amor Jnifene, William Andrews:
Experimental study on active vibration control of a single-link flexible manipulator using tools of fuzzy logic and neural networks. 1200-1208 - Harald Klingbeil:
A fast DSP-based phase-detector for closed-loop RF control in synchrotrons. 1209-1213 - Christian Lauer, Stefan Szalay, Gerhard Böhm, Chun Lin, Fabian Köhler, Markus-Christian Amann:
Laser hygrometer using a vertical-cavity surface-emitting laser (VCSEL) with an emission wavelength of 1.84 μm. 1214-1218 - Stanko Milun, Tomislav Kilic, Ozren Bego:
Measurement of soil thermal properties by spherical probe. 1219-1226 - Andrea Murari, Luca Lotto, S. Costa, I. Molon:
In situ measurement of "Open Window" electron multipliers' gain. 1227-1234 - Tomas Olofsson:
Deconvolution and model-based restoration of clipped ultrasonic signals. 1235-1240 - Noh-Jin Park, K. M. George, Nohpill Park, Minsu Choi, Yong-Bin Kim, Fabrizio Lombardi:
Environmental-based characterization of SoC-based instrumentation systems for stratified testing. 1241-1248 - Henrique Jorge Quaresma, Antonio Pedro Silva, Antonio M. Cruz Serra:
Error correction technique for dynamic impedance measurement. 1249-1253 - Fernando Rangel de Sousa, Bernard Huyart, Sebastian Yuri Cavalcanti Catunda:
A-to-D converter and lookup table dimensioning for six- or five-port phase discriminators. 1254-1259 - Luís Alexandre Rocha, Edmond Cretu, Reinoud F. Wolffenbuttel:
MEMS-based mechanical spectrum analyzer. 1260-1265 - Florence Sagnard, Faroudja Bentabet, Christophe Vignat:
In situ measurements of the complex permittivity of materials using reflection ellipsometry in the microwave band: theory (part I). 1266-1273 - Florence Sagnard, Faroudja Bentabet, Christophe Vignat:
In situ measurements of the complex permittivity of materials using reflection ellipsometry in the microwave band: experiments (Part II). 1274-1282 - Mehmet Sahinoglu, David L. Libby, Sunil R. Das:
Measuring availability indexes with small samples for component and network reliability using the Sahinoglu-Libby probability model. 1283-1295 - Edval J. P. Santos, Anatoly A. Barybin:
Stepped-waveform synthesis for reducing third harmonic content. 1296-1302 - Roar Skartlien, Leiv Øyehaug:
Quantization error and resolution in ensemble averaged data with noise. 1303-1312 - Michael Solomou, David Rees:
Frequency domain analysis of nonlinear distortions on linear frequency response function measurements. 1313-1320 - Yanfeng Wang, Makoto Nishikawa, Ryuichi Maeda, Masaichi Fukunaga, Kenzo Watanabe:
A smart thermal environment monitor based on IEEE 1451.2 standard for global networking. 1321-1326 - Mark H. Weatherspoon, Lawrence P. Dunleavy:
Vector corrected on-wafer measurements of noise temperature. 1327-1332 - Xiaoli Yang, Dorina C. Petriu, Thomas E. Whalen, Emil M. Petriu:
Hierarchical animation control of avatars in 3-D virtual environments. 1333-1341
Volume 54, Number 4, August 2005
- Roberto Ottoboni, Serge N. Demidenko:
Guest Editorial Special Issue on IMTC'04. 1346 - Dusan Agrez:
Improving phase estimation with leakage minimization. 1347-1353 - Abdullah Al Mamun, Guoxiao Guo, Kay Chen Tan, Yimei Liu:
Digital processing of dual-frequency servo burst in hard disk drives. 1354-1360 - Davorin Ambrus, Vedran Bilas, Darko Vasic:
A digital tachometer for high-temperature telemetry utilizing thermally uprated commercial electronic components. 1361-1365 - Bruno Andò, Salvatore Baglio, Vincenzo Sacco, Adi R. Bulsara:
