default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCID41st IECON 2015: Yokohama, Japan
- IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, November 9-12, 2015. IEEE 2015, ISBN 978-1-4799-1762-4
- Johannes Falck, Markus Andresen, Marco Liserre:
Active thermal control of IGBT power electronic converters. 1-6 - Omar Abdel-Rahim
, Hirohito Funato, Junnosuke Haruna:
Pseudo single stage flyback current source inverter for grid connected PV applications. 1-6 - Piotr Czyz:
Performance evaluation of a 650V E-HEMT GaN power switch. 7-12 - Xin Deng, Dingli Jiang, Jin Wang, Mingxu Li, Qiaosong Chen:
Study on the 3D printed robotic fish with autonomous obstacle avoidance behavior based on the adaptive neuro-fuzzy control. 7-12 - Birgit Vogel-Heuser:
Plenary Lecture 1: Cyber physical production systems/industry 4.0-challenges in research and industrial application. 11-13 - Andrii Chub, Jacek Rabkowski, Andrei Blinov, Dmitri Vinnikov:
Study on power losses of the full soft-switching current-fed DC/DC converter with Si and GaN devices. 13-18 - Yi Chen, Tian-Hua Liu, Cuong Nguyen-Manh:
Nonlinear controller design for a sensorless matrix-converter IPMSM drive system. 13-18 - Yuxi Wang, Zhan Li, Liaoyuan Lin:
A novel diagnosis method based on flexible error voltage for IGBTs open-circuit faults in voltage-source inverters. 19-24 - R. Sudharshan Kaarthik, K. Gopakumar, Carlo Cecati, István Nagy:
Timing calculations for three level dodecagonal space vector structure from reference phase voltages. 19-24 - Hui Ma, Yunxiang Xie, Wenjing Li, Bing Chen:
Research on direct power control based on sliding mode control for vienna-type rectifier. 25-30 - Shangjian Dai, Cong Zhou, Chuang Liu:
DC-biased SPWM voltage control for six-phase switched reluctance motor drive based on N+2 power electronic converter. 25-30 - Yunmei Fang, Juntao Fei, Kaiqi Ma:
Neural network-based model reference adaptive control of active power filter based on sliding mode approach. 31-36 - Junjie Ge, Xing Huang, Hailian Xie:
Fast equivalent model of isolated bidirectional DC-DC converters for DC microgrid study. 31-35 - Kamil Antoniewicz, Marek Jasinski, Marian P. Kazmierkowski, Mariusz Malinowski:
Experimental research on model predictive control of 3-level 4-leg Flying Capacitor Converter operating as Shunt Active Power Filter. 36-41 - Yunmei Fang, Juntao Fei, Weifeng Yan:
Adaptive backstepping nonsingular terminal sliding control of MEMS gyroscope. 37-42 - Ludwik Zajac, Mariusz Malinowski, Sebastian Stynski, Marek Jasinski:
A new current control of High Instantaneous Power Impulse Converter. 42-47 - Yuko Hirase, Osamu Noro, Kazushige Sugimoto, Kenichi Sakimoto, Yuji Shindo, Toshifumi Ise:
Effects and analysis of suppressing frequency fluctuations in microgrids using virtual synchronous generator control. 43-49 - Qing Fang:
A global optimization framework for parameter estimation of a wind generation unit model. 48-52 - Saeed Haghnazari, Mahmoud Shahbazi, Mohammad Reza Zolghadri:
A new fault detection method for modular multilevel converter semiconductor power switches. 50-55 - Bo Wu, Bogdan M. Wilamowski:
An algorithm for visualization of big data in a two-dimensional space. 53-58 - Hung-Chi Chen, Che-Yu Lu, Cheng-Chiang Yao:
Application of multi-dimensional feedback quantized modulation to inverter-fed two cascaded electrodynamic shakers. 56-61 - Han Yu:
A just-in-time learning approach for sewage treatment process monitoring with deterministic disturbances. 59-64 - Sohailah Alyammahi, Ehab Salahat, Hani H. Saleh, Andrzej Sluzek:
A hardware accelerator for real-time extraction of the linear-time MSER algorithm. 65-69 - Ahmed A. Elserougi, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab Ahmed:
A grid-connected switched PV array. 68-72 - Iván D. Díaz-Rodríguez:
Modern design of classical controllers: Continuous-time first order controllers. 70-75 - Matthias Foehr, Michael Gepp, Jan Vollmar:
Challenges of system integration in the engineer-to-order business. 73-79 - Radoslaw Kot, Sebastian Stynski, Mariusz Malinowski:
Experimental evaluation of hardware-based Global Maximum Power Point Searching methods. 76-81 - Zhirong Xu, Ping Yang, Zhu Chen, Chun-meng Yang, Qun-ru Zheng, Chengli Zheng:
Energy management strategy for medium-voltage Isolated microgrid. 80-85 - Satyajit Hemant Chincholkar, Chok-You Chan:
Design and implementation of an output feedback controller for the Cuk converter. 86-90 - Can Wang, Seyed Mahdi Fazeli, Wooi Ping Hew, Nasrudin Abd. Rahim, Boon-Teck Ooi:
Equivalent circuits of MMC and VSC: Applications. 91-95 - Amjad Anvari-Moghaddam, Juan C. Vasquez, Josep M. Guerrero:
Load shifting control and management of domestic microgeneration systems for improved energy efficiency and comfort. 96-101 - Ayman S. Abdel-Khalik, Mohamed S. Diab, Shehab Ahmed, Ahmed M. Massoud:
A new single tooth winding layout for a single-phase induction motor with segmented stator. 102-107 - Minghao Xu, Martel Tsirinomeny, Alfred C. Rufer:
A flexible and robust power management mechanism based on single-phase Modular Multilevel Converter with integrated energy storage elements. 108-117 - Robin Tanzania, Fook Hoong Choo, Liter Siek:
Design of WPT coils to minimize AC resistance and capacitor stress applied to SS-topology. 118-122 - Danilo X. Llano, Richard A. McMahon:
Torque observer and extended H∞ filter for sensorless control of permanent magnet generators tested on a wind turbine emulator. 123-128 - Ahmed A. Elserougi, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab Ahmed:
A nine-arm modular multilevel converter (9A-MMC) for six-phase medium voltage motor drives. 129-134 - Mehmet Baskin, Bulent Caglar:
μ-Approach based robust voltage controller design for a boost converter used in photovoltaic applications. 135-140 - Kuo-Ing Hwu, Wen-Zhuang Jiang, Jenn-Jong Shieh:
Implementation of type III controller for KY converter based on PSIM. 141-145 - Kuo-Ing Hwu, Wen-Zhuang Jiang, Jenn-Jong Shieh:
Study and simulation on control-to-output transfer function of KY boost converter. 146-149 - Yeu-Torng Yau, Kuo-Ing Hwu, Wen-Zhuang Jiang:
A novel high voltage-boosting converter with active clamp. 150-155 - Yeu-Torng Yau, Kuo-Ing Hwu, Wen-Zhuang Jiang:
One-comparator sampling based on positive-slope and negative-slope saw-toothed waves. 156-161 - Shengrong Zhuo, Yigeng Huangfu:
Robust buck converter design with a high-order sliding mode differentiator. 162-167 - Filippo Sanfilippo, Paul B. T. Weustink, Kristin Ytterstad Pettersen:
A coupling library for the force dimension haptic devices and the 20-sim modelling and simulation environment. 168-173 - Zhihui Chen, Kaidi Zhao, Xiaofei Yu:
Research on a 4-phase wound-field doubly salient generator with compensation capacitors. 174-179 - Jing Lyu, Xu Cai, Marta Molinas:
Impedance modeling of modular multilevel converters. 180-185 - Linna Lv, Lan Xiao, Qi Qi, Huizhen Wang:
Three-phase dual-buck inverter utilizing coupled inductors. 186-191 - Wei Wu, Yuejia Wu:
Computer guided product EMC compliance on user's workshop with a smart phone - Cloud computing. 192-196 - Wei Wu, Yuejia Wu:
Preventing electrical hazards under grounding-fault condition by means of surface leakage protection. 197-201 - Koji Makino, Masahiro Nakamura, Hidenori Omori, Shohei Ueda, Hidetsugu Terada:
Evaluation method of degree of functional recovery on walking rehabilitation based on self-organizing map. 202-204 - Wendy Flores-Fuentes, Daniel Hernandez Balbuena, Julio C. Rodríguez-Quiñonez, Daniel Olivas-Ugalde, Félix Fernando González-Navarro, Oleg Sergiyenko, Moises Rivas-López, Fabian Natanael Murrieta-Rico, Vladimir M. Kartashov:
Outlier mining of a vision sensing databasefor SVM regression improvement. 208-213 - Hiroaki Kato:
Friction model for planar two-dimensional motion. 220-225 - Fabian Natanael Murrieta-Rico, Andrei Tchernykh, Julio C. Rodríguez-Quiñonez, Daniel Hernández-Balbuena, Vitalii Petranovskii, Oscar Raymond-Herrera, Juan Ivan Nieto-Hipólito, Vladimir M. Kartashov, Oleg Sergiyenko, Wendy Flores-Fuentes, Vera Tyrsa:
Rational approximations principle for frequency shifts measurement in frequency domain sensors. 226-231 - Shao-Kai Tseng, Tian-Hua Liu, Jing-Wei Hsu:
Implementation of maximum power recovery for a dual-PMSM system. 232-237 - Saeed Haghnazari, Mohammad Reza Zolghadri:
A novel voltage measurement technique for modular multilevel converter capacitors. 238-243 - Zeyang Liu, Masaru Takeuchi, Masahiro Nakajima, Yasuhisa Hasegawa, Toshio Fukuda, Qiang Huang:
Shape-controlled production of alginate hydrogel-poly-L-lysine microcapsules based on electrodeposition method: Shape-controlled microcapsules. 244-249 - Naveed-ur-Rehman Malik, Chandur Sadarangani, Alija Cosic:
Synchronous operation of a rotating power electronic brushless doubly-fed generator. 250-255 - Tatsuya Sugano, Hiroshi Okajima, Nobutomo Matsunaga:
Robust and precise platoon driving control of welfare vehicles along wheel track by using model error compensator. 256-261 - Yanmin Wang, Hongwei Xia, Yuqing Cao:
Voltage controller of DC-DC buck converter using terminal sliding mode. 262-266 - Ming Yu, Yi Wang, Yonggang Li:
A novel sorting-based multi-objective model predictive control for PMSG wind turbines. 267-272 - Tianhao Wang, Bowen Shi, John Xu, Chris Gerada:
Accuracy improvement of carrier signal injection sensorless control for IPMSM in consideration of inverter nonlinearity. 273-278 - Xiaohui Peng, Masahiro Bessho, Noboru Koshizuka, Ken Sakamura:
DCRDL: An energy management rule definition language for context-based device control in smart buildings. 279-285 - Viet Hung Nguyen, Danwei Wang, Abhisek Ukil, Sivakumar Nadarajan, Viswanathan Vaiyapuri, Chandana Jayampathi:
A closed-form solution to fault parameter estimation and faulty phase identification of stator winding inter-turn fault in induction machines. 286-291 - Marco Bellini, Jan Vobecký:
Programmable mask design for Phase Controlled Thyristors with automated short positioning. 292-297 - Lorenzo Racchetti, Cesare Fantuzzi, Lorenzo Tacconi, Marcello Bonfè:
Towards an abstraction layer for PLC programming using object-oriented features of IEC61131-3 applied to motion control. 298-303 - Wei Li:
Compatible FPGA implementation of capacitor voltage balance control for half-bridge and full-bridge modular multilevel converter. 304-309 - Atsushi Nakata, Akihiro Torii, Susumu Shiozawa, Suguru Mototani:
An impedance voltage compensation and vibration voltage suppression control by using inexact differential in a single-phase PWM inverter. 310-315 - Hong-Tzer Yang, Tzu-Hsuan Tseng, Tsu-Hua Ai, Yen-Hung Wu, Shun-Hao Yeh:
A grid-connected energy conversion system for a treadmill with auto-transferring modes between a motor and a generator. 316-321 - Ahmed A. Elserougi, Shehab Ahmed, Ahmed M. Massoud:
High voltage pulse generator based on DC-to-DC boost converter with capacitor-diode voltage multipliers for bacterial decontamination. 322-326 - Keisuke Yagi, Noriyuki Hori:
A study on loss-of-synchronism in stepping motors based on equilibrium rotor-angles. 327-332 - Omid Geramifard, Tung Le:
Multi-model diagnostics for various machining conditions: A similarity-based approach. 333-338 - Buyun Jing, Mei Chen:
Advanced nonintrusive load monitor for equipment diagnostics on fan coil unit. 339-344 - Alireza Javadi, Abdelhamid Hamadi, Kamal Al-Haddad:
Three-phase power quality device tor weak Systems based on SRF and p-q theory controller. 345-350 - Joao T. de Carvalho Neto, Andrés O. Salazar, André Laurindo Maitelli:
Multi-proposal utilization of One-Cycle Controller in photovoltaic systems for DC applications. 351-356 - Masawee Masdisornchote:
A sentiment analysis framework in implicit opinions for Thai language. 357-361 - Sertac Bayhan, Haitham Abu-Rub:
Model predictive control of quasi-Z source three-phase four-leg inverter. 362-367 - Tomomi Nomura, Yasue Mitsukura:
Extraction of unconscious emotions while watching TV commercials. 368-373 - Abdul Rahman Siddiqi, Shahrul Naim Sidek, Aida Khorshidtalab:
Signal processing of EMG signal for continuous thumb-angle estimation. 374-379 - Peng Hou, Weihao Hu, Mohsen Soltani, Zhe Chen:
A novel energy yields calculation method for irregular wind farm layout. 380-385 - Lihong Idris Lim, Zhen Ye, Dazhi Yang:
Non-contact measurement of POA irradiance and cell temperature for PV systems. 386-391 - Christopher David Townsend, Roberto Alves Baraciarte, Daniel Tormo, Hector Zelaya de la Parra, Georgios D. Demetriades, Vassilios G. Agelidis:
Heuristic model predictive modulation in high power multi-level converters. 392-397 - Hanwen Zhang, Abhisek Ukil:
Framework for multipoint sensing simulation for energy efficient HVAC operation in buildings. 398-403 - Milan Darijevic, Martin Jones, Emil Levi:
An open-end winding drive with a single DC voltage source. 404-409 - Taro Sugihara, Hideki Sakanishi, Akio Gofuku, Katsuhiro Umemoto, Muneou Suzuki, Kenji Araki:
Potential of electronic clinical pathways as triggers for eliciting implicit knowledge. 410-415 - Jin Zhang, Chen Peng, Shaodong Ma, Jie Jiang:
Improved delay-dependent stability criteria for networked control systems via discrete Wirtinger-based inequality. 416-420 - Bakhtyar Hoseinzadeh, Filipe Faria da Silva, Claus Leth Bak:
Improved LVRT grid code under Islanding condition. 421-426 - Oleg Moros, Dieter Gerling:
New flexible harmonic cost effective concentrated winding topology. 427-432 - Hideki Ayano, Yuki Tanaka, Yoshihiro Matsui, Masato Sagawa:
Evaluation of primary-side power supply coil shape to expand the charging area in a contactless power transmission system. 433-438 - Manuele Bertoluzzo, Rupesh Kr. Jha, Giuseppe Buja:
Series-series resonant IPT system analysis under frequency mismatch. 439-444 - Stefan Haller, Peng Cheng, Bengt Oelmann:
Air-gap flux density measurement system for verification of permanent magnet motor FEM model. 445-450 - Zheng Hu, Kay Hameyer:
Robust predictive current control for performance improvement of induction motors with parameter variation. 451-456 - Bin Zhang, Ronghai Qu, Wei Xu, Jian Li:
A permanent magnet traction machine with wide high efficiency range for EV application. 457-463 - Milad Momayyezan, Branislav Hredzak, Vassilios G. Agelidis:
A new multiple converter topology for battery/ultracapacitor hybrid energy system. 464-468 - Mathieu Bressel, Mickaël Hilairet, Daniel Hissel, Belkacem Ould Bouamama:
Fuel cells remaining useful life estimation using an extended Kalman Filter. 469-474 - Alvaro Sobrinho, Jose Bernardo Neto, Paulo Cunha, Leandro Dias da Silva, Angelo Perkusich:
A Colored Petri Nets model of the risk management process based on the ISO 14971 standard. 475-480 - D. M. K. K. Venkateswara Rao, Abhisek Ukil:
Computational fluid dynamics-based thermal modeling for efficient building energy management. 481-486 - Xuefang Li, Jian-Xin Xu, Qinyuan Ren:
Motion control of a robotic fish via learning control approach with self-adaption. 487-492 - Xuemei Zheng, Danmei Ding, Rui Song, Yong Feng:
Research of adaptive full-order Sliding Mode Observer in Permanent Magnet Synchronous Generator. 493-498 - Takashi Suzuki, Hideki Kabune, Norihisa Ito:
Capacitor current reducing control of the inverters for the dual winding motor. 499-504 - Eric Armando, Aldo Boglietti, Enrico Carpaneto, Marco Cossale, Silvio Vaschetto:
Winding thermal model for short-time thermal transient: Validation in motor operative conditions. 505-510 - Fan Yang, Bo Sheng, Yang Fu:
Energy management for fuel cell-supercapacitor hybrid system using passivity-based controller with multi-equilibrium states. 511-516 - Wanicha Ruengkitpinyo, Pikul Vejjanugraha, Waree Kongprawechnon, Toshiaki Kondo, Pished Bunnun, Hirohiko Kaneko:
An automatic glaucoma screening algorithm using cup-to-disc ratio and ISNT rule with support vector machine. 517-521 - Ragini Patel, Chaojie Li, Xinghuo Yu, Brendan P. McGrath:
Network constrained optimal automatic generation control for a two area power System. 522-527 - Akihito Ito, Nobutaka Tsujiuchi, Yusuke Okada:
Multipurpose optimization of camera placement and application to random bin-picking. 528-533 - Qing Duan, Jianhua Wang, Chunyan Ma, Binshi Gu, Baojian Ji, Peng Qiu, Jun You:
Flexible power distribution unit - A novel power electronic transformer development and demonstration for distribution system. 534-537 - Hector Sarnago, Oscar Lucía, Thomas Kimmer, José M. Burdio:
Ultra high efficiency adaptable class-DE inverter for resonant power conversion. 538-543 - Vincent R. H. Lorentz, Radu Schwarz, T. Heckel, Martin März, Lothar Frey:
Integrated galvanically isolated MOSFET and IGBT gate-driver circuit with switching speed control. 544-549 - Dominik Meyer, Jan Haase, Marcel Eckert, Bernd Klauer:
Clock speed optimization of runtime reconfigurable systems by signal latency measurement. 550-555 - Keiju Matsui, Eiji Oishi, Yasutaka Kawata, Mikio Yasubayashi, Masayoshi Umeno, Hideo Uchida, Masaru Hasegawa:
Pursuit of simple power conditioner for photovoltaic small power generation. 556-561 - Ryuga Hosoki, Shuhei Kinjo, Hirotaka Koizumi:
Ripple free operation of two-stage boost type DC-DC converter. 577-582 - Keigo Shimofuji, Akiko Takahashi, Jun Imai, Shigeyuki Funabiki:
A novel voltage - Control method in low-voltage distribution systems: Cooperative - Autonomous switching control. 583-588 - Thi Hoai Linh Nguyen, Takayuki Wada, Izumi Masubuchi, Toru Asai, Yasumasa Fujisaki:
Gossip algorithms for clustering problems. 589-594 - Mario Bermudez, Ignacio González Prieto, Federico Barrero, Mario J. Durán, Xavier Kestelyn:
Open-phase fault operation of 5-phase induction motor drives using DTC techniques. 595-600 - Anubhav Jain, Chinmay Jain, Bhim Singh, Kamal Al-Haddad, Ambrish Chandra:
A dual tangent based algorithm for maximum power point tracking of solar PV systems. 601-606 - Samer Yammine, Maurice Fadel, Duy-Minh Nguyen, Dominique Harribey, Laurent Albert:
Phase current control of a two phase synchronous reluctance machine. 607-612 - José A. Riveros, Daniel Gutiérrez-Reina, Federico Barrero, Sergio Toral, Mario J. Durán:
Five-phase induction machine parameter identification using PSO and standstill techniques. 613-618 - José M. Sosa, Gerardo Escobar, Panfilo R. Martinez-Rodriguez, Gerardo Vázquez, Mario A. Juárez, Juan C. Nava-Cruz:
A model-based controller for a DC-DC boost converter with an LCL input filter. 619-624 - Carlos Bernal, Oscar Lucía, Hector Sarnago, José M. Burdio, Antoni Ivorra, Quim Castellvi:
A review of pulse generation topologies for clinical electroporation. 625-630 - Dorin O. Neacsu:
A simplified approach to implementation of state-space control of DC/DC converters on low-cost microcontrollers. 631-636 - Shohei Ueda, Takahiro Wada:
Modeling of drivers' decision making of merging space on expressways. 637-642 - Tomohiro Egawa, Yusuke Maeda, Hideki Tsuruga:
Two- and three-dimensional caging-based grasping of objects of various shapes with circular robots and multi-fingered hands. 643-648 - Taro Takiguchi, Koichi Furukawa, Koichi Matsumura, Hirotaka Koizumi:
Interleaved soft-switching multilevel boost converter with coupled inductor. 649-654 - Jakeer Hussain, Mahesh K. Mishra:
Design and control process of SEPIC converter for maximum power extraction in wind energy conversion systems. 655-660 - Dapeng Tian:
Linearized gear drive system via bilateral control based twin-drive mechanism. 661-666 - Nelson Okafor, Damian Giaouris, Bashar Zahawi:
Analysis and control of fast scale bifurcation in series connected DC drive operating in continuous conduction mode. 667-671 - Chin-Sien Moo, Yu Jen Chen, Yong-Jyun Li, Hau-Chen Yen:
A dimmable LED driver with partial power regulation. 672-677 - Jingjing Huang, Qian Wang, Yuangang Sun, Xiangqian Tong:
Sliding mode based space-vector hysteresis current control for active power filter. 678-682 - Zhaowen Xu, Hongye Su, Zheng-Guang Wu, Jie Tao:
Distributed asynchronous passive filtering for nonlinear Markov jump systems. 683-687 - Hugo Martins, Fábio Januário, Luís Brito Palma, Alberto Cardoso, Paulo Gil:
A machine learning technique in a multi-agent framework for online outliers detection in Wireless Sensor Networks. 688-693 - Usman Habib, Gerhard Zucker, Max Blochle, Florian Judex, Jan Haase:
Outliers detection method using clustering in buildings data. 694-700 - Cristina Martín, Manuel R. Arahal, Federico Barrero, Mario J. Durán, Sergio Toral:
Rotor current observer in finite-state model predictive control of five-phase IM. 701-706 - Suresh Krishnamoorthy, Devishree Jayabal:
Reducing specific energy consumption by conserving energy and increasing energy efficiency in low tension distribution and utilisation - A case study. 713-718 - Kerui Li, Yafei Hu, Adrian Ioinovici:
A new switching cell for a family of large DC gain non-isolated converters. 719-724 - Hengwei Lin, Josep M. Guerrero, Juan C. Vasquez, Chengxi Liu:
Adaptive distance protection for microgrids. 725-730 - Hengwei Lin, Chengxi Liu, Josep M. Guerrero, Juan C. Vasquez:
Distance protection for microgrids in distribution system. 731-736 - Maria El Achkar, Rita Mbayed, Georges Salloum, Sandrine Le Ballois, Nicolas Patin, Eric Monmasson:
Control of a cascaded doubly fed induction generator supplying an isolated DC grid. 737-742 - Nina M. Roscoe, Yanni Zhong, Stephen J. Finney:
Comparing SiC MOSFET, IGBT and Si MOSFET in LV distribution inverters. 743-748 - Huu-Nhan Nguyen, Hong-Hee Lee:
A DSVM method to improve output performance for matrix converters. 749-754 - Amir Tahavorgar, John E. Quaicoe:
An active-clamping resonant flyback DC/DC converter with improved output power transfer. 755-764 - Fusaomi Nagata, Shohei Hayashi, Tomoya Nagatomi, Akimasa Otsuka, Keigo Watanabe, Maki K. Habib:
Robotic trajectory following controller with a capability for generating micro vibrational motion along curved surface. 765-770 - Mohamed Haddad, Salem Rahmani, Abdelhamid Hamadi, Kamal Al-Haddad:
Improving power quality using a new single phase multilevel active power filter. 771-776 - Kodai Abe, Kiyoshi Ohishi, Hitoshi Haga:
Fine current harmonics suppression control for the input current of electrolytic capacitor-less inverter for IPMSM. 777-782 - Shota Yamada, Kenji Inukai, Hiroshi Fujimoto, Kenji Omata, Yuki Takeda, Susumu Makinouchi:
Proposal of Self Resonance Cancellation Control without using drive-side information. 783-788 - Jaepil Ban, Wookyong Kwon, Sangchul Won:
Fault estimation and fault-tolerant control of vapor compression cycle systems. 789-794 - Yue Yang, Mohammad Karimadini, Cheng Xiang, Rodney Swee Huat Teo, Ben M. Chen, Tong Heng Lee:
Wide area surveillance of urban environments using multiple Mini-VTOL UAVs. 795-800 - Kui Wang, Yongdong Li, Zedong Zheng, Lie Xu, Boran Fan:
A capacitor voltage balancing strategy for a five-level hybrid-clamped inverter. 801-806 - Sheng-Ming Yang, Jia-Hao Zhang, Jun-Ying Jiang:
A maximum torque control strategy for wound-field flux switching motor drives. 807-810 - Franck Scuiller:
Third harmonic current injection to reduce the pulsating torque of a five-phase SPM machine. 811-816 - Yoshiaki Seki, Kiyoshi Ohishi, Yuki Yokokura, Yuji Ide, Daigo Kuraishi:
Quick torque ripple suppression controlled fast position servo based on hybrid system of disturbance observer and torque ripple table. 817-822 - Uzair Javaid, Drazen Dujic, Wim van der Merwe:
MVDC marine electrical distribution: Are we ready? 823-828 - Peng Yao, Honglun Wang, Zikang Su:
Hybrid UAV path planning based on interfered fluid dynamical system and improved RRT. 829-834 - Michael Flankl, Arda Tüysüz, Johann W. Kolar:
Analysis and power scaling of a single-sided linear induction machine for energy harvesting. 835-842 - Guilherme Bueno Mariani, Abdelhadi Besri, Nicolas Voyer, Christian Chillet, Marylin Fassenet, Lauric Garbuio:
Synchronous reluctance motor multi-static MEC model. 843-848 - Said Talbi, Augustin Mpanda Mabwe, Ahmed El Hajjaji:
Control of a bidirectional dual active bridge converter for charge and discharge of a Li-Ion Battery. 849-856 - Jawad Khoury, Rita Mbayed, Georges Salloum, Eric Monmasson:
Comparison of the water heating technique's impact on the sizing of a standalone PV-battery backup system assisting an intermittent primary energy source. 857-862 - Jagath Sri Lal Senanayaka, Hamid Reza Karimi, Kjell G. Robbersmyr:
Sensorless small wind turbine with a sliding-mode observer for water heating applications. 863-868 - Akimasa Otsuka, Fusaomi Nagata, Maki K. Habib, Keigo Watanabe:
Algorithm for swarming and following behaviors of multiple mobile robots. 869-874 - Atsushi Suzuki:
Application of decoupling hybrid control for cold rolling mill with disturbance observer. 875-880 - Daisuke Gunji, Takehiro Imura, Hiroshi Fujimoto:
Operating point setting method for wireless power transfer with constant voltage load. 881-886 - Lin Ma, Tamas Kerekes, Remus Teodorescu, Fen Tang, Xinmin Jin, Yibin Tong, Jingzhe Liang:
Leakage current analysis of single-phase transformer-less grid-connected PV inverters. 887-892 - Lei Li, Yue Guan, Aihua Ma, He Shi, Kai Yao, Jianhu Yan, Lili Fan:
Novel family of forward mode three-level direct AC converters. 893-898 - Wangjing Tan, Qian Wang, Jiandong Duan, Zan Ye, Jingjing Huang:
Suppression of arc grounding overvoltage by using ZnO nonlinear resistance grounding mode. 899-904 - Naoki Mitamura, Junya Kawabata, Yoshiyuki Kusunoki, Yuichi Onozawa, Yasuyuki Kobayashi, Ikawa Osamu:
The new 7th generation IGBT module with high compactness and high power density. 905-908 - Bo Zhou, Meng Li, Kun Qian, Xianzhong Dai, Fang Fang:
Long-range outdoor localization of a mobile robot using a binocular camera. 909-914 - Gu Ye, Yu Xiang, Vladimir Cuk, Joseph F. G. Cobben:
Voltage dip state estimation in distribution networks by applying Bayesian inference. 915-920 - Samet Biricik, Hasan Komurcugil, Malabika Basu:
Sliding mode control strategy for three-phase DVR employing twelve-switch voltage source converter. 921-926 - Jin-san Kim, Feel Soon Kang, Sun-phil Kim, Sung-Jun Park:
Bidirectional DC-to-DC converter for motor control unit of electric vehicle. 927-931 - Jinsung Choi, Jin-san Kim, Giyung Lee, Ki-du Kim, Feel-soon Kang:
Cascaded dc-to-dc converter employing a tapped-inductor for high voltage boosting ratio. 932-937 - Yoshiyuki Kambara, Kouhei Ohnishi:
A design method of observers for bilateral control using dc brushed motor. 938-943 - Emanuel Pablo Vega, Olivier Chocron, Janito Vaqueiro Ferreira, Mohamed Benbouzid, Pablo Siqueira Meirelles:
Evaluation of AUV fixed and vectorial propulsion systems with dynamic simulation and non-linear control. 944-949 - Min Luo, Drazen Dujic:
Permeance based modelling of the core corners considering magnetic material nonlinearity. 950-955 - Zhi-Xiang Zou, Marco Liserre, Zheng Wang, Ming Cheng, Shouting Fan:
Resonance damping in a smart transformer-based microgrid. 956-964 - Christophe Olmi, Franck Scuiller, Jean Frédéric Charpentier:
Reliability assessment of an autonomous underwater vehicle propulsion by using electrical multi-phase drive. 965-970 - Christos S. Ioakimidis, Konstantinos N. Genikomsakis, Panagiotis I. Dallas, Sergio Lopez:
Short-term wind speed forecasting model based on ANN with statistical feature parameters. 971-976 - Tiefeng Gao, Jianfeng Zhao:
Dynamic model for VIENNA rectifier operating in continuous and discontinuous conduction mode. 977-982 - Konstantinos N. Genikomsakis, Philippe Moeyersoms, Dimitrios Savvidis, Christos S. Ioakimidis:
Supporting electro-mobility in an urban environment with the nomadic agent concept. 983-989 - Mohamed S. Diab, Ahmed A. Elserougi, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab Ahmed:
A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. 990-995 - Panfilo R. Martinez, Gerardo Escobar, José M. Sosa, Gerardo Vázquez, Cesar A. Limones, Samuel Iturriaga:
An improved current mode control of a three-phase rectifier based on positive-sequence detection. 996-1001 - Mussawar Ahmad, Bilal Ahmad, Robert Harrison, Borja Ramis Ferrer, Jose L. Martinez Lastra, James Meredith, Axel Bindel:
A knowledge-based approach for the selection of assembly equipment based on fuel cell component characteristics. 1002-1007 - Shailendra Kumar Sharma, Ambrish Chandra, Maarouf Saad:
Control of three-level NPC converters in DFIG based off-grid wind energy conversion systems. 1008-1013 - Rubén Ortega, Oscar Carranza, Julio C. Sosa, Victor Hugo Garcia, Nancy Y. Ortega:
Application control configurations in a photovoltaic inverter operating in a microgrid. 1014-1019 - Anika Schumann, Joern Ploennigs, Bei Chen:
Understanding building operation from semantic context. 1020-1025 - Gerardo Vázquez, Panfilo R. Martinez-Rodriguez, José M. Sosa, Gerardo Escobar, Mario A. Juárez, Andres A. Valdez:
H5-HERIC based transformerless multilevel inverter for single-phase grid connected PV systems. 1026-1031 - Kazutaka Itako, Bakhsh Hossam, Tsugutomo Kudoh, Qixin Huang:
Development of real time hotspot detection system using scan-method for PV generation system. 1032-1036 - Hao-Jie Zhang, Qiang Lu, Xiao-Dan Zhao, Ping Wang:
An event-triggered finite-time control scheme for unicycle robots. 1037-1042 - Junhua Chen, Ronghai Qu, Jian Li:
Advanced mathematical model for surface mounted permanent magnet machines with equivalent virtual salient rotor. 1043-1048 - Hosho Chibana, Manabu Yoshino, Masashi Tadokoro, Daisuke Murayama, Ken-Ichi Suzuki, Ryogo Kubo:
Disturbance-observer-based active queue management with time delay using software-defined networking controller. 1049-1054 - Haiyue Zhu, Tat Joo Teo, Chee Khiang Pang:
Analysis of force harmonics and eddy current damping for 2 DOF moving magnet linear motor. 1055-1060 - Md. Moinul Islam, Md Nayim Kabir, Charles W. Brice:
Time-frequency-based assessment of grid frequency deviation caused by wind power fluctuations. 1061-1066 - Heng-Chao Yan, Jun-Hong Zhou, Chee Khiang Pang:
A two-step precognitive maintenance framework for equipment fault diagnosis with imbalanced data. 1067-1072 - Muhamamad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano:
Fundamental study on control strategies to increase efficiency of dual active bridge DC-DC converter. 1073-1078 - Heng-Chao Yan, Jun-Hong Zhou, Chee Khiang Pang:
Cost optimization on warning threshold and non-fixed periodic inspection intervals for machine degradation monitoring. 1079-1084 - Mao-Mao Meng, Bao-Lin Zhang, Qing-Long Han, Xian-Ming Zhang, Haihong Wang:
Robust sampled-data H∞ control for offshore steel jacket platforms. 1085-1090 - Niclas Johannesson, Staffan Norrga:
Longitudinal differential protection based on the Universal Line Model. 1091-1096 - Abhijit Kshirsagar, R. Sudharshan Kaarthik, Loganathan Umanand, K. Gopakumar, Kaushik Rajashekara:
Nine level inverter for open end induction motor with eight switches per phase. 1097-1102 - Mohammad Reza Riahi, Behzad Esmaeilnejad, Farzad Tahami:
Speed control of servo drives with a flexible coupling using a modified luenberger observer. 1103-1108 - Hiroaki Ochi, Hitoshi Kino, Kenji Tahara, Yuki Matsutani:
Geometrie conditions for feedforward positioning of musculoskeletal tendon-driven structure. 1109-1114 - Bryan B. Navarro, Datu Amil Hussien O. Asakil, Maricar M. Navarro:
Medium voltage to low voltage power flow solution using modified backward/forward sweep algorithm. 1115-1120 - Naoki Kawai, Yukito Kushino, Hirotaka Koizumi:
MPPT controled piezoelectric energy harvesting circuit using synchronized switch harvesting on inductor. 1121-1126 - Josey Mathew, Ming Luo, Chee Khiang Pang, Hian-Leng Chan:
Kernel-based SMOTE for SVM classification of imbalanced datasets. 1127-1132 - Wenlong Li, K. T. Chau:
Complex-conjugate control of a linear magnetic-geared permanent-magnet machine for Archimedes wave swing based power generation. 1133-1138 - Jose A. Antonino-Daviu, Jesús A. Corral-Hernández, Vicente Climente-Alarcon, Hubert Razik:
Case stories of advanced rotor assessment in field motors operated with soft-starters and frequency converters. 1139-1144 - Jochen Barthel, Kilian Jung, Jörg Seewig:
High-voltage DC trailing cable systems for mobile machinery. 1145-1151 - Dao Zhou, Frede Blaabjerg:
Improved DFIG capability during asymmetrical grid faults. 1152-1157 - Mehdi Bagheri, Aravinth Subramaniam, Bhandari Saurabh, S. Chandar, S. Nadarajan, Amit Kumar Gupta, Sanjib Kumar Panda:
Thermal prognosis of dry-type transformer: Simulation study on load and ambient temperature impacts. 1158-1163 - Cristian Garcia, Samir Kouro, Margarita Norambuena, Thierry Meynard, José Rodríguez:
Finite control set model predictive control of a Stacked Multicell Converter. 1164-1169 - Mohamed Sathik, King-Jet Tseng, Chandana Jayampathi Gajanayake, Rejeki Simanjorang, Amit Kumar Gupta:
Comparison of power cycling and thermal cycling effects on the thermal impedance degradation in IGBT modules. 1170-1175 - Hang Seng Che, Wooi Ping Hew:
Dual three-phase operation of single neutral symmetrical six-phase machine for improved performance. 1176-1181 - Javier Morales, Luis García de Vicuña, Ramon Guzman, Miguel Castilla, Arash Momeneh, Javier Torres-Martinez:
Sliding mode control of three-phase grid-connected voltage-source inverter with vector Operation. 1182-1187 - Zhe Chen, Zhenbin Zhang, Ralph Kennel, Guangzhao Luo:
Hybrid sensorless control for SPMSM With multiple saliencies. 1188-1193 - Wouter Brevet, Fabio Sebastiano, Kofi A. A. Makinwa:
A 25 mW smart CMOS wind sensor with corner heaters. 1194-1199 - Frederik De Belie, Araz Darba, Jan A. Melkebeek:
Open-loop behaviour of back-EMF based self-sensing BLDC drives. 1200-1204 - Jinhao Meng, Guangzhao Luo, Elena Breaz, Fei Gao:
A robust battery state-of-charge estimation method for embedded hybrid energy system. 1205-1210 - Ramon Guzman, Luis García de Vicuña, Javier Morales, Miguel Castilla, Jaume Miret, Javier Torres-Martinez:
Sliding-mode control for a three-phase shunt active power filter in natural frame. 1211-1216 - Ramon Guzman, Luis García de Vicuña, Javier Morales, Arash Momeneh, Jaume Miret, Javier Torres-Martinez:
Active damping based on Ackermann's formula for a three-phase voltage source inverter with LCL filter. 1217-1222 - Mrinal Kanti Sarkar, Subrata Banerjee:
DSP based implementation of piecewise linear control scheme for wide air-gap control of an electromagnetic levitation system. 1223-1227 - Javier Torres-Martinez, Miguel Castilla, Jaume Miret, Mohammad Moradi Ghahderijani, Javier Morales, Ramon Guzman:
Dynamic model of a grid-connected three-phase inverter with slope voltage control. 1228-1233 - Tim Dethlefs, Thomas Preisler, Wolfgang Renz:
An architecture for a distributed smart grid registry system. 1234-1239 - Gina K. Steinke, Alfred C. Rufer:
Comparison of multistage stacked boost architecture topologies in regards of the relation between duty cycle, number of stages and efficiency. 1240-1245 - Vicente Climente-Alarcon, Sabin Sathyan, Antero Arkkio, Jose A. Antonino-Daviu:
Current variation in a rotor bar during transients due to a hot spot. 1246-1251 - Jaime Punter-Villagrasa, Cristina Páez-Avilés, Jordi Colomer-Farrarons, Jaime López-Sánchez, Esteve Juanola-Feliu, Pere Lluís Miribel-Català, Joan Cid, Maria Kitsara, Miguel Aller-Pellitero, Neus Sabate, Francisco Javier del Campo, Ivon Rodriguez-Villarreal:
A portable point-of-care device for multi-parametric diabetes mellitus analysis. 1252-1257 - Nadim Sakr, Daniel Sadarnac, Alain Gascher:
A new combined bidirectional boost converter and battery charger for electric vehicles. 1258-1263 - Luca Ferraris, Fausto Franchini, Emir Poskovic:
Design optimization of bonded PM BLDC motors with reference to the cogging torque amplitude. 1264-1269 - Joschka zur Jacobsmühlen, Stefan Kleszczynski, Gerd Witt, Dorit Merhof:
Detection of elevated regions in surface images from laser beam melting processes. 1270-1275 - Alexander Schmitt, Mario Gommeringer, Christoph Rollbühler, Paul Pomnitz, Michael Braun:
A novel modulation scheme for a modular multiphase multilevel converter in a power hardware-in-the-loop emulation system. 1276-1281 - Zhenbin Zhang, Zhe Chen, Fengxiang Wang, Chun Wu, Ralph Kennel:
Fully FPGA based performance-enhanced DMPC for grid-tied AFEs with multiple predictions. 1282-1287 - Ahmed Abdelhakim, Paolo Mattavelli, Giorgio Spiazzi:
Split-source inverter. 1288-1293 - Gulnara Zhabelova, Alireza Yavarian, Valeriy Vyatkin, Alex Q. Huang:
Data center energy efficiency and power quality: An alternative approach with solid state transformer. 1294-1300 - Jaime W. Zapata, Marcelo A. Pérez, Samir Kouro:
Design of a cleaning program for a PV plant based on the analysis of short-term and long-term effects. 1301-1306 - Hang Gao, Soumitra Das, Bin Wu, Manish Pande, David Xu:
A space vector modulation based direct torque control scheme for a current source inverter fed induction motor drive. 1307-1312 - Ugur Tümerdem, Muaz Demir:
L2 stable transparency optimized two channel teleoperation under time delay. 1313-1320 - Brijesh Kumar Kushwaha, Gautam Rituraj, Praveen Kumar:
Mathematical model of series-series compensation for contactless power transfer system. 1321-1326 - Xin Chang, Minxiao Han, Chao Zheng:
Power control analysis for variable speed pumped storage with full-size converter. 1327-1332 - Jeziel Vázquez, Nimrod Vázquez, Joaquin Vaquero, Ivan Méndez, Claudia Hernández, Hector López:
An integrated transformerless photovoltaic inverter. 1333-1338 - Ivan Méndez, Nimrod Vázquez, Joaquin Vaquero, Jeziel Vázquez, Claudia Hernández, Hector López:
Multifunctional grid-connected photovoltaic-system controlled by sliding mode. 1339-1344 - Avik Bhattacharya, Brijesh Brijwasi, Haris Ahmed:
A novel PMSG based WECS for grid integration using DMC. 1345-1350 - Biaoguang Sun, Yunxiang Xie, Hui Ma:
An enhanced repetitive control strategy for shunt active power filter with LCL output filter. 1351-1356 - Ajit Kumar, Avik Bhattacharya:
Three level Z source inverter based photovoltaic power conversion systems. 1357-1362 - Yiran Chang, Gang Shi, Jianwen Zhang, Xu Cai:
Analysis and design of a MMC based wind power converter for offshore dc grids. 1363-1368 - Satoshi Ishibushi, Akira Taniguchi, Toshiaki Takano, Yoshinobu Hagiwara, Tadahiro Taniguchi:
Statistical localization exploiting convolutional neural network for an autonomous vehicle. 1369-1375 - Nobuo Satoh, Hirotaka Otake, Takashi Nakamura, Takashi Hikihara:
A flyback converter using power MOSFET to achieve high frequency operation beyond 13.56 MHz. 1376-1381 - Jens Schmenger, Stefan Zeltner, Reinhard Kramer, Stefan Endres, Martin März:
A 3.7 kW on-board charger based on modular circuit design. 1382-1387 - Liaoyuan Lin, Qian Guo, Jian Hu, Hao Ma:
An enhanced power sharing strategy for islanded microgrids using adaptive virtual impedances. 1388-1393 - Fumiaki Takemura, Norimitsu Sakagami, Satoru Takahashi, Rintaro Ono, Yumiko Nakanishi, Natsuki Uechi, Kazuma Noha, Kuniaki Kawabata, Shinichi Sagara, Chiaki Katagiri, Yuji Yamamoto:
A basic experiment for image-based position measurement of objects at sea. 1394-1399 - Yusuke Asai, Yuki Yokokura, Kiyoshi Ohishi:
Reproduction of haptic sensations for high-stiffness environment considering mechanical admittance. 1400-1405 - Maria Teresa Outeiro, Giuseppe Buja:
Comparison of resonant power converters with two, three, and four energy storage elements. 1406-1411 - Michael Saur, Bastian Lehner, Frank Hentschel, Dieter Gerling, Robert D. Lorenz:
DB-DTFC as loss minimizing control for synchronous reluctance drives. 1412-1417 - Fernando D. Ramirez-Figueroa, Mario Pacas:
Model based control of a PMSM with variable switching frequency and torque ripple control. 1418-1423 - Yusuke Kawai, Yuki Yokokura, Kiyoshi Ohishi, Kotaro Saito, Atsushi Shimamoto:
Equivalence of resonance ratio and I-PD controllers in zero stiffness torque control for soft robot. 1424-1429 - Shivam Prakash Gautam, Lalit Kumar, Shubhrata Gupta:
A modified structure for symmetrical and asymmetrical configuration of multilevel inverter. 1430-1435 - Amardeep B. Shitole, H. M. Suryawanshi, Shelas Sathyan:
Comparative evaluation of synchronization techniques for grid interconnection of renewable energy sources. 1436-1441 - Jacques Marchildon, Mamadou Lamine Doumbia, Kodjo Agbossou:
SOC and SOH characterisation of lead acid batteries. 1442-1446 - Zefan Tang, Minfan Fu, Ming Liu, Chengbin Ma:
Optimization of the compensation capacitors for megahertz wireless power transfer systems. 1447-1452 - Türker Türker, Umit Buyukkeles, Huseyin Mese, Ahmet Faruk Bakan:
A discrete-time current controller for permanent magnet synchronous motor drives. 1453-1458 - Yunyu Tang, Fan Zhu, Yuxi Wang, Hao Ma:
Design and optimizations of solenoid magnetic structure for inductive power transfer in EV applications. 1459-1464 - Witold Pawlus, Geir Hovland, Martin Choux, Damian Frick, Manfred Morari:
Drivetrain design optimization for electrically actuated systems via mixed integer programing. 1465-1470 - Shiying Zhou, Xudong Zou, Donghai Zhu, Yong Kang, Li Tong, Xiaolu Gao:
LCL type grid-connected converter no startup inrush current control method based on capacitor branch voltage feedforward. 1471-1476 - Mehdi Taherzadeh, Sébastien Carriere, Mahmood Joorabian, Franck Betin, Reza Kianinezhad, Gérard-André Capolino:
On-line observer modification of a six-phase induction generator in faulted mode. 1477-1482 - Alisson Thomas Barden, Luís Fernando Alves Pereira:
Robust control design of multiple resonant controllers applied to three-phase UPS inverter under unbalanced and nonlinear loads. 1483-1488 - Sokchea Am, Pierre Lefranc, David Frey, Mahmoud Ibrahim:
A generic virtual prototyping tool for multilevel modular converters (MMCs). 1489-1494 - Zhijian Yin, Manxin Chen, Kerui Li, Adrian Ioinovici:
A new ZCS PWM full-bridge converter of buck-type for applications with very high input voltage. 1495-1500 - Shirin Fartash Toloue, Mehrdad Moallem:
A multi-surface sliding-mode extremum seeking controller for alternator maximum power point tracking. 1501-1506 - Yuichiro Koiwa, Jun Miura, Koki Nakagawa:
Human activity modeling and prediction for assisting appliance operations. 1507-1512 - Chin E. Lin, Thanakorn Supsukbaworn, Ying-Chi Huang, Kai-Ti Jhuang, Chia-Hsun Li, Chin-Yu Lin, Szu-Yu Lo:
Engine controller for hybrid powered dual quad-rotor system. 1513-1517 - Kohjiro Hashimoto, Shinji Doki, Kae Doki:
Estimation of next human action and its timing based on the human action model with timing probabilistic distribution. 1518-1523 - Chen-Wei Yang, Valeriy Vyatkin:
Modelling of IEC 61850 message passing for automatic generation of distributed control. 1524-1529 - Thomas Windisch, Wilfried Hofmann:
Loss minimizing and saturation dependent control of induction machines in vehicle applications. 1530-1535 - Radu Schwarz, Kathrin Semmler, Martin M. Wenger, Vincent R. H. Lorentz, Martin März:
Sensorless battery cell temperature estimation circuit for enhanced safety in battery systems. 1536-1541 - Mario J. Durán, Ignacio González Prieto, Federico Barrero, Michele Mengoni, Luca Zarri, Emil Levi:
A simple braking method for six-phase induction motor drives with diode front-end rectifier. 1542-1547 - Marjan Alavi, Danwei Wang, Ming Luo:
Model-based diagnosis and fault tolerant control for multi-level inverters. 1548-1553 - Ausiàs Garrigós, José M. Blanes, Roberto Gutiérrez, Marcos Compadre, Craig Clark, Malcolm Macdonald:
Investigation into the potential use of integrated switching regulators for low-voltage, low-power phovotovoltaic conversion in space applications. 1554-1560 - Chengquan Ju, Peng Wang:
Dynamic optimal power flow including energy storage with adaptive operation costs. 1561-1566 - Ravi Nath Tripathi, Tsuyoshi Hanamoto:
FRIT based optimized PI tuning for DC link voltage control of grid connected solar PV system. 1567-1572 - Yafei Hu, Kerui Li, Manxin Chen:
Diode-capacitor-inductor network based DC/DC converters with high power density for high voltage gain step-up applications. 1573-1578 - Donghai Zhu, Xudong Zou, Qingjun Huang, Shiying Zhou, Xiaolu Gao, Yong Kang:
Feedforward current reference control for DFIG during grid faults. 1579-1584 - Dong Wang, Huangda Lin, Siwei Cheng, Zhewu Jia, Xiaoqin Zheng:
A novel circular winding brushless DC(CWBLDC) machine with low torque ripple. 1585-1591 - Jiaxin Li, Feng Lin, Ben M. Chen:
A statistical approach for trajectory analysis and motion segmentation for freely moving cameras. 1592-1597 - Gerardo Escobar, Panfilo R. Martinez-Rodriguez, Erick I. Pool, Angel E. Peña-Quintal, Gerardo Vázquez, José M. Sosa:
A model-based controller of a three-level stacked-cell grid connected converter. 1598-1603 - Gerardo Escobar, Sami Pettersson, Carl Ngai Man Ho, Manuel J. Lopez-Sanchez, Panfilo R. Martinez-Rodriguez:
Current control of a three-phase inverter grid connected through an LCL filter. 1604-1609 - Tuyen V. Vu, Sanaz Paran, Fernand Diaz, Touria El Meyzani, Chris S. Edrington:
Model predictive control for power control in islanded DC microgrids. 1610-1615 - Ji Hoon Hyun, Dong Sam Ha, Daniel Daeick Han, Chong-Min Kyung:
A solar energy harvesting system for a portable compact LED lamp. 1616-1621 - Li-Ren Yu, Donghui Ye, Chin-Sien Moo:
Discharging scenario of serial buck-boost battery power modules with fault tolerance. 1622-1626 - Yasuhiro Akagi, Pongsathorn Raksincharoensak:
An analysis of an elderly driver behaviour in urban intersections based on a risk potential model. 1627-1632 - Yanfeng Chen, Xi Chen, Bo Zhang, Dongyuan Qiu:
A new analyzing scheme for non-integer order DC/DC converters. 1633-1638 - Hajime Kubo, Yasuhiro Yamamoto, Takeshi Kondo, Kaushik Rajashekara, Bohang Zhu:
PWM method for open-end winding machines using small triangle space vectors without inverter output clamping. 1639-1644 - Olive Ray, Santanu Mishra:
Integrated hybrid output converter as power router for renewable-based nanogrids. 1645-1650 - Akimasa Niwa, Takanori Imazawa, Tomonori Kimura, Takanari Sasaya, Takanori Isobe, Hiroshi Tadano:
Novel dead time controlled gate driver using the current sensor of SiC-MOSFET. 1651-1656 - Sotaro Maejima, Toshiyuki Murakami:
Driving assist control of electric vehicle by steer-by-wire system considering collision avoidance of traveling bicycle. 1657-1661 - Andreja Rojko, Darko Hercog:
Motion control and teleoperation challenge. 1662-1667 - Tomomichi Noguchi, Hiroaki Nishi:
Active controlled shutter for effective cooling of servers in data center. 1668-1673 - Jia Yao, Jianfeng Zhao, Alexander Abramovitz:
Modeling of the Tapped Inductor SEPIC converter by the TIS-SFG approach. 1674-1679 - Jose A. Antonino-Daviu, Konstantinos Gyftakis, Raul Garcia-Hernandez, Hubert Razik, António J. Marques Cardoso:
Comparative influence of adjacent and non-adjacent broken rotor bars on the induction motor diagnosis through MCSA and ZSC methods. 1680-1685 - Hoonyoung Lee, Hyunmin Hwang, Youngwoo Lee, Donghoon Shin, Chung Choo Chung:
Nonlinear H2 velocity control for permanent magnet synchronous motors. 1686-1691 - Ilro Lee, Yunsik Kim, Donghoon Shin, Youngwoo Lee, Chung Choo Chung:
Nonlinear adaptive speed control for permanent magnet synchronous motors under unbalanced resistances. 1692-1697 - Jianwei Zhang, David George Dorrell, Li Li, Ahmadreza Argha:
A novel sliding mode controller for DC-DC boost converters under input/load variations. 1698-1703 - Mario Gommeringer, Alexander Schmitt, Felix Kammerer, Michael Braun:
An ultra-efficient maximum power point tracking circuit for photovoltaic inverters. 1704-1709 - Bo Qi, Dajun Du, Minrui Fei, Jian-Sen Yang:
H2/H∞ filtering of hybrid networks with random packet losses. 1710-1715 - Yanjun Cao, Yuquan Leng, Jinyun Sun, Yang Zhang, Weimin Ge:
360botG2 - An improved unit of mobile self-assembling modular robotic system aiming at exploration in real world. 1716-1722 - Xiang Zhang, Liping Zhou, Dongyuan Qiu, Wenxun Xiao, Bo Zhang, Fan Xie:
Phase-modular three-phase isolated bridgeless PFC converter. 1723-1728 - Valentin G. Ivanov, Dzmitry Savitski, Javier Orús, José Manuel Rodriguez-Fortun, Aldo Sorniotti, Patrick Gruber:
All-wheel-drive electric vehicle with on-board motors: Experimental validation of the motion control systems. 1729-1734 - Shuhei Iwata, Kunihiro Ogata, Sho Sakaino, Toshiaki Tsuji:
Specular reflection removal with high-speed camera for video imaging. 1735-1740 - Puvan Arumugam, Zeyuan Xu, Gaurang Vakil, Tahar Hamiti, Serhiy Bozhko, Chris Gerada, Steve Pickering:
Solid rotor interior permanent magnet machines for high speed applications. 1741-1746 - Chowarit Mitsantisuk, Sorawit Stapornchaisit, Nakhon Niramitvasu, Kiyoshi Ohishi:
Force sensorless control with 3D workspace analysis for haptic devices based on delta robot. 1747-1752 - Rodrigo Teixeira Pinto, Sílvio F. Rodrigues, Epameinondas Kontos, Pavol Bauer, Braham Ferreira:
Optimal power flow in MTDC networks for large offshore wind power plants: Validation of the distributed voltage control strategy. 1753-1758 - Tatsuki Seki, Sho Sakaino, Toshiaki Tsuji:
A method for converting end effectors of various forms into tactile interfaces. 1759-1764 - Nadim Sakr, Alejandro Fernandez Sanchez, Daniel Sadarnac, Alain Gascher:
A combined switched reluctance motor drive and battery charger for electric vehicles. 1770-1775 - He Yin, Minfan Fu, Chen Zhao, Chengbin Ma:
Power distribution of a multiple-receiver wireless power transfer system: A game theoretic approach. 1776-1781 - Santu Kumar Giri, Sarbani Mukherjee, Sibaprasad Chakrabarti, Subrata Banerjee, Chandan Chakraborty:
A double signal PWM scheme for neutral point voltage balancing in three level NPC converters. 1782-1787 - Aimeng Wang, Siwan Shu, Shuhui Dong:
Transient analysis of DFIG-based WECS under three-phase voltage dips via coupled simulation. 1788-1794 - Andres Yenes, Daniela Munoz, Javier Pereda:
Optimal asymmetry for cascaded multilevel converter with cross-connected half-bridges. 1795-1800 - Zhuoli Zhao, Ping Yang, Josep M. Guerrero, Zhirong Xu, Timothy C. Green, Jinyong Lei, Xiaobin Guo, Peng Li:
Dynamic stability analysis of autonomous medium-voltage mixed-source microgrid. 1801-1806 - Luis Alberto Pereira, Luís Fernando Alves Pereira, Sergio Haffner, Guilherme Nicol:
Unbalanced operation of five-phase induction machines using steady state symmetrical components - Part I: Theoretical considerations. 1807-1812 - Luis Alberto Pereira, Luís Fernando Alves Pereira, Sergio Haffner, Alexandre H. da Silveira:
Unbalanced operation of five-phase induction machines using steady state symmetrical components ℄ Part II: Study of typical cases. 1813-1818 - Margarita Norambuena, Sibylle Dieckerhoff, Samir Kouro, José Rodríguez:
Finite control set model predictive control of a stacked multicell converter with reduced computational cost. 1819-1824 - Hidehiro Ikeda, Hideki Ajishi, Tsuyoshi Hanamoto:
Application of fictitious reference iterative tuning to vibration suppression controller for 2-inertia resonance system. 1825-1830 - Kun Qian, Zhijie Chen, Xudong Ma, Bo Zhou:
Mobile robot navigation in unknown corridors using line and dense features of point clouds. 1831-1836 - Hamza Cherragui, Mickaël Hilairet, Stephan Giurgea:
Hardware-in-the-loop simulation of a boost converter with the Xilinx System Generator from Matlab/Simulink. 1837-1842 - Gilbert Hock Beng Foo, Xinan Zhang:
Sensorless stator flux observer for direct torque controlled interior permanent magnet synchronous motor drives using the current derivative approach. 1843-1848 - Chen Zhao, He Yin, Zhongping Yang, Chengbin Ma:
Equivalent series resistance-based real-time control for a battery-ultracapacitor hybrid system. 1849-1854 - Mark Becke, Thomas Schlegl:
Least squares pose estimation of cylinder axes from multiple views using contour line features. 1855-1861 - Larisa Dunai Dunai, Andrés Prieto, Mónica Chillarón, Jose A. Antonino-Daviu:
Education in electric and electronic engineering via students involvement in innovative projects. 1862-1866 - Nikita Uzhegov, Janne Nerg, Juha Pyrhönen:
An analysis of the 6-slot 2-pole high-speed permanent magnet synchronous machines with tooth-coil windings. 1867-1872 - Yijun Zhang, Baoyong Zhang:
Event-triggered network-based synchronization of complex networks with neutral neural network nodes. 1873-1878 - Hikaru Ishihara, Takahiro Nagayama, Hiroki Tomori, Taro Nakamura:
Landing method for a one-legged robot with artificial muscles and an MR brake. 1879-1884 - Hanxiao Lu, Jian Li, Ronghai Qu, Shaofeng Jia:
Loss minimization control of vernier reluctance machines with DC field windings in stator. 1885-1890 - Mario J. Durán, Ignacio González Prieto, Hugo Guzman, Federico Barrero, H. M. Kim:
Unbalanced operation of multiphase wind energy conversion systems connected to microgrids. 1891-1896 - Claudio Sciascera, Paolo Giangrande, Christopher Brunson, Michael Galea, Christopher Gerada:
Optimal design of an electro-mechanical actuator for aerospace application. 1903-1908 - Xin Zhao, Lexuan Meng, Tomislav Dragicevic, Mehdi Savaghebi, Josep M. Guerrero, Juan C. Vasquez, Xiaohua Wu:
Distributed low voltage ride-through operation of power converters in grid-connected microgrids under voltage sags. 1909-1914 - Pedro Roncero-Sánchez, Xavier del Toro García, Alfonso Parreno Torres:
Online method for simultaneous extraction of individual harmonics in three-phase systems. 1915-1921 - Daniel Gutiérrez-Reina, Sergio Toral, Federico Barrero, Mesut Günes:
Dissimilarity metrics for probabilistic broadcasting in wireless multi-hop networks. 1922-1927 - Vanina Pirsan, Vincent Debusschere, Seddik Bacha, Andres A. Ovalle:
Technical and environmental impacts of electric vehicles and renewable energy integration in a distribution grid. 1928-1933 - Nurul Fazlin Roslan, Jon Are Suul, Alvaro Luna, Ignacio Candela, Pedro Rodríguez:
A simulation study of proportional resonant controller based on the implementation of frequency-adaptive virtual flux estimation with the LCL filter. 1934-1941 - Burak Soner, Tarik Uzunovic, E. Emre Ozsoy, Edin Golubovic, Asif Sabanovic:
DSC-based implementation for power control of DFIG in microgrid applications. 1942-1947 - Alberto Castelo Becerra, Wente Zeng, Mo-Yuen Chow, Juan Jose Rodríguez-Andina:
Green city: A low-cost testbed for distributed control algorithms in Smart Grid. 1948-1953 - Wesam Taha, Abdul Rahiman Beig, Igor Boiko:
Design of PI controllers for a grid-connected VSC based on optimal disturbance rejection. 1954-1959 - Yuxin Zhao, Xue Du, Genglei Xia, Renfeng Jia:
A novel SPSA kernel wavelet neural network for model-free PID controller. 1960-1965 - Marenori Kawamura, Shunsuke Ishikuro, Susumu Sato:
Imaging system for determining depth mapping properties by using a liquid crystal lens. 1966-1969 - Valeriy Vyatkin, Cheng Pang, Stavros Tripakis:
Towards cyber-physical agnosticism by enhancing IEC 61499 with PTIDES model of computations. 1970-1975 - Robert Abebe, Gaurang Vakil, Giovanni Lo Calzo, Tom Cox, Chris Gerada, Mark Johnson:
FEA based thermal analysis of various topologies for Integrated Motor Drives (IMD). 1976-1981 - Jianguo Wang, Jiu Dun Yan, Lin Jiang, Jiyan Zou:
Attenuation of low-order current harmonics in three-phase LCL-filtered grid-connected inverters. 1982-1987 - Cheng Pang, Wenbin William Dai, Valeriy Vyatkin:
Towards IEC 61499 models of computation in Ptolemy II. 1988-1993 - Wei Xu, Yajie Jiang, Chaoxu Mu, Hong Yue:
Nonsingular terminal sliding mode control for the speed regulation of permanent magnet synchronous motor with parameter uncertainties. 1994-1999 - Tsubasa Sasaki, Kenji Sawada, Seiichi Shin, Shu Hosokawa:
Model based fallback control for networked control system via switched Lyapunov function. 2000-2005 - Ryota Takahashi, Kiyoshi Ohishi, Hitoshi Haga, Yuki Yokokura:
Stationary reference frame sensorless vector control based on primary flux linkage and sinusoidal complete tracking current controller for IPMSM. 2006-2011 - Shin-ichi Hamasaki, Tsuyoshi Takaki, Shinya Miyazaki, Mineo Tsuji:
Experimental verification of deadbeat control for unified power flow controller. 2012-2017 - Shin-ichi Hamasaki, Yoshihiro Yano, Hirotaka Fukuda, Mineo Tsuji:
Deadbeat control of bidirectional buck/boost DC-DC converter for power leveling system with EDLC. 2018-2023 - Ye Shi, Zai-jun Wu, Xiao-Bo Dou, Ming-qiang Hu:
A composite space vector hysteresis current controller based on duration allocation strategy. 2024-2029 - Marco Antonio Barreto, Francisco Fambrini, José Hiroki Saito:
Microelectrode array signal amplification using stochastic resonance. 2030-2035 - Gerd Bramerdorfer, Günther Weidenholzer, Siegfried Silber, Wolfgang Amrhein, Stephan Lanser:
Measurement-based nonlinear modeling of PMSMs. 2036-2041 - Yueh-Ru Yang:
Design of current-fed push-pull resonant inverters for cold cathode fluorescent lamps. 2042-2046 - Akihito Ono, Satoru Takahashi, Tsuyoshi Suzuki, Kuniaki Kawabata, Fumiaki Takemura, Shun'ichi Kaneko, Hidenori Ishihara:
An attitude correction method for underwater image captured by stationary sensor node. 2047-2052 - Yi-Fan Zhang, Yu-Chu Tian, Wayne Kelly, Colin J. Fidge:
Distributed computing of all-to-all comparison problems in heterogeneous systems. 2053-2058 - Toru Sai, Akira Kitamura, Byung-Gyu Yu, Xiang-Dong Sun, Mikihiko Matsui:
Distributed MPPT PV system with current source inverter. 2059-2064 - Keiko Sato, Hironori Takimoto, Yasue Mitsukura:
Analysis of color categorization for color vision deficient subjects at different luminance levels. 2065-2069 - Burak Sencer, Kosuke Ishizaki:
Smooth polynomial interpolation for point-to-point trajectories with vibration avoidance. 2070-2075 - Junxing Wang, Zhongping Yang, Fei Lin, Yajie Zhao, Huan Xia, Yutong Lu, Xiaohao Zhao:
Thresholds modification strategy of wayside supercapacitor storage considering DC substation characteristics. 2076-2081 - Huan Xia, Zhongping Yang, Fei Lin, Huaixin Chen:
Modeling and state of charge-based energy management strategy of ultracapacitor energy storage system of urban rail transit. 2082-2087 - Rajiv Khosla, Khanh Nguyen, Mei-Tai Chu:
Service personalisation of assistive robot for autism care. 2088-2093 - Yuyu Geng, Zhongping Yang, Fei Lin:
Basic analysis of wireless power transfer systems using super-capacitor as load. 2094-2099 - Antonio D. Martínez-Pérez, Adane Kassa Solomon, Alberto Castellazzi, Bing Lu:
GaN-based consumer application DC-DC converter for PCB embedment technology integration. 2100-2105 - Mengqi Ni, Jingjing Dong, Tianzhen Wang, Diju Gao, Jingang Han, Mohamed El Hachemi Benbouzid:
A hybrid kernel PCA, hypersphere SVM and extreme learning machine approach for nonlinear process online fault detection. 2106-2111 - Gang Yao, Zhichong Lu, Mohamed Benbouzid, Tianhao Tang, Jingang Han:
A virtual synchronous generator based inverter control method for distributed generation systems. 2112-2117 - Yousif Eldigair, Igor Boiko, Abdul Rahiman Beig:
Combined model-based sliding-mode controller for a three-phase voltage source inverter fed induction motor drive. 2118-2123 - Qiaona Lian, Fei Lin, Wei Shi, Zhongping Yang, Hu Sun, Jinghai Jiao, Zhiqiang Zhang:
Analysis of nonlinear oscillation of four-quadrant converter in high-speed trians based on discrete model. 2124-2129 - Hayata Sakai, Kouhei Ohnishi:
A novel viewpoint in bilateral control system with time delay aiming for clear control goals. 2130-2135 - Toshichika Shiobara, Peter Palensky, Hiroaki Nishi:
Effective metering data aggregation for smart grid communication infrastructure. 2136-2141 - Walter Naranjo, Javier E. Pereda, Luis E. Munoz, Camilo A. Cortés:
Energy evaluation of different inverter topologies and modulations used on electrical vehicles. 2142-2147 - Yuta Emura, Toshichika Shiobara, Tomomichi Noguchi, Hiroaki Nishi:
Implementation and evaluation of HEMS management middleware using XML. 2148-2153 - Sakurako Hamatani, Toshiyuki Murakami:
A novel steering mechanism of two-wheeled wheel chair for stability improvement. 2154-2159 - Christopher David Townsend, Yifan Yu, Georgios Konstantinou, Vassilios G. Agelidis:
Capacitance minimisation & alleviation of per-phase power imbalances in cascaded PV converters. 2160-2165 - Koyo Yu, Kouhei Ohnishi, Hiromasa Kawana, Shin Usuda:
Modulated potential field using 5 DoF implant assist robot for position and angle adjustment. 2166-2171 - Roopak Sinha, Sandeep Patil, Cheng Pang, Valeriy Vyatkin, Barry Dowdeswell:
Requirements engineering of industrial automation systems: Adapting the CESAR requirements meta model for safety-critical smart grid software. 2172-2177 - Alp Burak Pehlivan, Erhan Öztop:
Dynamic movement primitives for human movement recognition. 2178-2183 - Xiaodong Wu, Li Yang, Min Xu:
Two-port network based bilateral control of a steer-by-wire system. 2184-2189 - Longcheng Tan, Bin Wu, Sebastian Rivera:
A bipolar-DC-bus EV fast charging station with intrinsic DC-bus voltages equalization and minimized voltage ripples. 2190-2195 - Nicoloy Gurusinghe, Nihal Kularatna, Sean A. Charleston, Jayathu Fernando, W. Howell Round:
Hybridisation techniques for a supercapacitor-assisted temperature modification apparatus for inline water heating. 2196-2200 - Behnam Koushki, Alireza Safaee, Praveen K. Jain, Alireza R. Bakhshai:
A step-up/down single-stage ZVS inverter. 2201-2206 - Biao Zhang, Wangli He:
Sampled-data consensus of nonlinear multi-agent systems with stochastic disturbances. 2207-2212 - Georgios Konstantinou, Josep Pou, Salvador Ceballos, Ricard Picas, Jordi Zaragoza, Vassilios G. Agelidis:
Utilising redundant voltage levels for circulating current control in modular multilevel converters. 2213-2218 - Olli Kilkki, Christian Giovanelli, Ilkka Seilonen, Valeriy Vyatkin:
Optimization of decentralized energy storage flexibility for frequency reserves. 2219-2224 - Wahyono, Alexander Filonenko, Kang-Hyun Jo:
Illegally parked vehicle detection using adaptive dual background model. 2225-2228 - Yifan Yu, Georgios Konstantinou, Christopher David Townsend, Ricardo P. Aguilera, Branislav Hredzak, Vassilios G. Agelidis:
Delta-connected cascaded H-bridge multilevel photovoltaic converters. 2229-2234 - Ryo Hanaoka, Toshiyuki Murakami:
A novel assist device for Tension Pole based movable handrail. 2235-2240 - Minsoo Jang, Takyun Kim, Vassilios G. Agelidis:
Design and implementation of a 200kHz single-phase boost-inverter using silicon carbide semiconductors. 2241-2246 - Jinhai Jiang, Chunbo Zhu, Kai Song, Guo Wei, Qianfan Zhang:
Novel power receiver for dynamic wireless power transfer system. 2247-2251 - Wenbin William Dai, Valeriy Vyatkin:
Reconfigurable elements of execution semantics for industrial cyber-physical systems. 2252-2257 - Jian Hu, Liaoyuan Lin, Hao Ma:
Parallel operation of three-phase inverters with virtual oscillator and multi-resonant control. 2258-2263 - Weiwei Geng, Zhuoran Zhang, Kui Jiang:
A new control strategy of ironless stator axial-flux PM motor fed by inverter with output LC filter. 2264-2269 - Yin Chen, Dan Sun, Bin Lin, Tze Wood Ching, Wenlong Li:
Dead-beat direct torque and flux control based on sliding-mode stator flux observer for PMSM in electric vehicles. 2270-2275 - Sakda Somkun, Viboon Chunkag:
Simple and fast synchronous reference frame current control for single-phase grid-connnected votage souce converters. 2276-2281 - Ali Al Hage Ali, Bernhard Piepenbreier, Dominic Buchstaller, Markus Engel:
A multiple model approach to fault detection and localization in multi-terminal HVDC systems. 2282-2287 - Jieun Lee, Makoto Itoh, Toshiyuki Inagaki:
Limitation of driver's compensation under visual field contraction. 2288-2293 - Saleh Ziaeinejad, Ali Mehrizi-Sani:
A new multilevel converter with granular voltage steps and reduced number of switches. 2294-2299 - Tuan Anh Le, Ryo Aihoshi, Naoki Yamamura, Muneaki Ishida:
A study on parameters identification of electrical emulator of the fuel cell. 2300-2305 - Naoki Oda, Mina Yamazaki:
Experimental evaluations of motion stabilization using image feature tracking for biped walking robot. 2306-2311 - Gil Ha Lee, Yonghao Gui, Chunghun Kim, Chung Choo Chung:
Direct power control for three phase grid connected inverter via port-controlled Hamiltonian method. 2312-2317 - Jake D. Stringfellow, Terrence J. Summers, Robert Eric Betz:
A new arm voltage balancing technique for the control of modular multilevel converters. 2318-2323 - Donny Radianto, Gamal M. Dousoky, Masahito Shoyama:
Design and implementation of fast PWM boost converter based on low cost microcontroller for photovoltaic systems. 2324-2328 - Inus Grobler, Michael N. Gitau:
Conducted EMC modeling for accreditation in DC-DC converters. 2329-2335 - Tomoya Kitamura, Sho Sakaino, Toshiaki Tsuji:
Bilateral control using functional electrical stimulation. 2336-2341 - Kuan-Sheng Ho, Kao-Chih Wu, Ying-Yu Tzou:
Digital control of a bridgeless SEPIC PFC AC-DC converter with variable voltage output. 2342-2347 - Zhichao He, Geng Yang, Languang Lu, Hua Geng:
A modeling method for dynamic V-I characteristics of solid batteries. 2348-2353 - Takahiro Ishikawa, Toshiyuki Murakami:
An approach to 3D gyro sensor based motion analysis in tennis forehand stroke. 2354-2359 - Qingchao Zhang, Ruiqing Ma, Yigeng Huangfu, Ben Zhao:
A novel static fault diagnosis approach for three-phase full-bridge inverter. 2360-2366 - Ning Zhang, Takahiro Yakoh:
Selective sending block determination method based on quad-tree structure for live video streaming systems. 2367-2371 - Peng Dong, Jianwen Zhang, Jing Lv, Xu Cai:
A simple voltage balancing method for modular multilevel converter. 2372-2377 - Yoshiyasu Takase, Hiroshi Nakamura, Minoru Koga, Toru Shikayama, Akihito Toyota:
Position sensorless control with accelerometer for linear and curvilinear synchronous motor. 2378-2383 - Gang Yao, Xiaojun Zhou, Dongdong Li, Lidan Zhou, Huajun Yu:
Research on multi-objective control strategy of split-capacitor-type three-phase four-wire distribution static generator. 2384-2389 - Rahmat Suryana, Wilfried Hofmann:
Experimental investigation of network frequency controlled by wind power plants with doubly fed induction generators. 2390-2396 - Martin Novak, Jaroslav Novak, Oleg Sivkov:
An SiC inverter for high speed permanent magnet synchronous machines. 2397-2402 - Naotaka Fujii, Seiichiro Katsura:
A design method of phase control system for SISO system using Hilbert transformer. 2403-2408 - Kazuhito Takenaka, Takashi Bando, Tadahiro Taniguchi:
Automatic generation of summarized driving video with music and captions. 2409-2414 - David Pánek, Václav Kotlan, Roman Hamar, Ivo Dolezel:
Optimization of inductor for pre- and post-heating metal parts during their edge laser welding. 2415-2420 - Luis M. A. Caseiro, André M. S. Mendes:
Generalized IGBT open-circuit fault diagnosis algorithm with no additional sensors for grid-connected N-level NPC converters. 2421-2426 - Qian Wang, Ryosuke Yamada, Naoki Yamamura, Muneaki Ishida:
A study on damping control method for three-phase-to-single-phase matrix converter system with neutral line. 2427-2432 - Jean Ernst Bester, Ahmed El Hajjaji, Augustin Mpanda Mabwe:
Modelling of Lithium-ion battery and SOC estimation using simple and extended discrete Kalman Filters for Aircraft energy management. 2433-2438 - Norimitsu Ichikawa:
Experimental consideration of electrostatically induced voltage generated by approach and isolation of charged body. 2439-2444 - Alessandro Soldati, Davide Barater, Carlo Concari, Michael Galea, Chris Gerada:
A voltage controlled power resistor circuit for active gate driving of wide-bandgap power devices. 2445-2450 - Ming-Shi Huang, Kuan-Cheng Chen, Chin-Hao Chen:
Modeling and analysis of IPM synchronous motor under six step voltage control by fourier series. 2451-2455 - Clemens Zöller, Thomas M. Wolbank, Markus A. Vogelsberger:
Online insulation condition monitoring of traction machines using inverter induced voltage injection. 2456-2462 - Luís M. A. Caseiro, André M. S. Mendes:
Open-circuit fault diagnosis in neutral-point-clamped UPS inverters with no additional sensors. 2463-2468 - Alessandro Soldati, Davide Barater, Carlo Concari, Giovanni Franceschini:
Comparing control topologies for wide-bandgap power-device drivers: A simulation study. 2469-2474 - Toshiyuki Maeda, Masumi Yajima:
Personal skill identification using time series motion picture data. 2475-2478 - Saif Siddique Butt, Robert Prabel, Harald Aschemann:
Second-order sliding mode control of an innovative engine cooling system. 2479-2484 - Alessandro Soldati, Davide Barater, Francesco Brugnano, Carlo Concari:
Design of a control unit for advanced gate drivers featuring adaptive dead-time and diagnostics. 2485-2490 - Jirapong Jittakort, Anawach Sangswang, Sumate Naetiladdanon, Saichol Chudjuarjeen, Chayant Koompai:
LCCL series resonant inverter for ultrasonic dispersion system with resonant frequency tracking and asymmetrical voltage cancellation control. 2491-2496 - Sachio Godo, Jan Haase, Hiroaki Nishi:
Air conditioning control using self-powered sensor considering comfort level and occupant location. 2497-2502 - Yukinori Nakamura, Hiroki Kawakami, Shinji Wakui:
Suppression of anti-resonance and resonance in pneumatic system of vibration isolator considering time delay. 2509-2514 - Lixian Zhang, Yanzheng Zhu, Peng Shi:
Resilient estimation for a class of Markov jump linear systems with unideal measurements and its application to robot arm systems. 2515-2520 - Fei Lin, K. T. Chau, Chunhua Liu, Chun Qiu:
Electromagnetic design of a new hybrid-excited flux-switching machine for fault-tolerant operations. 2521-2525 - Marija Jankovic, Alessandro Costabeber, Alan J. Watson, Jon C. Clare:
Control of a grid connected modular multilevel converter under pulsed DC load. 2526-2531 - Naga Brahmendra Yadav Gorla, Kawsar Ali, Chia Chew Lin, Sanjib Kumar Panda:
Improved utilization of grid connected voltage source converters in smart grid through local VAR compensation. 2532-2537 - Ricard Picas, Salvador Ceballos, Josep Pou, Jordi Zaragoza, Georgios Konstantinou, Vassilios G. Agelidis, Josep Balcells:
Discontinuous modulation of modular multilevel converters without the need for extra submodules. 2538-2543 - Xinze Xi, Hua Geng, Geng Yang, Yu Zhou, Jin Lin, Yonghua Song:
Small-signal stability analysis and PHIL experiment validation of power system with WECS voltage/frequency ancillary control. 2544-2549 - Shuhei Shimmyo, Kouhei Ohnishi:
Disturbance observer for dead-time compensation with variable gain and its stability analysis based on popov criterion. 2550-2555 - Václav Kotlan, Lukás Koudela, Ivo Dolezel:
Model of thermal clamping of high-speed machine tools based on novel way of induction heating. 2556-2561 - Wei Meng, Yuchao Hu, Jiaxin Lin, Feng Lin, Rodney Teo:
ROS+unity: An efficient high-fidelity 3D multi-UAV navigation and control simulator in GPS-denied environments. 2562-2567 - Keigo Watanabe, Naoto Okamura, Isaku Nagai:
Closed-loop control experiments for a blimp robot consisting of four-divided envelopes. 2568-2573 - Shu Tamura, Shin-Ichi Ito, Momoyo Ito, Minoru Fukumi:
Method to evaluate similarity of music by music features. 2574-2577 - Takafumi Fujiwara, Masahiro Nakajima, Akihiko Ichikawa, Kenichi Ohara, Yasuhisa Hasegawa, Toshio Fukuda:
Bending of multi-graphene by nanomanipulation assisted with electron beam irradiation for box structure. 2578-2583 - Kazuki Sakuragi, Mingzhao Cheng, Tomonori Kato:
Recorder-playing robot that uses versatile vibrato to mimic a human player. 2584-2588 - Christian M. Lesjak, Daniel M. Hein, Johannes Winter:
Hardware-security technologies for industrial IoT: TrustZone and security controller. 2589-2595 - Shuehi Kurashima, Satoshi Suzuki:
Improvement of activity recognition for child growth monitoring system at kindergarten. 2596-2601 - Harald Aschemann, Robert Prabel:
Robust disturbance compensation for a duocopter by gain-scheduled nonlinear control and observer design. 2608-2613 - Tarik Uzunovic, Asif Sabanovic:
Formation control of differential-drive mobile robots in the framework of functionally related systems. 2620-2625 - Masayoshi Nakamoto, Tomohiro Hirakawa, Torn Yamamoto:
Design of semi-sparse multi-band digital filters using branch and bound method. 2626-2631 - Oleg Moros, Gurakuq Dajaku, Christian Klusmann, Dieter Gerling:
New high voltage 2-pole concentrated winding and corresponding rotor design for induction machines. 2632-2637 - Kae Doki, Keita Suyama, Yuki Funabora, Shinji Doki:
Robust localization for mobile robot by K-L Divergence-based sensor data fusion. 2638-2643 - Yohei Tomita:
Binaural asynchronous component cancellation - An extension of the spatial Wiener filter. 2644-2648 - Yutaka Uchimura, Tooru Suhara:
Model-error feedback design for systems with time-varying delay based on mixed H2/H∞ control. 2649-2654 - Azhar Aulia Saputra, Takahiro Takeda, János Botzheim, Naoyuki Kubota:
Multi-objective evolutionary algorithm for neural oscillator based robot locomotion. 2655-2660 - Achara Pichetjamroen, Toshifumi Ise:
Power control of low frequency AC transmission system using cycloconverters with virtual synchronous generator control. 2661-2666 - Bo Cheng, Gerhard P. Hancke:
A service-oriented architecture for wireless video sensor networks: Opportunities and challenges. 2667-2672 - Wenyu Liang, Sunan Huang, Si-Lu Chen, Kok Kiong Tan:
Disturbance observer based small force detection for an ultrasonic motor with application to a surgical device. 2673-2678 - Ren C. Luo, Yueh-Shiuan Tsai:
On-line adaptive control for minimizing slippage error while mobile platform and manipulator operate simultaneously for robotics mobile manipulation. 2679-2684 - Ren C. Luo, Chao-Wen Huang:
A push-recovery method for walking biped robot based on 3-D flywheel model. 2685-2690 - Guishi Wang, Mihai Ciobotaru, Vassilios G. Agelidis:
Dispatch performance analysis of PV power plants using various energy storage capacities. 2691-2696 - Mario Bermudez, Hugo Guzman, Ignacio González Prieto, Federico Barrero, Mario J. Durán, Xavier Kestelyn:
Comparative study of DTC and RFOC methods for the open-phase fault operation of a 5-phase induction motor drive. 2702-2707 - Satoru Suzuki, Yasue Mitsukura:
Motion artifact removal from photoplethysmography based on weighted band-pass filter. 2708-2712 - Xiangfeng Li, Bo Zhang, Dongyuan Qiu, Lili Qu, Guidong Zhang, Fan Xie:
Modular multilevel converters using split wound coupled inductors. 2713-2716 - Nicole Schmidt, Arndt Lüder, Ronald Rosendahl, Daria Ryashentseva, Matthias Foehr, Jan Vollmar:
For a better understanding of integration. 2717-2722 - Lei Guo, Zhongping Yang, Fei Lin, Xi Tu:
Weighted torque current control for high speed train with dual induction motors fed by a single inverter. 2723-2728 - Mizuho Shibata, Norimitsu Sakagami:
A robot fish encapsulated by an electromagnetic wave-transmitting plastic film. 2729-2734 - Zakarya Oubrahim, Vincent Choqueuse, Yassine Amirat, Mohamed Benbouzid:
An improved algorithm for power system fault type classification based on least square phasor estimation. 2735-2740 - Huangda Lin, Siwei Cheng, Dong Wang, Zhewu Jia:
Load commutation of the circular winding brushless DC machine(CWBLDC). 2741-2746 - Shin-ichi Hamasaki, Takashi Tsubakidani, Syunsuke Eguchi, Mineo Tsuji:
Experimental verification of hexagonal modular multilevel converter for 3-phase system. 2747-2752 - Robert Prabel, Harald Aschemann:
Control design for a reduction of clutch judder in a truck drive train. 2753-2758 - Kimiko Motonaka, Keigo Watanabe, Shoichi Maeyama:
Implementation and basic experiments of kinodynamic motion planning for a quadrotor. 2759-2764 - Esko Pekkarinen, Mikko Teuho, Erno Salminen, Timo D. Hämäläinen:
Resolving parameter reference management in IP-XACT using Kactus2. 2765-2770 - Mauro Di Nardo, Michael Galea, Christopher Gerada, Marco Palmieri, Francesco Cupertino, Salem Mebarki:
Comparison of multi-physics optimization methods for high speed synchrnous reluctance machines. 2771-2776 - Georges el Murr, Antonio Griffo, Jiabin Wang, Zi-Qiang Zhu, B. Mecrow:
Reliability assessment of fault tolerant permanent magnet AC drives. 2777-2782 - Jianyu Feng, Zhelu Li, Yahui Leng, Lenian He, Jianxiong Xi, Kexu Sun:
Design of a high precision chip for detecting electric arc. 2783-2787 - Tiberiu-Gabriel Zsurzsan, Michael A. E. Andersen, Zhe Zhang, Nils A. Andersen:
Preisach model of hysteresis for the Piezoelectric Actuator Drive. 2788-2793 - Satoshi Fukagawa, Hiroshi Fujimoto, Yuki Terada, Shinji Ishii:
Experimental verification of chatter suppression in end milling process using cooperative control of spindle and stage motors. 2794-2799 - S. P. Gawande, P. D. Debre, Manoj R. Ramteke:
A new DSTATCOM topology using hybrid renewable energy based dc-link VSI for power quality applications. 2800-2885 - V. Karthikeyan, Rajesh Gupta:
Closed-loop control of isolated dual active bridge converter using dual phase shift modulation. 2800-2805 - Haoran Wang, Guorong Zhu, Xiaobin Fu, Siyuan Ma, Huai Wang:
Waveform control method for mitigating harmonics of inverter systems with nonlinear load. 2806-2811 - Ehab Salahat, Hani H. Saleh, Andrzej Sluzek, Mahmoud Al-Qutayri, Baker Mohammad, Mohammad Ismail:
A maximally stable extremal regions system-on-chip for real-time visual surveillance. 2812-2815 - Lorenzo Racchetti, Cesare Fantuzzi, Lorenzo Tacconi:
Verification and validation based on the generation of testing sequences from timing diagram specifications in industrial automation. 2816-2821 - Yuyin Chen, Dejan Vasic:
Interfacing circuit for two galloping-based piezoelectric energy harveter. 2822-2877 - Yongheng Yang, Vasile-Simion Sularea, Ke Ma, Frede Blaabjerg:
Advanced design tools for the reliability of power electronics - Case studies on a photovoltaic (PV) system. 2828-2833 - Concettina Buccella, Carlo Cecati, Elena De Santis, Hassan Abdullah Khalid:
Impact of the number of angles and levels on harmonic mitigation in multilevel converters. 2834-2839 - Takuya Matsunaga, Guillaume Fau, Shuhei Shimizu, Kazuki Tanida, Takahiro Mizoguchi, Kouhei Ohnishi:
Double hands manipulation with force sensation realized by multi DoF forceps robots. 2840-2845 - Mengmi Zhang, Hailong Qin, Menglu Lan, Jiaxin Lin, Shuai Wang, Kaijun Liu, Feng Lin, Ben M. Chen:
A high fidelity simulator for a quadrotor UAV using ROS and Gazebo. 2846-2851 - Václav Kotlan, David Pánek, Roman Hamar, Ivo Dolezel:
Model of laser heating with induction pre- and post-heating and its experimental verification. 2852-2857 - Dongwook Seo, Danilo Cáceres Hernández, Alexander Filonenko, Kang-Hyun Jo:
Building detection based on facet for urban reconstruction. 2864-2867 - Akimasa Okada, Akihito Noda, Hiroyuki Shinoda:
Evaluation of isolation property of UWB 2DC tile for coexistence with radio signals. 2868-2873 - Ahmad Ghaderi, Javad Soltani, Mohammad Ebrahimi, Amir Ali Forough Nassiraei:
Modification of electric drive vehicles performances using a direct torque control with over-modulation ability. 2874-2879 - Johannes Graus, Ingo Hahn:
Improved accuracy of sensorless position estimation by combining resistance- and inductance-based saliency tracking. 2886-2891 - Didier Quirin, Valerio Salvucci, Moto Kawanobe, Travis Baratcart, Takafumi Koseki:
Closed form minimum infinity-norm resolution for single-degree kinematically redundant manipulators. 2892-2897 - Zhenyu Lv, Zaijun Wu, Xiaobo Dou, Minqiang Hu:
Discrete consensus-based distributed secondary control scheme with considering time-delays for DC microgrid. 2898-2903 - Dominik Thyroff, Stefan Meier, Ingo Hahn:
Modeling integrated magnetic gears using a magnetic equivalent circuit. 2904-2908 - Yuki Ishihara, Kazuki Sugita, Masaki Tatani, Hirozumi Oku, Minami Takato, Fumio Uchikoba, Ken Saito:
IC design of pulse-type hardware neuron model for piezoelectric element impact-type MEMS microrobot. 2909-2913 - Mauro Di Nardo, Michele Degano, Michael Galea, Chris Gerada, Marco Palmieri, Francesco Cupertino, Nicola Bianchi, David Gerada:
End barrier shape optimizations and sensitivity analysis of synchrnous reluctance machines. 2914-2919 - Tomohiro Yamaguchi, Yuki Tamai, Keiki Takadama:
Analyzing human's continuous learning ability with the reflection cost. 2920-2925 - Mukeshkumar M. Bhesaniya, Anshuman Shukla, Georgios D. Demetriades:
A control method for inductor current balancing in current source modular multilevel converter. 2926-2931 - Bingyong Tai, Congzhe Gao, Xiangdong Liu, Jingliang Lv:
Combination system of var compensation and photovoltaic power generation based on modular multilevel converter. 2932-2937 - Sascha Niedersteiner, Clemens Pohlt, Thomas Schlegl:
Smart Workbench: A multimodal and bidirectional assistance system for industrial application. 2938-2943 - Yanmei Yao, Alija Cosic, Chandur Sadarangani:
Investigation on the dynamic performance of an induction machine using a novel concept of a rotating converter with a floating capacitor. 2944-2949 - Ali Mortezaei, Marcelo Godoy Simões, Ahmed Al-Durra, S. M. Muyeen:
Selective operation of three-level NPC inverter based on synchronous reference frame method supplying nonlinear loads in microgrid system. 2950-2955 - Ryusuke Imai, Ryogo Kubo:
Introducing jitter buffers in networked control systems with communication disturbance observer under time-varying communication delays. 2956-2961 - Cleiton M. Freitas, Luís F. C. Monteiro, Edson H. Watanabe:
Novel control algorithm for a unified power quality conditioner connected to a radial grid. 2962-2967 - Takeshi Kondo, Hirotaka Koizumi:
Class DE voltage-source parallel resonant inverter. 2968-2973 - Han Yu, Shen Yin:
A fault detection strategy based on intelligent particle filter for nonlinear systems. 2974-2979 - Nikhil Korada, Mahesh K. Mishra:
Application of hybrid energy storage system in a grid interactive microgrid environment. 2980-2985 - R. M. Hansika Madhavi Rathnayake, Rukmi Dutta, John E. Fletcher, Dan Xiao:
Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators. 2986-2991 - Philip Dost, Constantinos Sourkounis:
Highly dynamic DC-voltage control by means of a bidirectional three phase voltage source inverter. 2992-2997 - Nurul Ain Mohd Said, Dan Xiao, Rukmi Dutta, John E. Fletcher:
Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding. 2998-3003 - Srikanth Kotra, Mahesh K. Mishra, Nikhil Korada:
Control algorithm for a PV powered BLDC drive for air conditioner application. 3004-3009 - Cong-Long Nguyen, Hong-Hee Lee:
An optimal hybrid supercapacitor and battery energy storage system in wind power application. 3010-3015 - Shen Yin, Mingyu Wang, Hao Luo, Huijun Gao:
Study on kernel partial least squares based key indicator prediction. 3016-3021 - Dusan Janik, Tomás Kosan, Zdenek Peroutka:
The SVPWM modulator with active voltage balancing control for 4-level FLC converter. 3022-3026 - Jonathan Andrea, Patrick Besdel, Olivier Zirn, Marc Bournat:
The electric arc as a circuit component. 3027-3034 - Issam A. Smadi, Saher A. Albatran:
Nonlinear controller-observer design for an inverted pendulum on a cart based on full fuzzy modeling. 3035-3039 - Yanli Liu, Xuebo Yang, Ben Niu, Yang Tang, Okyay Kaynak:
H∞ control of stochastic switched nonlinear systems with average dwell time. 3040-3045 - Naoya Tojo, Ippei Toyomasu, Tomoyuki Shimono, Shinichiro Ishii:
Robotic diagnosis of directional force control performance at an end-effector of a limb toward physiotherapeutic support. 3046-3051 - Wooyoung Choi, Di Han, Casey T. Morris, Bulent Sarlioglu:
Achieving high efficiency using SiC MOSFETs and reduced output filter for grid-connected V2G inverter. 3052-3057 - Marco Cautero, Tomasz Ciesla, Roberto Visintini:
Improvements on the booster magnet power converters at Elettra. 3058-3062 - Farideh Javidi Niroumand, Alireza Kouchaki, Morten Nymand:
A simple core loss modeling for three-phase PWM voltage source converters. 3063-3068 - Sanjeev Kumar Panday, Amit Kumar, Sanjaykumar Patil:
Large-signal model and nonlinear control of PWM converters in discontinuous conduction mode. 3069-3074 - Azlin Ahmad, Rubiyah Yusof, Yasue Mitsukura:
Identifying the dominant species of tropical wood species using histogram intersection method. 3075-3080 - Jianhua Wang, Binshi Gu, Qing Duan, Chunyan Ma, Baojian Ji, Jun You:
Control strategy of solid state power electronic transformer under voltage disturbance conditions. 3081-3085 - Marcel Scheuer, Philip Dost, Constantinos Sourkounis:
Simulation of a torque based hysteresis control in static and low dynamic conditions. 3086-3092 - Zhenya Wang, Xuemei Wang, Bo Zhang:
A magnetic coupled resonance WPT system design method of double-end impedance converter networks with Class-E amplifier. 3093-3098 - Marcel Scheuer, Philip Dost, Constantinos Sourkounis:
Simulation of a torque based hysteresis control in high dynamic conditions. 3104-3109 - Sharmila Sumsurooah, Serhiy Bozhko, Milijana Odavic, Dushan Boroyevich:
Stability and robustness analysis of a DC/DC power conversion system under operating conditions uncertainties. 3110-3115 - Tomoya Imanishi, Rajitha Tennekoon, Peter Palensky, Hiroaki Nishi:
Enhanced building thermal model by using CO2 based occupancy data. 3116-3121 - Ehab Salahat, Hani H. Saleh, Andrzej Sluzek, Mahmoud Al-Qutayri, Baker Mohammad, Mohammad Ismail:
Novel fast and scalable parallel union-find ASIC implementation for real-time digital image segmentation. 3122-3125 - Liuchen Tai, Mingyao Lin, Jianhua Wang, Kai Liu, Tiefeng Gao:
Analysis and design of a wide input range DC-DC converter for high-speed generator energy storage systems. 3126-3131 - Mónica Chillarón, Larisa Dunai, Guillermo Peris-Fajarnés, Ismael Lengua Lengua:
Face detection and recognition application for Android. 3132-3136 - Yunda Yan, Zhiyuan Sun, Shihua Li:
Disturbance rejection control method based on composite disturbance observer for permanent magnet synchronous motor. 3137-3142 - Jun Yoneyama, Masaki Omura, Kenta Hoshino:
Non-fragile static output feedback control design with guaranteed cost of uncertain systems with application to helicopter system. 3143-3147 - Daniel Yuh Chao, Tsung Hsien Yu:
MLR: A new concept to launch a partial deadlock avoidance policy for k-th order system of Petri Nets. 3148-3152 - Yuzo Ohta, Yoshiki Shibutani, Izumi Masubuchi:
Control of a servo press using distributed reference governors. 3153-3158 - Prashant Debre, Rahul Juneja, D. R. Tutakane, Manoj R. Ramteke:
Overvoltage protection scheme for back to back converter of grid connected DFIG. 3159-3162 - Christopher H. T. Lee, K. T. Chau, Chunhua Liu:
A new fault-tolerant flux-reversal doubly-salient magnetless motor drive with four-phase topology. 3163-3168 - Andres A. Ovalle, Ahmad Hably, Seddik Bacha, Vanina Pirsan:
Mixed strategist dynamics application to electrical vehicle distributed load scheduling. 3169-3174 - Ayame Koga, Hiroyuki Okuda, Yuichi Tazaki, Tatsuya Suzuki, Blaine Levedahl, Kentaro Haraguchi, Zibo Kang:
Autonomous lane tracking reflecting skilled/un-skilled driving characteristics. 3175-3180 - Luís M. A. Caseiro, André M. S. Mendes:
Real-time multiple IGBT open-circuit fault diagnosis in three-level neutral-point-clamped converters with no additional sensors. 3181-3186 - Shahab Nejad, Daniel T. Gladwin, David A. Stone:
Enhanced state-of-charge estimation for lithium-ion iron phosphate cells with flat open-circuit voltage curves. 3187-3192 - Yasen A. Harrye, Khaled H. Ahmed, Ahmed A. Aboushady:
DC fault isolation study of bidirectional dual active bridge DC/DC converter for DC transmission grid application. 3193-3198 - Hyuntai Chin, Hiroyuki Okuda, Yuichi Tazaki, Tatsuya Suzuki:
Model predictive cooperative cruise control in mixed traffic. 3199-3205 - Sanjay Tolani, Parthasarathi Sensarma:
Output impedance mitigation at filter resonance for single and three-phase UPS systems with reduced sensor count. 3206-3211 - Akihiko Kawashima, Ryosuke Sasaki, Takuma Yamaguchi, Shinkichi Inagaki, Akira Ito, Tatsuya Suzuki:
Energy management systems based on real data and devices for apartment buildings. 3212-3217 - Kang Li, Shinji Doki, Masami Fujitsuna:
The position sensorless control for the wound-field synchronous motor with double three-phase wound stator in stop/low-speed driving. 3218-3223 - Thai-Thanh Nguyen, Hak-Man Kim, Mario J. Durán:
Applying predictive power control to BESS for mitigation of wind power fluctuations. 3224-3229 - Toshiki Suzuki, Shinji Doki, Masaru Hasegawa:
Evaluation of direct position estimation based on α-β axes inductance information for IPMSM sensorless control systems. 3230-3235 - Chamnan Limsakul, Roongrojana Songprakorp, Anawach Sangswang, Panom Parinya:
Impact of photovoltaic grid-connected power fluctuation on system frequency deviation in contiguous power systems. 3236-3241 - Kapil Jha, Santanu Mishra, Avinash Joshi:
Boost-based amplifier for power-hardware-in-the-loop simulations of utility-tied DG. 3242-3247 - Sho Yokota, Hiroshi Hashimoto, Daisuke Chugo, Kuniaki Kawabata:
A study on definition of the imitation motion - From the viewpoint of imitated person. 3248-3252 - Mahmoud Ibrahim, Pierre Lefranc, David Frey, Luc Gonnet, Jean-Paul Ferrieux, Sokchea Am:
Design optimization of single-phase PFC rectifier using Pareto-Front analysis and including electro-thermal modelling. 3253-3258 - Ephrem Chemali, Lucas McCurlie, Brock Howey, Tyler Stiene, Mohammad Mizanoor Rahman, Matthias Preindl, Ryan M. Ahmed, Ali Emadi:
Minimizing battery wear in a hybrid energy storage system using a linear quadratic regulator. 3265-3270 - Alessandro Galassini, Alessandro Costabeber, Chris Gerada:
Speed droop control of integrated modular motor drives. 3271-3276 - Yanbo Wang, Xiongfei Wang, Frede Blaabjerg, Zhe Chen:
Eigenvalue-based harmonic stability analysis method in inverter-fed power systems. 3277-3282 - Akira Mochizuki, Naoto Yube, Takahiro Hanyu:
Design of a computational nonvolatile RAM for a greedy energy-efficient VLSI processor. 3283-3288 - Emilio J. Palacios-García, Yajuan Guan, Mehdi Savaghebi, Juan C. Vasquez, Josep M. Guerrero, Antonio Moreno-Muñoz, Brian S. Ipsen:
Smart metering system for microgrids. 3289-3294 - Chaoyuan Man, Jun Yang, Shihua Li:
Adaptive disturbance estimation and robust control for bank-to-turn missiles autopilot design. 3295-3300 - Aleksi Mattsson, Vesa Vaisanen, Pasi Nuutinen, Pasi Peltoniemi, Tero Kaipia, Pertti Silventoinen, Jarmo Partanen:
Evaluation of isolated converter topologies for low voltage DC distribution. 3301-3307 - Somchai Nuanprasert, Sueki Baba, Takashi Suzuki:
An efficient method of occluded solder ball segmentation for automated BGA void defect inspection using X-ray images. 3308-3313 - Harald Aschemann, Julia Kersten:
Active tower damping for an innovative wind turbine with a hydrostatic transmission. 3314-3319 - Jane Cornett, Bill Lane, Marc Dunham, Mehdi Asheghi, Kenneth E. Goodson, Yuan Gao, Nian Xiang Sun, Baoxing Chen:
Chip-scale thermal energy harvester using Bi2Te3. 3326-3329 - N. N. V. Surendra Babu, Khalifa Al-Hosani:
A novel DC voltage control for a cascade H-bridge multilevel STATCOM. 3330-3335 - Tarek Ould Bachir, Asma Merdassi, Sébastien Cense, Handy Fortin-Blanchette, Jean Bélanger:
FPGA-based real-time simulation of a PSIM model: An indirect matrix converter case study. 3336-3340 - Andoni Urtasun, Ernesto L. Barrios, Pablo Sanchis, Luis Marroyo:
Frequency-based energy management of stand-alone systems: Design of the control parameters for high versatility. 3341-3346 - Masato Nakai Takeshi Toda, Xinxin Liu:
A close face-distance warning system for straightend neck prevention. 3347-3352 - Preetha Sreekumar, Vinod Khadkikar:
Nonlinear load sharing in low voltage microgrid using negative virtual harmonic impedance. 3353-3358 - Yannick Maret, Martin Zlatanski, Stevan Marinkovic:
Direct and automatic measurement of the overlapping time in GCB applications. 3359-3363 - Xue Han, Henrik W. Bindner, Jasmin Mehmedalic, David Victor Tackie:
Coordinated voltage control scheme for distribution grid with on-load tap-changer and distributed energy resources in a market context. 3364-3369 - Sivakumar Nadarajan, Bicky Bhangu, Sanjib Kumar Panda, Amit Kumar Gupta:
Feasibility analysis of auxiliary winding for condition monitoring of wound field brushless synchronous generators. 3370-3375 - Markus Amhof, Matthias A. Samonig, Thomas M. Wolbank:
Sensorless position estimation from PWM-induced transient excitation in induction machines. 3376-3381 - Talha Boz, Mustafa Unel, Volkan Aran, Metin Yílmaz, Cetin Gurel, Caner Bayburtlu, Kerem Koprubasi:
Diesel engine NOx emission modeling with airpath input channels. 3382-3387 - Takanori Miyoshi, Takashi Imamura, Kazuhiko Terashima:
Stability analysis via IQC for multilateral tele-control and application to multi-client/multi-coupling physical model system. 3388-3392 - Chih-Lyang Hwang, Chia-Hsien Wu, Bo-Lin Chen:
Dynamic balance of humanoid robot using pose classification with incremental proportional derivative dead-zone control. 3393-3398 - Indrajit Sarkar, Baylon G. Fernandes:
High resolution m-cell symmetric cascaded H-Bridge multilevel inverter with one transistor clamped H-Bridge per phase. 3399-3404 - Rui Zhao, Daniel T. Gladwin, David A. Stone:
Wireless power system appling a microcontroller dominated matrix converter. 3405-3410 - P. Chinna D. Goud, Rajesh Gupta, Alok Kumar Singh, Paulson Samuel:
GMPPT of solar PV array under partial shading condition using LabVIEW FPGA. 3411-3416 - Huu-Tam Pham, Jean-Matthieu Bourgeot, Mohamed Benbouzid:
Performance comparison of sensor fault-tolerant control strategies for PMSG-based marine current energy converters. 3417-3422 - V. V. S. Pradeep Kumar, Baylon G. Fernandes:
Active power decoupling topology with fault tolerant ability for a single phase grid connected inverter. 3423-3428 - Shohei Ogawa, Tomoyuki Shimono, Atsuo Kawamura, Takahiro Nozaki:
Position control in normal direction for the fast screw-tightening. 3429-3433 - Vainatey Kulkarni, Ridha Ben Mrad, Eswar Prasad:
Assessment of a piezoelectric energy harvester for a sensor module. 3434-3436 - Jiankun Sun, Jun Yang, Shihua Li, Xisong Chen:
Event-driven output feedback control for a class of nonlinear systems subject to disturbances. 3437-3442 - Rui Hu, Weihao Hu, Zhe Chen:
Development of distributed simulation platform for power systems and wind farms. 3443-3448 - Imad Eddine Aiteur, Cristina Vlad, Emmanuel Godoy:
Optimization-based energy management strategies for electric vehicles. 3449-3454 - Michael Schael, Pascal Cueillette, Constantinos Sourkounis:
Modelling and power quality evaluation of power transformers. 3455-3460 - Kazuya Tamura, Takahiro Nozaki, Atsuo Kawamura:
Visual servo system for ball dribbling by using bipedal robot "Nao". 3461-3466 - Bo Jiang, Amro M. Farid, Aramazd Muzhikyan, Kamal Youcef-Toumi:
Impacts of industrial baseline errors in demand side management enabled enterprise control. 3467-3472 - Gokhan Alcan, Morteza Ghorbani, Ali Kosar, Mustafa Unel:
Vision based cone angle estimation of bubbly cavitating flow and analysis of scattered bubbles using micro imaging techniques. 3473-3474 - Youness Trachi, Elhoussin Elbouchikhi, Vincent Choqueuse, Mohamed Benbouzid:
Stator current analysis by subspace methods for fault detection in induction machines. 3479-3484 - Christian Fontana, Mattia Forato, Kundan Kumar, Maria Teresa Outeiro, Manuele Bertoluzzo, Giuseppe Buja:
Soft-switching capabilities of SAB vs. DAB converters. 3485-3490 - Kaweewat Tattiwong, Chanin Bunlaksananusorn:
Design and implementation of an integrated boost-flyback converter. 3491-3496 - Johnny Chhor, Michael Schael, Frederik Einwächter, Constantinos Sourkounis:
Modular power conditioner concept for improving quality of supply. 3497-3502 - Hyun-jin Choi, Sehoon Oh, Kyoungchul Kong:
State estimation and position control of a robotic manipulator with a biarticular actuation mechanism. 3503-3507 - Alexandre Ravey, Ali Mohammadi, David Bouquain:
Control strategy of fuel cell electric vehicle including degradation process. 3508-3513 - Chun-An Cheng, Tsung-Yuan Chung:
A novel integrated driver with PFC for supplying light-emitting diodes. 3514-3518 - Hans-Christian Lahne, Dieter Gerling:
Comparison of state-of-the-art high-speed high-power machines: Research study including a design example of a 50000 rpm induction machine. 3519-3524 - Febry Pandu Wijaya, Keiichiro Kondo:
Charging power limitation method of a wireless power transmission system for railway vehicle. 3525-3530 - Thomas Guillod, Florian Krismer, Raphael Färber, Christian M. Franck, Johann W. Kolar:
Protection of MV/LV solid-state transformers in the distribution grid. 3531-3538 - Rui Hu, Weihao Hu, Zhe Chen:
Review of power system stability with high wind power penetration. 3539-3544 - Yanjun Tian, Fujin Deng, Zhe Chen, Poh Chiang Loh, Yanting Hu:
Impedance analysis of control modes in cascaded converter. 3545-3550 - Charles Lorenzini, Jeferson Vieira Flores, Luís Fernando Alves Pereira, Aurelio Tergolina Salton, Rafael Silveira Castro:
Repetitive controller with low-pass filter compensation applied to Uninterruptible Power Supplies (UPS). 3551-3556 - Eri Sato-Shimokawara, Aoi Suzuki, Reona Gomi, Toru Yamaguchi:
Obtaining user's preference and ability from human-robot conversation towards mutual assistance. 3557-3560 - Hao Ran Chi, Chung Kit Wu, King-Tim Ko, Kim Fung Tsang, Faan Hei Hung:
Efficiency and robustness management for IEEE 802.15.4 in healthcare sensor network. 3561-3565 - Ahmad Ghaderi, Amir Ali Forough Nassiraei:
The economics of using electric vehicles for vehicle to building applications considering the effect of battery degradation. 3567-3572 - Tetsuya Morizono, Kenji Tahara, Hitoshi Kino:
Experimental investigation of contribution of biarticular actuation to mappings between sensory and motor spaces. 3573-3578 - Dalvir K. Saini, Agasthya Ayachit, Marian K. Kazimierczuk, Tadashi Suetsugu:
Buck DC-AC converter using gallium-nitride FETs for amplitude-modulated class-E RF power amplifiers. 3579-3584 - Mario Gonzalez Ramirez, Carlos Alberto Cruz Villar:
Single-phase to three-phase AC/DC/AC converter for an induction motor using a SEPIC PFC converter in DCM as rectifying stage. 3585-3590 - Valeria Boscaino, Giovanni Cipriani, Domenico Curto, Vincenzo Di Dio, Vincenzo Franzitta, Marco Trapanese, Alessia Viola:
A small scale prototype of a wave energy conversion system for hydrogen production. 3591-3596 - Dalvir K. Saini, Agasthya Ayachit, Marian K. Kazimierczuk, Tadashi Suetsugu:
Small-signal analysis of PWM boost converter in CCM with complex impedance load. 3597-3602 - Roberta Bertani, Forzan Forzan, Paolo Sgarbossa, Elisabetta Sieni, Paolo Di Barba, Federico Spizzo, L. Del Bianco:
Multi-objective design of a magnetic fluid hyperthermia device. 3603-3608 - Kanzumba Kusakana:
Daily operation cost minimization of photovoltaic-diesel-battery hybrid systems using different control strategies. 3609-3613 - Mokhtar Aly, Gamal M. Dousoky, Masahito Shoyama:
Lifetime-oriented SVPWM for thermally-overloaded power devices in three-level inverters. 3614-3619 - Alberto Berzoy, A. A. S. Mohamed, Osama A. Mohammed:
Dynamic space-vector model of induction machines with stator inter-turn short-circuit fault. 3620-3625 - Philipp Spichartz, Philip Dost, Nora Becker, Constantinos Sourkounis:
Experiences with long distance electromobility in metropolitan areas. 3626-3631 - Sota Shimizu, Susumu Sato:
Towards non-mechanical wide angle fovea sensor - Fundamental design by liquid crystal lens cell. 3632-3637 - Humphrey Mokom Njawah Achiri, Václav Smídl, Zdenek Peroutka:
Mitigation of electric drivetrain oscillation resulting from abrupt current derating at low coolant flow rate. 3638-3642 - Jeffrey Wermann, Nils Kliesing, Armando Walter Colombo, Eduardo Cardoso Moraes:
Impact of new ICT trends for the educational curriculum in the area of Industrial Automation and engineering. 3643-3648 - Ryuji Iijima, Takanori Isobe, Hiroshi Tadano:
Investigation of eliminating free-wheeling diode conduction of Z-source inverter using SiC-MOSFET. 3649-3652 - Masaki Takeya, Seiichiro Katsura:
Analysis of generalized hybrid parameters based on macro-micro bilateral control for avoiding destruction of micro object. 3654-3659 - Xiaohua Jiang, Jin Xu, Bin Cui, Yingyu Zeng, Zhongxi Li:
Evaluations and measurements of a high frequency nanocrystalline core transformer for power converters. 3660-3663 - Markus Andresen, Marco Liserre, Friedrich Wilhelm Fuchs, Nils Hoffmann:
Design of a grid adaptive controller for PWM converters with LCL filters. 3664-3671 - Mohannad Khair Allah, Fares Al Juheshi, Nasser A. Aljuhaishi, Mahmoud A. Alahmad, Herbert L. Hess:
A novel twelve level inverter topology for adaptive input sources. 3672-3677 - Yau-Zen Chang, Ming-Hsi Hsu, Chieh-Tsai Wu, Shih-Tseng Lee:
Development of a visual compressive trackng system enhanced by adaptive boosting. 3678-3682 - Kavya Prabha Divakarla, Shamsuddeen Nalakath, Martin Drennan, Ryan M. Ahmed, Ali Emadi, Saiedeh N. Razavi:
Battery characterization and state-of-charge prediction for different journey conditions with the help of the "journey mapping" concept. 3683-3688 - Georgios Papafotiou, Georgios D. Demetriades, Vassilios G. Agelidis:
Integration of model-predictive control in medium and high-voltage power electronics products: An industrial perspective on gaps and progress required. 3689-3695 - Gregor Bauer, Benjamin Großmann, Thomas Schlegl, Hiroshi Kobayashi:
Modeling, identification and control of an antagonistically actuated joint for telerobotic systems. 3696-3701 - Xavier del Toro García, Carlos de la Cruz, Pedro Roncero-Sánchez, Alfonso Parreno Torres:
A small-scale hybrid energy storage system for modeling and control validation purposes. 3702-3707 - Miloud Rezkallah, Shailendra Sharma, Ambrish Chandra, Bhim Singh:
Hybrid standalone power generation system using hydro-PV-battery for residential green buildings. 3708-3713 - Manjunath Machnoor, Javed S. Gaggatur, K. Sanjeev:
Novel spike-based architecture for RFID and Sensor communication system. 3714-3719 - Ali Shagerdmootaab, Mehrdad Moallem:
A novel primary-side LED power regulation without auxiliary winding. 3720-3725 - Márcio Stefanello, Jorge Rodrigo Massing, Rodrigo Padilha Vieira:
Robust control of a grid-connected converter with an LCL-filter using a combined sliding mode and adaptive controller in a multi-loop framework. 3726-3731 - Mario Porru, Alessandro Serpi, Ignazio Marongiu, Alfonso Damiano:
A novel hybrid energy storage system for electric vehicles. 3732-3737 - Sanna Uski:
Dynamic line rating forecastability for conservative day-ahead line rating values. 3738-3742 - George K. Georgoulas, Petros S. Karvelis, Chrysostomos D. Stylios, Ioannis P. Tsoumas, Jose Alfonso Antonino-Daviu, Jesús A. Corral-Hernández, Vicente Climente-Alarcon, George Nikolakopoulos:
Automatizing the detection of rotor failures in induction motors operated via soft-starters. 3743-3748 - Sameer Rokade, B. Bandyopadhyay, Vivek Agarwal, Sukumar Mishra:
Control of single-stage grid-connected three-phase solar photovoltaic system using sliding mode control. 3749-3754 - Manel Velasco, Pau Martí, Javier Torres-Martinez, Jaume Miret, Miguel Castilla:
On the optimal reactive power control for grid-connected photovoltaic distributed generation systems. 3755-3760 - Armando W. Colombo, Dirk Schleuter, Matthias Kircher:
An approach to qualify human resources supporting the migration of SMEs into an Industrie4.0-compliant company infrastructure. 3761-3766 - Anh-Tu Nguyen, Chouki Sentouh, Jean-Christophe Popieul:
Online adaptation of the authority level for shared lateral control of driver steering assist system using dynamic output feedback controller. 3767-3772 - Thieli Smidt Gabbi, Hilton Abílio Gründling, Rodrigo Padilha Vieira:
Current controller for sensorless PMSM drive using combined sliding mode strategy and disturbance observer. 3773-3778 - Issei Takeuchi, Seiichiro Katsura:
Motion reproduction based on time-adaptation in multi-degree-of-freedom system for contact task. 3786-3791 - Sean A. Huang, Chang-Ming Liaw, Jhong-Yan Ni:
Interleaving DC/DC converter-fed electric skateboard with power factor corrected charger. 3792-3797 - Ricardo Vidal-Albalate, Diego E. Soto-Sanchez, Enrique Belenguer, Rubén Peña, Ramón Blasco Giménez:
Modular multi-level DC-DC converter for high-power and high-voltage applications. 3798-3803 - Alessandro Serpi, Giuseppe Fois, Federico Deiana, Gianluca Gatto, Ignazio Marongiu:
Performance improvement of brushless DC machine by zero-sequence current injection. 3804-3809 - Shih-Chin Yang:
Performance evaluation of stator winding fault detection in the inverter-fed permanent magnet machine using high frequency voltage injection. 3810-3815 - Hanzhou Liu, Louis Chow, Thomas Wu:
Design of a permanent magnet motor with wide temperature range. 3816-3820 - Mahmoud A. Gaafar, Gamal M. Dousoky, Masahito Shoyama:
Dual feedback active damping method for grid-connected LCL filter resonance. 3821-3826 - Kerim Colak, Erdem Asa, Dariusz Czarkowski, Hasan Komurcugil:
A novel multi-level bi-directional DC/DC converter for inductive power transfer applications. 3827-3831 - Antonio Sa, Rui Amaral Lopes, João F. A. Martins:
Design of an agent-based simulator for real-time estimation of power consumption/generation in residential buildings. 3832-3838 - Yan-Kim Tran, Drazen Dujic, Philippe Barrade:
Multiport resonant DC-DC converter. 3839-3844 - Danilo B. Herrera, Eduardo Galvan, Juan Manuel Carrasco Solís:
Synchronous reluctance motor design based EV powertrain with inverter integrated with redundant topology. 3851-3856 - Hiroshi Igarashi:
Human maneuver model learning with prediction based filtering. 3857-3862 - Miguel Moranchel, Fco. Manuel Sánchez, Emilio José Bueno, Francisco J. Rodríguez, Ines Sanz:
Six-level modular multilevel converter prototype with centralized hardware platform controller. 3863-3868 - Pablo Gutiérrez Peon, Elisabeth Uhlemann, Wilfried Steiner, Mats Björkman:
A wireless MAC method with support for heterogeneous data traffic. 3869-3874 - Miguel Moranchel, Ines Sanz, Emilio José Bueno, Francisco Javier Rodríguez:
Comparative of modulation techniques for modular multilevel converter. 3875-3880 - Zhenbin Zhang, Hui Fang, Ralph Kennel:
Fully FPGA based direct model predictive power control for grid-tied AFEs with improved performance. 3881-3886 - Mark Butcher, Alessandro Giustiniani, Roberto Losito, Alessandro Masi:
Controller design and verification for a rotational piezo-based actuator for accurate positioning applications in noisy environments. 3887-3892 - Lucio Ciabattoni, Gionata Cimini, Francesco Ferracuti, Massimo Grisostomi, Gianluca Ippoliti, Matteo Pirro:
Bayes error based feature selection: An electric motors fault detection case study. 3893-3898 - Daniel Schachinger, Christoph Stampfel, Wolfgang Kastner:
Interoperable integration of building automation systems using RESTful BACnet Web services. 3899-3904 - Chendan Li, Federico de Bosio, Sanjay K. Chaudhary, Moisès Graells, Juan C. Vasquez, Josep M. Guerrero:
Operation cost minimization of droop-controlled DC microgrids based on real-time pricing and optimal power flow. 3905-3909 - Ameer Janabi, Bingsen Wang:
Hybrid matrix converter based on instantaneous reactive power theory. 3910-3915 - Sandro Günter, Friedrich Wilhelm Fuchs:
Analytical semiconductor loss calculation of hysteresis current controlled 2-level and 3-level ANPC inverters in grid impedance measurement and active filter applications. 3916-3921 - Noman Ahmed, Lennart Angquist, Antonios Antonopoulos, Lennart Harnefors, Staffan Norrga, Hans-Peter Nee:
Performance of the modular multilevel converter with redundant submodules. 3922-3927 - Ernesto L. Barrios, Andoni Urtasun, Alfredo Ursúa, Luis Marroyo, Pablo Sanchis:
Optimal DC gapped inductor design including high-frequency effects. 3928-3933 - Ross Kerley, Ji Hoon Hyun, Dong Sam Ha:
Automotive lead-acid battery state-of-health monitoring system. 3934-3938 - Vitor Monteiro, Andrés A. Nogueiras Meléndez, João Ferreira, Carlos Couto, João Luiz Afonso:
Experimental validation of a proposed single-phase five-level active rectifier operating with model predictive current control. 3939-3944 - Mai Tuan Dat, Johan Driesen:
Dynamic behavior of DC microgrids under load types and controlled-distributed energy resources. 3945-3950 - Francisco Giacometto, Francesca Capelli, Enric Sala, Jordi-Roger Riba, Luis Romeral:
Temperature rise estimation of substation connectors using data-driven models: Case: Thermal conveccion response. 3957-3962 - Jakub Talla, Lubos Streit, Zdenek Peroutka, Pavel Drábek, Vojtech Blahnik:
Fuzzy energy management strategy for tram with supercapacitors. 3963-3968 - Sandeep Patil, Gulnara Zhabelova, Valeriy Vyatkin, Bruce M. McMillin:
Towards formal verification of smart grid distributed intelligence: FREEDM case. 3974-3979 - Ines Sanz, Emilio José Bueno, Miguel Moranchel, Francisco Javier Rodríguez:
Fault-tolerant cascaded H-bridge converter for an induction motor drive. 3980-3985 - Alexander Kerezov, Anupama Kulkarni, Stoyan N. Nihtianov:
Wireless temperature sensor for harsh industrial environments. 3986-3991 - Mario A. Juárez, Panfilo R. Martinez, Gerardo Vázquez, José M. Sosa, Mario Ponce-Silva:
Analysis and design for self-oscillating LED driver with high frequency pulsating output current. 3992-3996 - Lorand Bede, Ghanshyamsinh Gohil, Mihai Ciobotaru, Tamas Kerekes, Remus Teodorescu, Vassilios G. Agelidis:
Circulating current controller for parallel interleaved converters using PR controllers. 3997-4002 - Ricardo P. Aguilera, Roky Baidya, Pablo Acuña, Sergio Vazquez, Toit Mouton, Vassilios G. Agelidis:
Model predictive control of cascaded H-bridge inverters based on a fast-optimization algorithm. 4003-4008 - Jan Haase, Gerhard Zucker, Fares Al Juheshi, Mohannad Khair Allah, Mahmoud A. Alahmad:
A survey of adaptive systems supporting green energy in the built environment. 4009-4014 - Yukiko Osawa, Seiichiro Katsura:
Thermal impedance control for thermal rendering technique. 4015-4020 - Irwin A. Diaz-Diaz:
Test bed to teach power quality applying the b-learning methodology. 4027-4031 - Xin Yu, Thaddeus A. Roppel, John Y. Hung:
An optimization approach for planning robotic field coverage. 4032-4039 - Soledad Bernal-Perez, Salvador Añó-Villalba, Ramón Blasco Giménez:
Stability analysis of HVDC-diode rectifier connected off-shore wind power plants. 4040-4045 - Dominik Luczak, Krzysztof Zawirski:
Parametric identification of multi-mass mechanical systems in electrical drives using nonlinear least squares method. 4046-4051 - Xin Yu, John Y. Hung:
Coverage path planning based on a multiple sweep line decomposition. 4052-4058 - Yingguang Sun, Matthias Preindl, Shahin Sirouspour, Ali Emadi:
Nonlinear modeling and design of initial position estimation and polarity detection of IPM drives. 4059-4064 - Michael Ruderman:
Asymptotic observer of the link states of flexible joint robots with motor-side sensing. 4065-4069 - José J. Silva, José R. Espinoza, Jaime Addin Rohten, Miguel A. Torres, Eduardo E. Espinosa:
Grid connected PV system with maximum power point estimation based on reference cells. 4070-4075 - Jorge Luis Mayorga, Camilo Dominguez-Bonilla, Alonso Gutierrez, José Fernando Jiménez Vargas, Harold Chamorro:
Development of real-time control emulator in FPGA using HiLeS methodology. 4076-4081 - Alexander Filonenko, Wahyono, Danilo Cáceres Hernández, Dongwook Seo, Kang-Hyun Jo:
Real-time flood detection for video surveillance. 4082-4085 - Guishi Wang, Josep Pou, Vassilios G. Agelidis:
Reconfigurable battery energy storage system for utility-scale applications. 4086-4091 - Morcos Metry, Mohammad B. Shadmand, Robert S. Balog, Haitham Abu-Rub:
High efficiency MPPT by model predictive control considering load disturbances for photovoltaic applications under dynamic weather condition. 4092-4095 - Shodai Tanaka, Tomoyuki Shimono, Yasutaka Fujimoto:
Verification of robust position control on a cross-coupled 2-DOF direct drive actuator. 4098-4103 - Shamsuddeen Nalakath, Matthias Preindl, Yinye Yang, Berker Bilgin, Bing Cheng, Ali Emadi:
Modeling and analysis of core losses of an IPM machine for online estimation purposes. 4104-4109 - Orika Orrie, Bruno J. Silva, Gerhard P. Hancke:
A wireless smart parking system. 4110-4114 - Shunya Takano, Shodai Tanaka, Shuhei Yamaguchi, Tomoyuki Shimono, Takahiro Mizoguchi:
Design and analysis of a linear permanent magnet machine with three phase multi-layered structure. 4115-1420 - Jan Michalik, Zdenek Peroutka, Václav Smídl:
Finite control set MPC of active current-source rectifier with full state space model. 4121-4126 - Romina Rodriguez, Matthias Preindl, Ali Emadi, James S. Cotton:
Maximum power point tracking for thermoelectric generators with high frequency injection. 4127-4132 - Nisha Kondrath, Mace Al-Chalabi:
Performance evaluation of SiC based bidirectional dc-dc buck-boost converter operating in CCM using temperature-dependent L3 spice model. 4133-4138 - Alireza Safaee, Praveen K. Jain, Alireza R. Bakhshai:
Time-domain analysis of a wide-range dual-active-bridge bidirectional series resonant converter. 4139-4145 - Kaiyang Liu, Afshin Izadian:
A selective polarity DC-DC converter with infinite output voltage levels. 4146-4151 - João F. A. Martins, Pedro Pereira, Armando J. Pires, V. Fernão Pires:
A new teaching tool to enhance power quality assessment. 4158-4162 - Yasutaka Nakashima, Yuya Matsumoto, Yo Kobayashi, Kazuya Takizawa, Satoshi Miura, Masakatsu G. Fujie:
Foot pressure and posture information-based visual feedback system for well-balanced gait in older people. 4163-4168 - Yuya Shimanuki, Koichi Hidaka:
Route space detection of industrial indoor vehicle with joint extended histograms of oriented gradients(EHOG). 4169-4174 - Xin Qi, Kun Wang, Dong Yue, Lei Shu, Yan Liu, Huidan Zhao:
Adaptive TDMA-based MAC protocol in energy harvesting wireless body area network for mobile health. 4175-4180 - Paulo Leitão, Juan Carlos Fraile Marinero, Vidal Moreno, Robert Harrison, Halis Altun, Armando W. Colombo, Javier Pérez Turiel, Belén Curto:
Transnational lifelong education course in robotic systems. 4181-4186 - Thomas Frühwirth, Florian Pauker, Andreas Fernbach, Iman Ayatollahi, Wolfgang Kastner, Burkhard Kittl:
Guarded state machines in OPC UA. 4187-4192 - Hiroki Murata, Yusuke Kawamura, Seiichiro Katsura:
Filtering of jitter based on inverse related filters and error corrector in network control systems. 4199-4204 - Ahmad Anad Abduallah, Atif Iqbal, Mohammad Meraj, Lazhar Ben-Brahim, Rashid Alammari, Haitham Abu-Rub:
Discontinuous space vector pulse width modulation techniques for a five-phase quasi Z-source inverter. 4205-4210 - Tomokazu Mishima, Souta Morinaga, Mutsuo Nakaoka:
All-SiC power module-applied single-stage ZVS-PWM AC-AC converter for high-frequency induction heating. 4211-4216 - Tomoki Kono, Seiichiro Katsura:
Command shaping with transition of state for smooth force control. 4217-4222 - Daisuke Hiramatsu, Tomoyuki Shimono, Atsuo Kawamura, Takahiro Nozaki, Yosuke Asano:
Realization of storage and reproduction of water pouring task based on controlled variable of task. 4223-4228 - Roberto Fernandez Molanes, Filipe Salgado, José Fariña, Juan J. Rodríguez-Andina:
Characterization of FPGA-master ARM communication delays in Cyclone V devices. 4229-4234 - Zhenzhou Wang:
A generalized method for automatic segmentation of neighboring cells. 4235-4240 - Gerasimos G. Rigatos, Pierluigi Siano, Nikos Zervos, Carlo Cecati:
Nonlinear synchronizing control of parallel inverters connected to the electricity grid. 4241-4246 - Gerasimos G. Rigatos, Pierluigi Siano, Patrice Wira:
Flatness-based adaptive fuzzy control for active power filters. 4247-4252 - Xuewei Pan, Akshay K. Rathore:
Bidirectional naturally clamped soft-switching current-fed push-pull DC/DC converter. 4253-4258 - Amarendra Edpuganti, Ankita Dwivedi, Akshay K. Rathore, Rakesh K. Srivastava:
Optimal pulsewidth modulation of cascade nine-level (9L) inverter for medium voltage high power industrial AC drives. 4259-4264 - Akihiro Suzumura, Yasutaka Fujimoto:
Three-degree-of-freedom control and its application to motion control systems. 4265-4270 - Kok Kiong Tan, Wenyu Liang, Jun Yik Lau, Si-Lu Chen, Minh Hoang-Tuan Nguyen:
Visual exploration platform design for fine profile sensing in precision motion systems. 4271-4276 - Jun Yik Lau, Minh Hoang-Tuan Nguyen, Wenyu Liang, Kok Kiong Tan:
Application of design of experiments to feature selection in ventilation tube applicator. 4277-4282 - Shota Yabui, Takenori Atsumi:
A design method of initial value for adaptive feed-forward control using support vector machine. 4283-4288 - Yun Ai, Bjørn Olav Hogstad, Michael Cheffena, Matthias Pätzold:
Geometry-based modeling of wideband industrial indoor radio propagation channels. 4299-4304 - Mohammad Meraj, Atif Iqbal, Lazhar Ben-Brahim, Rashid Alammari, Haitham Abu-Rub:
A high efficiency and high reliability single-phase modified quasi Z-Source inverter for non-isolated grid-connected applications. 4305-4310 - Jaime W. Zapata, Samir Kouro, Matias Aguirre, Thierry Meynard:
Model predictive control of interleaved dc-dc stage for photovoltaic microconverters. 4311-4316 - Wente Zeng, John Gibeau, Mo-Yuen Chow:
Economic benefits of plug-in electric vehicles using V2G for grid performance-based regulation service. 4322-4327 - Hani Vahedi, Mohammad Sharifzadeh, Kamal Al-Haddad, Bogdan M. Wilamowski:
Single-DC-source 7-level CHB inverter with multicarrier level-shifted PWM. 4328-4333 - Hani Vahedi, Hadi Youssef Kanaan, Kamal Al-Haddad:
PUC converter review: Topology, control and applications. 4334-4339 - Muhammad Asyraf Azlin Shah, Khairul Salleh Mohamed Sahari, Muhammad Fairuz Abdul Jalal, Adzly Anuar:
Development of 1-inch boiler tube inspection robot. 4340-4344 - Xingguo Lu, Ming Liu:
A fuzzy logic controller tuned with PSO for delta robot trajectory control. 4345-4351 - Huy Nhien Nguyen, Yasutaka Fujimoto:
Modeling of claw pole helical motor. 4358-4363 - Satoshi Suzuki, Yasue Mitsukura:
Strategy and verification to visualize experiential values in skill education service: Case study to nursing operation on Bed. 4364-4369 - Hitoshi Haga, Kenta Sayama, Kiyoshi Ohishi, Takayuki Shimizu:
Current control system based on repetitive control and disturbance observer for single-phase five-level inverter. 4370-4375 - Kei Matsuura, Kiyoshi Ohishi, Hitoshi Haga, Itaru Ando:
Fine motor current control based on new current reconstruction method using one DC-link current sensor. 4376-4381 - Daisuke Tomizuka, Kouhei Ohnishi:
The control scheme of underactuated master system in bilateral control for operation of fragile environment. 4382-4387 - Paz Castillo, Samir Kouro, Christian A. Rojas, Nicolas Muller:
Photovoltaic DC-DC converter for direct power interface to copper electrorefining process. 4388-4393 - Xian-Ming Zhang, Qing-Long Han:
Event-triggered H∞ controller design for networked control systems with nonlinear perturbations. 4394-4399 - Petrus Sutyasadi, Manukid Parnichkun:
Trotting control of a quadruped robot using PID-ILC. 4400-4405 - Fredrik Raak, Yoshihiko Susuki, Ryosuke Morita, Takayuki Wada, Kazuhisa Tsuboki, Hiroshi Uyeda, Yasumasa Fujisaki, Takashi Hikihara:
Dynamic simulation of a wind farm incorporated with highly-resolved wind prediction data. 4406-4411 - Masahiro Tajiri, Yasutaka Fujimoto:
Design of bilateral control based on complementary sensitivity function using velocity information. 4412-4417 - Ahmed Abdelhakim, Paolo Mattavelli, Giorgio Spiazzi:
Modified modulation scheme of the buck-boost voltage source inverter for bidirectional power flow capability. 4418-4423 - Tsuyoshi Hanamoto, Norhisam Bin Misron, Saman Toosi:
DDPWM-based power conversion system using three to four phase matrix converter for stand-alone power system. 4424-4429 - Ryo Tanabe, Kan Akatsu:
Advanced torque control of permanent magnet synchronous motor using finite element anasysis based motor model with a real-time simulator. 4430-4435 - Akio Yamano, Atsuhiko Shintani, Tomohiro Ito, Chihiro Nakagawa:
Basic study of power reduction for shape memory alloy actuator drive. 4436-4440 - Mitsunori Uemura, Hiroaki Hirai, Fumio Miyazaki:
Adaptive tracking control with partial regressor for multi-joint robot. 4441-4446 - Tatiana Shults, Oleksandr Husev, Carlos Roncero-Clemente, Frede Blaabjerg, Ryszard Strzelecki:
Design of three-phase three-level CIC T-source inverter with maximum boost control. 4447-4452 - Chao Li, Bin Yao, Xiaocong Zhu:
Analysis and compensation of nonlinear friction effect on frequency identification. 4453-4458 - Hisao Fukumoto, Tatsuya Furukawa, Hideaki Itoh, Masashi Ohchi:
Calculating leakage reactance of 9-winding transformer using time-dependent 3D FEM analysis. 4459-4464 - Satoru Goto, Yoshimi Matsuda, Toshiki Kikugawa, Yoshinori Kobayashi, Yoshinori Kuno:
Remote communication support system as communication catalyst for dementia care. 4465-4470 - Aldo Boglietti, Radu Bojoi, Andrea Cavagnino, Marco Cossale, Alberto Tenconi:
Analysis of different forced convection cooling systems for belt-driven starter-generator. 4471-4476 - Kaoru Inoue, Takuma Arizono, Toshiji Kato:
Numerically designed optimal trajectories of induction motor for energy-saving and jerk suppression based on 3-dimensional loss map. 4477-4481 - Chandan Kumar, Marco Liserre:
A new prospective of smart transformer application: Dual microgrid (DMG) operation. 4482-4487 - Apala Ray, Johan Åkerberg, Mats Björkman, Mikael Gidlund:
Towards security assurance for heterogeneous industrial networks. 4488-4493 - Hani Vahedi, Kamal Al-Haddad:
Single-DC-source five-level CHB inverter with sensor-less voltage balancing. 4494-4499 - Sten Griiner, Ulrich Epple:
Real-time properties for design of heterogeneous industrial automation systems. 4500-4505 - Rudi Wierckx, Sumek Elimban:
Real-time performance of FPGA-based MMC valves for HVDC systems. 4506-4512 - Shibal Ibrahim, Nauman Ahmad Zaffar:
Networked PFC drive for SPPSCIM air conditioners to enable elastic load operation in constrained power systems. 4513-4518 - Javier Morales, Luis García de Vicuña, Ramon Guzman, Miguel Castilla, Jaume Miret, Javier Torres-Martinez:
Sliding mode control for three-phase unity power factor rectifier with vector operation. 4519-4524 - Kaoru Mitsuhashi, Yasuhiro Ohyama, Hiroshi Hashimoto:
Miniaturization and drive evaluation of modular robot by 3D printer. 4519-4823 - Matthias Becker, Kristian Sandström, Moris Behnam, Thomas Nolte:
A many-core based execution framework for IEC 61131-3. 4525-4530 - Mustapha Debbou, Maria Pietrzak-David:
Acoustic noise reduction in VSI-DFIM for electrical naval propulsion. 4531-4537 - Ilya Galkin, Maxim Vorobyov:
Optimizing of sampling in a low-cost single-phase instantaneous AC-grid synchronization unit with discrete calculation of derivative function. 4538-4543 - Marius-Silviu Donea, Dieter Gerling:
Optimal electrical drive configuration to use in a Do 128-6 aircraft taking into account the electromagnetic, mechanical and aerodynamic designs. 4544-4549 - Dumidu Wijayasekara, Milos Manic:
Data-fusion for increasing temporal resolution of building energy management system data. 4550-4555 - Sang-Deok Lee, Seul Jung:
Experimental verification of stability region of balancing a single-wheel robot: An inverted stick model approach. 4556-4561 - Satoshi Sadamura, Yasutaka Fujimoto:
Motion prediction and human detection using a single 2D laser range finder. 4562-4567 - Naoki Motoi, Ryogo Kubo:
An implementation method of workspace observer considering fluctuation of equivalent mass matrix. 4568-4573 - Zikang Su, Honglun Wang, Xingling Shao, Peng Yao:
Autonomous aerial refueling precise docking based on active disturbance rejection control. 4574-4578 - Kun Zhu:
New trends in the development of wide-area damping control systems. 4579-4584 - Yukako Tani, Chiharu Yamada, Kazuyoshi Fukuzawa, Seiichiro Katsura, Yoshihiro Itaguchi:
3-Dimension analysis of human arm stiffness in reaching movement using arm robot. 4591-4596 - Li-Xia Sun, Yun-Feng Li, Zheng-Geng Wen:
Fast-scale and slow-scale instabilities of photovoltaic inverter. 4597-4602 - Roberto Oboe, Davide Pilastro:
Use of load-side MEMS accelerometers in servo positioning of two-mass-spring systems. 4603-4608 - Yuta Ikezawa, Hiroshi Fujimoto, Daisuke Kawano, Yuichi Goto, Misaki Tsuchimoto:
Bench test of minimum time autonomous driving for electric vehicle based on optimization of velocity profile considering energy constraint. 4609-4614 - Harish Sudhakaran Nair, Rijil Ramchand:
A new switching algorithm for an AC-AC converter with high frequency link. 4615-4620 - Martin Büscher, Sebastian Lehnhoff, Sebastian Rohjans, Filip Andren, Thomas I. Strasser:
Using large-scale local and cross-location experiments for smart grid system validation. 4621-4626 - Abdelfatah Kolli, Alexandre De Bernardinis, Zoubir Khatir, Arnaud Gaillard, Olivier Bethoux, Daniel Hissel:
Part-load control stategy of a 20kW SiC power converter for embedded PEMFC multi-stack architectures. 4627-4632 - Shuhei Shimizu, Takuya Matsunaga, Kouhei Ohnishi:
Method of position error compensation in consideration of symmetric structure for bilateral control system under time delay. 4633-4638 - Sehoon Oh, Chan Lee, Kyoungchul Kong:
Force control and force observer design of series elastic actuator based on its dynamic characteristics. 4639-4644 - Muhammad Saleheen Aftab, Muhammad Shafiq, Fakhra Aftab:
A Lyapunov function neuro-adaptive controller for LFC in two-area power system. 4645-4649 - Daita Kobayashi, Takehiro Imura, Yoichi Hori:
Real-time coupling coefficient estimation and maximum efficiency control on dynamic wireless power transfer using secondary DC-DC converter. 4650-4655 - Shangjian Dai, Chuang Liu, Cong Zhou, Minjun Guan, Shouyi Han, Lei Ren:
Lowcost control of switched reluctance motor using single current sampling resistance. 4656-4660 - Nelson L. Diaz, Adriana C. Luna, Juan C. Vasquez, Josep M. Guerrero:
Equalization algorithm for distributed energy storage systems in islanded AC microgrids. 4661-4666 - Hakim Teiar, Hicham Chaoui, Pierre Sicard:
Almost parameter-free sensorless control of PMSM. 4667-4671 - Andreas Platschek, Bernd Thiemann, Heimo Zeilinger, Thilo Sauter:
An error model for safe industrial communication. 4672-4677 - P. Venkata Krishna, Alok Kumar Singh, Rajesh Gupta:
Grid connected solar PV fed cascaded multilevel inverter implementation using XSG platform. 4678-4683 - Jonas F. P. Queiroz, Artur Dias, Paulo Leitão:
Predictive data analytics for agent-based management of electrical micro grids. 4684-4689 - Phuoc Hoa Truong, Damien Flieller, Ngac Ky Nguyen, Jean Mercklé, Mai Tuan Dat:
Optimal efficiency control of synchronous reluctance motors-based ANN considering cross magnetic saturation and iron losses. 4690-4695 - Fábio Lima, Matheus F. R. Cortez, Patricia P. Schmidt, Ana Karoline Silverio, Joao Chang:
Petri net application in simulation of ambulatory processes. 4696-4701 - Juan Pablo Serrano Rubio, Rafael Herrera Guzmán, Arturo Hernández Aguirre:
Hyperconic multilayer perceptron for function approximation. 4702-4707 - Hiroki Inose, Kazuya Yokoyama, Hiroya Imamura, Isao Kikutani, Taro Nakamura:
Development of an endskeleton type power assist suit using pneumatic artificial muscles with amplification mechanism. 4708-4713 - Ibrahim Mohd. Alsofyani, Nik Rumzi Nik Idris, M. J. Aziz, Abdul Halim Mohd Yatim:
Improving start-up operation of sensorless DTC of induction machines using simple flux regulation. 4714-4719 - Bo Liu, Xian-Ming Zhang, Qing-Long Han:
Event-triggered distributed H∞ filtering over sensor networks under round-robin scheduling. 4720-4725 - K. Srinivasa Rao, Priyesh J. Chauhan, Sanjib Kumar Panda, Gary Wilson, Xiong Liu, Amit Kumar Gupta:
Optimal scheduling of diesel generators in offshore support vessels to minimize fuel consumption. 4726-4731 - Leilei Wu, Ronghai Qu, Bao Song, Haisheng Bi, Jing Ou, Guowei Yang, Chengfei Du:
Analysis of cogging torque in surface permanent magnet machine with manufacturing tolerances. 4732-4737 - Abhisek Ukil:
On asymptotic merit factor of low autocorrelation binary sequences. 4738-4741 - Low Wen Yao, Junaidi Abdul Aziz, Nik Rumzi Nik Idris, Ibrahim Mohd. Alsofyani:
Online battery modeling for state-of-charge estimation using extended Kalman filter with Busse's adaptive rule. 4742