Effects of driving mode and optimal material selection on a residence times difference-based fluxgate magnetometer. 1366-1373 - Leopoldo Angrisani, Mauro D'Arco, Rosario Schiano Lo Moriello, Michele Vadursi:
On the use of the warblet transform for instantaneous frequency estimation. 1374-1380 - Leopoldo Angrisani, Mauro D'Arco, Michele Vadursi:
Error vector-based measurement method for radiofrequency digital transmitter troubleshooting. 1381-1387 - Eulalia Balestrieri, Pasquale Daponte, Sergio Rapuano:
A state of the art on ADC error compensation methods. 1388-1394 - Fragiskos A. Batzias, Christina G. Siontorou:
Investigating the causes of biosensor SNR decrease by means of fault tree analysis. 1395-1406 - Elio Bava, Niccolò Beverini, Giorgio Carelli, Andrea De Michele, Gianluca Galzerano, Enrico Maccioni, Augusto Moretti, Marco Prevedelli, Fiodor Sorrentino, Cesare Svelto:
Measurements of near-infrared frequency mixing by metal-semiconductor point-contact diodes. 1407-1411 - Piotr Bilski, Wieslaw Winiecki:
Time optimization of soft real-time virtual instrument design. 1412-1416 - Phillip M. Brisley, Gang Lu, Yong Yan, Steve Cornwell:
Three-dimensional temperature measurement of combustion flames using a single monochromatic CCD camera. 1417-1421 - Alicia Calderon, Amparo L. Virto, Jose Miguel Luque Raigon:
First results on the characterization of new semitransparent amorphous silicon sensors. 1422-1426 - Carlo F. M. Carobbi, Simone Lazzerini, Luigi M. Millanta:
High-frequency operation of the coils for standard magnetic-field generation using the bulk-current technique. 1427-1432 - Robert M. Carter, Yong Yan:
An instrumentation system using combined sensing strategies for online mass flow rate measurement and particle sizing. 1433-1437 - Éric Colinet, Jérôme Juillard, Liviu Nicu, Christian Bergaud:
Digital self-calibration method for MEMS sensors. 1438-1443 - Luca De Vito, Sergio Rapuano, Gioacchino Truglia:
A 3-D baseband signal analyzer prototype for 3G mobile telecommunication systems. 1444-1451 - Tom D'haene, Rik Pintelon, Johan Schoukens, Els Van Gheem:
Variance analysis of frequency response function measurements using periodic excitations. 1452-1456 - Alexander E. Emanuel:
Poynting vector and the physical meaning of nonactive powers. 1457-1462 - Stefano Ferrari, Iuri Frosio, Vincenzo Piuri, N. Alberto Borghese:
Automatic multiscale meshing through HRBF networks. 1463-1470 - Alessandro Ferrero, Simona Salicone:
An easy VI program to detect transient disturbances in the supply voltage. 1471-1474 - Alessandro Ferrero, Simona Salicone:
A comparative analysis of the statistical and random-fuzzy approaches in the expression of uncertainty in measurement. 1475-1481 - Alessandro Ferrero, Simona Salicone:
The use of random-fuzzy variables for the implementation of decision rules in the presence of measurement uncertainty. 1482-1488 - Marco Gamassi, Massimo Lazzaroni, Mauro Misino, Vincenzo Piuri, Daniele Sana, Fabio Scotti:
Quality assessment of biometric systems: a comprehensive perspective based on accuracy and performance measurement. 1489-1496 - Mohammad Tayeb Ahmad Ghasr, Sergey Kharkovsky, Reza Zoughi, Russell Austin:
Comparison of near-field millimeter-wave probes for detecting corrosion precursor pitting under paint. 1497-1504 - Luis Hervás:
The ATLAS liquid argon electromagnetic calorimeter: construction, commissioning and selected test beam results. 1505-1512 - Christian M. Kargel:
Infrared thermal imaging to measure local temperature rises caused by handheld mobile phones. 1513-1519 - Donald R. Larson, Nicholas G. Paulter Jr., David I. Bergman:
Pulse parameter dependence on transition occurrence instant and waveform epoch. 1520-1526 - Kang B. Lee, Eugene Y. Song:
Object-oriented application framework for IEEE 1451.1 standard. 1527-1533 - Santiago Lizón-Martínez, Romano Giannetti, José Luis Rodríguez-Marrero, Bernardo Tellini:
Design of a system for continuous intraocular pressure monitoring. 1534-1540 - David Lo, Rafik A. Goubran, Richard M. Dansereau:
Robust joint audio-video talker localization in video conferencing using reliability information-II: Bayesian network fusion. 1541-1547 - Daniel Mitrani, José Antonio Tomé, Jordi Salazar, Antoni Turó, Miguel Jesus García, Juan Antonio Chávez:
Methodology for extracting thermoelectric module parameters. 1548-1552 - Claudio Narduzzi:
Inverse filtering with signal-adaptive constraints. 1553-1559 - Pawel Niewczas, Lukasz Dziuda, Grzegorz Fusiek, James R. McDonald:
Design and evaluation of a preprototype hybrid fiber-optic voltage sensor for a remotely interrogated condition monitoring system. 1560-1564 - Emilia Nunzi, Gianna Panfilo, Patrizia Tavella, Paolo Carbone, Dario Petri:
Stochastic and reactive methods for the determination of optimal calibration intervals. 1565-1569 - Jan Obrzut, Kenji Kano:
Impedance and nonlinear dielectric testing at high AC voltages using waveforms. 1570-1574 - Gaetano Pasini, Pier Andrea Traverso, Domenico Mirri, Gaetano Iuculano, Fabio Filicori:
Hardware implementation of a broad-band vector spectrum analyzer based on randomized sampling. 1575-1582 - Pierre Payeur, Codrin Pasca, Ana-Maria Cretu, Emil M. Petriu:
Intelligent haptic sensor system for robotic manipulation. 1583-1592 - Lorenzo Peretto, Renato Sasdelli, Roberto Tinarelli:
On uncertainty in wavelet-based signal analysis. 1593-1599 - Fabrizio Russo:
Automatic enhancement of noisy images using objective evaluation of image quality. 1600-1606 - Edgar Scherleitner, Bernhard G. Zagar:
Optical tomography imaging based on higher order Born approximation of diffuse photon density waves. 1607-1611 - John L. Schmalzel, Fernando Figueroa, Jon Morris, Shreekanth Mandayam, Robi Polikar:
An architecture for intelligent systems based on smart sensors. 1612-1616 - António Manuel da Cruz Serra, Manuel Fonseca da Silva, Pedro M. Ramos, Raul Carneiro Martins, Linus Michaeli, Ján Saliga:
Combined spectral and histogram analysis for fast ADC testing. 1617-1623 - Fabrizio Stefani, Antonio Moschitta, Paolo Carbone:
CDMA system sensitivity to ΣΔ A/D conversion. 1624-1629 - Cesare Svelto, Michele Norgia, Elio Bava, Gianluca Galzerano:
FM spectroscopy of monodeuterated methane as a frequency standard at 1.54 μm. 1630-1633 - Yanfeng Wang, Masakatsu Nakayama, Mikiko Yagi, Makoto Nishikawa, Masaichi Fukunaga, Kenzo Watanabe:
The NDIR CO2 monitor with smart interface for global networking. 1634-1639 - Lijun Xu, Yong Yan, Steve Cornwell, Gerry Riley:
Online fuel tracking by combining principal component analysis and neural network techniques. 1640-1645 - Hashem Zare-Hoseini, Izzet Kale, Omid Shoaei:
Modeling of switched-capacitor delta-sigma Modulators in SIMULINK. 1646-1654
Volume 54, Number 5, October 2005
- Sunil R. Das, Rochit Rajsuman:
Guest Editorial First Special Section of the IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT in the Area of VLSI Testing - Future of Semiconductor Test. 1659-1661 - Sunil R. Das, Chittoor V. Ramamoorthy, Mansour H. Assaf, Emil M. Petriu, Wen-Ben Jone, Mehmet Sahinoglu:
Revisiting response compaction in space for full-scan circuits with nonexhaustive test sets using concept of sequence characterization. 1662-1677 - Rochit Rajsuman, Masuda Noriyuki, Kazuhiro Yamashita:
Architecture and design of an open ATE to incubate the development of third-party instruments. 1678-1698 - Katsuhito Nagano:
CAD navigation and diagnostics by linking ATE and EDA. 1699-1707 - Qizhang Yin, William R. Eisenstadt, Robert M. Fox, Tao Zhang:
A translinear RMS detector for embedded test of RF ICs. 1708-1714 - Jangsup Yoon, William R. Eisenstadt:
Embedded loopback test for RF ICs. 1715-1720 - Vinod Narayanan, Swaroop Ghosh, Wen-Ben Jone, Sunil R. Das:
A built-in self-testing method for embedded multiport memory arrays. 1721-1738 - Xingguo Xiong, Yu-Liang Wu, Wen-Ben Jone:
A dual-mode built-in self-test technique for capacitive MEMS devices. 1739-1750 - Amit Laknaur, Haibo Wang:
A methodology to perform online self-testing for field-programmable analog array circuits. 1751-1760 - Hamidreza Hashempour, Luca Schiano, Fabrizio Lombardi:
Evaluation, analysis, and enhancement of error resilience for reliable compression of VLSI test data. 1761-1769 - Hamidreza Hashempour, Fred J. Meyer, Fabrizio Lombardi:
Analysis and evaluation of multisite testing for VLSI. 1770-1778 - José Manuel Cazeaux, Martin Omaña, Cecilia Metra:
Novel on-chip circuit for jitter testing in high-speed PLLs. 1779-1788 - Mehmet Sahinoglu, Chittoor V. Ramamoorthy:
RBD tools using compression, decompression, hybrid techniques to code, decode, and compute reliability in simple and complex embedded systems. 1789-1799 - Andy Kuo, Roberto Rosales, Touraj Farahmand, Sassan Tabatabaei, André Ivanov:
Crosstalk bounded uncorrelated jitter (BUJ) for high-speed interconnects. 1800-1810 - Massimo Aiello, Antonio Cataliotti, Salvatore Nuccio:
An induction motor speed measurement method based on current harmonic analysis with the chirp-Z transform. 1811-1819 - Daniel N. Aloi, Andrew Rusek, Barbara A. Oakley:
A relative technique for characterization of PCV error of large aperture antennas using GPS data. 1820-1832 - Tomas Andersson, Peter Händel:
Multiple-tone estimation by IEEE standard 1057 and the expectation-maximization algorithm. 1833-1839 - Bruno Andò:
Thermal measurements on cooling lava. 1840-1845 - Abdullah Bal, Mohammad S. Alam:
Automatic target tracking in FLIR image sequences using intensity variation function and template modeling. 1846-1852 - Satyendra Biswas, Sunil R. Das, Emil M. Petriu:
An adaptive compressed MPEG-2 video watermarking scheme. 1853-1861 - Piet M. T. Broersen, Stijn de Waele:
Automatic identification of time-series models from long autoregressive models. 1862-1868 - Luca Callegaro, Vincenzo D'Elia, Danilo Serazio:
10-nF capacitance transfer standard. 1869-1872 - James C. Camparo, Charles M. Klimcak, S. J. Herbulock:
Frequency equilibration in the vapor-cell atomic clock. 1873-1880 - Luca Dalessandro, Daniele Rosato:
Finite-element analysis of the frequency response of a metallic cantilever coupled with piezoelectric transducer. 1881-1890 - Frank De Bisschop, Sunny Eloot, Pascal R. Verdonck, J. L. Everaert, Marc De Mets:
Instrumental method for quantitative evaluation of cell or particle adhesion, based on transport measurements in capillary flow. 1891-1897 - Hai Ding, I. Charles Ume, Jian Zhang, Daniel F. Baldwin:
Integrated hardware and software for improved flatness measurement with ATC4.1 flip-chip assembly case study. 1898-1904 - Elizabeth A. Donley, Thomas P. Heavner, Steven R. Jefferts:
Optical molasses loaded from a low-velocity intense source of atoms: an atom source for improved atomic fountains. 1905-1910 - Nadezda Dragounova:
Precision high-voltage dc dividers and their calibration. 1911-1915 - Sergey N. Dudorov, Dmitri V. Lioubtchenko, Juha A. Mallat, Antti V. Räisänen:
Differential open resonator method for permittivity measurements of thin dielectric film on substrate. 1916-1920 - Fabio Filicori, Paola Rinaldi, Giorgio Vannini, Alberto Santarelli:
A new technique for thermal resistance measurement in power electron devices. 1921-1925 - Kim R. Fowler:
Transient response for automatic gain control with multiple intensity thresholds for image-intensified camera. 1926-1933 - Manel Gasulla, Xiujun Li, Gerard C. M. Meijer:
The noise performance of a high-speed capacitive-sensor interface based on a relaxation oscillator and a fast counter. 1934-1940 - Yehya H. Ghallab, Wael M. Badawy, Karan V. I. S. Kaler, Brent Maundy:
A novel current-mode instrumentation amplifier based on operational floating current conveyor. 1941-1949 - George C. Giakos, N. Patnekar, S. Sumrain, Luay Fraiwan, V. Kumar:
A novel multipath light signal dispersion reduction technique based on controlled-polarization optical wireless link setup. 1950-1956 - Nikica Hlupic, Josip Butorac, Mario Kresic:
Improved frequency measurement by means of DMM and verification of its specifications. 1957-1963 - Waldemar G. Kürten Ihlenfeld:
A simple, reliable, and highly stable AC voltage amplifier for calibration purposes. 1964-1967 - Valérie Kaftandjian, Yue Min Zhu, Olivier Dupuis, Daniel Babot:
The combined use of the evidence theory and fuzzy logic for improving multimodal nondestructive testing systems. 1968-1977 - István Kollár, Jerome J. Blair:
Improved determination of the best fitting sine wave in ADC testing. 1978-1983 - Hayriye Korkmaz, Burhanettin Can:
A thermal expansion measurement system using a high-temperature unguided half-bridge displacement transducer. 1984-1988 - Tommi A. Laitinen, Pertti Vainikainen, Tomi Koskinen, Outi Kivekäs:
Amplitude-only and complex field measurements for characterizing radiated fields of mobile terminal antennas from a small number of samples. 1989-1996 - Adrian G. Ledroz, Efraim Pecht, David Cramer, Martin P. Mintchev:
FOG-based navigation in downhole environment during horizontal drilling utilizing a complete inertial measurement unit: directional measurement-while-drilling surveying. 1997-2006 - Jianjun Ma, Wojtek J. Bock:
White-light fringe restoration and high-precision central fringe tracking using frequency filters and Fourier-transform pair. 2007-2012 - Zdenek Matyas, Martti Aro:
HV impulse measuring systems analysis and qualification by estimation of measurement errors via FFT, convolution, and IFFT. 2013-2019 - Christian P. Morath, Kenneth Vaccaro, Walter Buchwald, William R. Clark:
Comparator-based measurement scheme for dark-count rates in single photon avalanche diodes. 2020-2026 - Roman Z. Morawski, Andrzej Miekina, Andrzej Barwicz:
Curve-fitting algorithms versus neural networks when applied for estimation of wavelength and power in DWDM systems. 2027-2032 - Stuart O. Nelson:
Density-permittivity relationships for powdered and granular materials. 2033-2040 - Seppo J. Ovaska, Tamal Bose, Olli Vainio:
Genetic algorithm-assisted design of adaptive predictive filters for 50/60 Hz power systems instrumentation. 2041-2048 - Shanup Peer, Kimberly E. Kurtis, Reza Zoughi:
Evaluation of microwave reflection properties of cyclically soaked mortar based on a semiempirical electromagnetic model. 2049-2060 - Rik Pintelon, Johan Schoukens, Laurence Pauwels, Els Van Gheem:
Diffusion systems: stability, modeling, and identification. 2061-2067 - Sergio Rapuano, Gioacchino Truglia:
An improved image processing-based method for disturbance classification in telecommunication networks. 2068-2074 - Luigi Rovati, Matteo Bonaiuti, Paolo Pavan:
Design of a high-performance optical system for angular position measurement: optical and electronic strategies for uncertainty reduction. 2075-2081 - Selahattin Sayil, David V. Kerns Jr., Sherra E. Kerns:
Comparison of contactless measurement and testing techniques to a all-silicon optical test and characterization method. 2082-2089 - Wei-Qun Shu:
Dynamical modeling of turbine flow meters. 2090-2092 - Carmen-Gabriela Stefanita, Yun Feng Shao, Wojciech Rozmus, Clarence E. Capjack, Christopher J. Backhouse:
Filtering scattered light in microchip-based cell diagnostics. 2093-2098 - Eng Chong Tan, Abdul Wahab, Kay Min Low:
Application of capacitive coupling to the design of an absolute-coordinate pointing device. 2099-2104 - Gabriella Tognola, Sandro Burdo, Mara Caponio, Michele Norgia, Marta Parazzini, Paolo Ravazzani, Ferdinando Grandori, Cesare Svelto:
Measurement of electrode current pulses from cochlear implants. 2105-2112 - Josep Maria Torrents, Ramon Pallàs-Areny:
Error analysis in two-terminal impedance measurements with residual correction. 2113-2116 - Stephen B. Vardeman:
Sheppard's correction for variances and the "quantization noise model". 2117-2119 - Anjali Verma, Dinesh C. Dube:
Measurement of dielectric parameters of small samples at X-band frequencies by cavity perturbation technique. 2120-2123 - Fabio E. Zocchi:
Estimation of the accuracy of a reflector surface from the measured rms error. 2124-2129
Volume 54, Number 6, December 2005
- Annamária R. Várkonyi-Kóczy:
Guest Editorial Special Section on Intelligent Signal Processing. 2147-2148 - Marek R. Ogiela, Ryszard Tadeusiewicz:
Nonlinear processing and semantic content analysis in medical imaging-a cognitive approach. 2149-2155 - Ljubisa Stankovic, Slobodan Djukanovic:
Order adaptive local polynomial FT based interference rejection in spread spectrum communication systems. 2156-2162 - Salim Graja, Jean-Marc Boucher:
Hidden Markov tree model applied to ECG delineation. 2163-2168 - József K. Tar, Imre J. Rudas, Ágnes Szeghegyi, Krzysztof Kozlowski:
Nonconventional processing of noisy signals in the adaptive control of hydraulic differential servo cylinders. 2169-2176 - Alexander N. Kalashnikov, Richard E. Challis, Marion E. Unwin, Andrew K. Holmes:
Effects of frame jitter in data acquisition systems. 2177-2183 - Grigorios N. Beligiannis, Lambros V. Skarlas, Spiridon D. Likothanassis, Katerina G. Perdikouri:
Nonlinear model structure identification of complex biomedical data using a genetic-programming-based technique. 2184-2190 - Péter Baranyi, Annamária R. Várkonyi-Kóczy:
TP transformation based dynamic system modeling for nonlinear control. 2191-2203 - Nikolaos Papandreou, Theodore Antonakopoulos:
Far-end crosstalk identification method based on channel training sequences. 2204-2212 - Junta Doi, Masaaki Yamanaka:
Discrete finger and palmar feature extraction for personal authentication. 2213-2219 - Maria Margarida Madeira E. Moura, Ana Leiria, M. Graça Ruano:
Adaptive system for blood flow estimation. 2220-2226 - Péter Berényi, Gábor Horváth, Vincent Lampaert, Jan Swevers:
Nonlocal hysteresis function identification and compensation with neural networks. 2227-2238 - Jerónimo Arenas-García, Vanessa Gómez-Verdejo, Aníbal R. Figueiras-Vidal:
New algorithms for improved adaptive convex combination of LMS transversal filters. 2239-2249 - Peter Tamas Szemes, Hideki Hashimoto, Péter Korondi:
Pedestrian-behavior-based mobile agent control in intelligent space. 2250-2257 - T. K. Abdel-Galil, R. M. Sharkawy, Magdy M. A. Salama, R. Bartnikas:
Partial discharge pattern classification using the fuzzy decision tree approach. 2258-2263 - Massimo Aiello, Antonio Cataliotti, Salvatore Nuccio:
A comparison of spectrum estimation techniques for nonstationary signals in induction motor drive measurements. 2264-2271 - Leopoldo Angrisani:
A wavelet packet transform-based approach for interference measurement in spread spectrum wireless communication systems. 2272-2280 - Ying Bai, Hanqi Zhuang:
On the comparison of bilinear, cubic spline, and fuzzy interpolation techniques for robotic position measurements. 2281-2288 - Mohieddine Benammar, Lazhar Ben-Brahim, Mohd A. Alhamadi:
A high precision resolver-to-DC converter. 2289-2296 - Minsu Choi, Nohpill Park, Vincenzo Piuri, Fabrizio Lombardi:
Reliability measurement of mass storage system for onboard instrumentation. 2297-2304 - Francisco André Corrêa Alegria, António Manuel da Cruz Serra:
Overdrive in the ramp histogram test of ADCs. 2305-2309 - Sunil R. Das, Chittoor V. Ramamoorthy, Mansour H. Assaf, Emil M. Petriu, Wen-Ben Jone, Mehmet Sahinoglu:
Fault simulation and response compaction in full scan circuits using HOPE. 2310-2328 - Luis Norberto López de Lacalle, Aitzol Lamikiz, José Antonio Sánchez, Igor Fernández de Bustos:
Simultaneous measurement of forces and machine tool position for diagnostic of machining tests. 2329-2335 - Shouchen Dun, Zong-Ming Li:
Visualization of multidigit manipulation mechanics: manipulation mechanics. 2336-2341 - Lei Fang, Panos J. Antsaklis, Luis Antonio Montestruque, M. Brett McMickell, Michael D. Lemmon, Yashan Sun, Hui Fang, Ioannis Koutroulis, Martin Haenggi, Min Xie, Xiaojuan Xie:
Design of a wireless assisted pedestrian dead reckoning system - the NavMote experience. 2342-2358 - Paolo Ferrari, Alessandra Flammini, Daniele Marioli, Emiliano Sisinni, Andrea Taroni:
A Bluetooth-based sensor network with Web interface. 2359-2363 - Pascale Godts, Daniel Dupont, Didier Leclercq:
Direct measurement of the latent heat of evaporation by flowmetric method. 2364-2369 - Silvano Gori, Douglas Hay, Claudio Narduzzi:
Measurement of the increase in delay distortion for ADSL splitters. 2370-2375 - Blair D. Hall:
Propagating uncertainty in instrumentation systems. 2376-2380 - Shih-Yuan Huang, Chi-Wu Mao, Kuo-Sheng Cheng:
A VQ-based approach to thermal image analysis for printed circuit boards diagnosis. 2381-2388 - Dana Hughes, Reza Zoughi:
A novel method for determination of dielectric properties of materials using a combined embedded modulated scattering and near-field microwave techniques-Part I: forward model. 2389-2397 - Dana Hughes, Reza Zoughi:
A novel method for determination of dielectric properties of materials using a combined embedded modulated scattering and near-field microwave techniques-Part II: dielectric property recalculation. 2398-2401 - Anwar A. Khan, Sadanand Bimal, K. K. Dey, Shibendu Shekhar Roy:
Novel RC sinusoidal oscillator using second-generation current conveyor. 2402-2406 - Akira Kimoto, Takayuki Nakatani, Yu-Ichiro Matsuoka, Katsunori Shida:
Reconstruction of temperature patterns in the cylindrical head model from electrical capacitance tomography. 2407-2411 - Ming-Han John Lee, Richard J. Collier:
Sheet resistance measurement of thin metallic films and stripes at both 130 GHz and DC. 2412-2415 - W. F. Lee, Pak Kwong Chan:
An injection-ing switch for switched-capacitor circuit applications. 2416-2426 - Felix A. Levinzon:
Measurement of low-frequency noise of modern low-noise junction field effect transistors. 2427-2432 - Xiujun Li, Gerard C. M. Meijer:
A low-cost and accurate interface for four-electrode conductivity sensors. 2433-2437 - Martin Litzenberger, Christoph Furböck, Sergey Bychikhin, Dionyz Pogany, Erich Gornik:
Scanning heterodyne interferometer setup for the time-resolved thermal and free-carrier mapping in semiconductor devices. 2438-2445 - Martin R. Marcin:
Digital receiver phase meter for LISA. 2446-2453 - János Márkus, István Kollár:
On the monotonicity and linearity of ideal radix-based A/D converters. 2454-2457 - Andrew A. Moulthrop, Michael S. Muha, Christopher P. Silva:
On the frequency response symmetry of diode mixers. 2458-2461 - Lorant A. Muth, Chih-Ming Wang, Timothy Conn:
Robust separation of background and target signals in radar cross section measurements. 2462-2468 - Johann W. Odendaal, Johan Joubert, Mattheus J. Prinsloo:
Extended edge wave diffraction model for near-field directivity calculations of horn antennas. 2469-2473 - Lorenzo Peretto, Renato Sasdelli, Roberto Tinarelli:
Uncertainty propagation in the discrete-time wavelet transform. 2474-2480 - Guillermo Robles, Romano Giannetti, José Daniel Muñoz Frías:
Short-duration high-frequency quasi-sinusoidal magnetic field generator. 2481-2485 - Luigi Rovati, Giorgia Salvatori, Matteo Bonaiuti:
A PC-controlled nonincremental distance meter based on a comb-spectrum combined with a frequency-modulated continuous wave interferometer. 2486-2492 - YongJune Shin, Edward J. Powers, Tok-Son Choe, Chan-Young Hong, Eun-Seok Song, Jong-Gwan Yook, Jin Bae Park:
Application of time-frequency domain reflectometry for detection and localization of a fault on a coaxial cable. 2493-2500 - Hing Cheung So:
A comparative study of two discrete-time phase delay estimators. 2501-2504 - Hannu Sorvoja, Vuokko-Marjut Kokko, Risto Myllylä, Jari Miettinen:
Use of EMFi as a blood pressure pulse transducer. 2505-2512 - Ai Hui Tan, Keith R. Godfrey, H. Anthony Barker:
Design of computer-optimized pseudorandom maximum length signals for linear identification in the presence of nonlinear distortions. 2513-2519 - Chin-Woo Tan, Sungsu Park:
Design of accelerometer-based inertial navigation systems. 2520-2530 - Jacques Vanier, Martin W. Levine, S. Kendig, Daniel Janssen, Cameron Everson, Michael J. Delaney:
Practical realization of a passive coherent population trapping frequency standard. 2531-2539 - Adam Wozniak, Marek Dobosz:
Factors influencing probing accuracy of a coordinate measuring machine. 2540-2548 - Chunling Yang, Dongyang Zhao, Jingming Dai:
A new method for constructing spectral emissivity models for measuring the real temperature of targets. 2549-2553 - Andrea Zanobini, Gaetano Iuculano, Aldo Ponterio:
Distance scale calibration of optical time-domain reflectometers with the recirculating delay line method. 2554-2556
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-06-30 20:37 CEST by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
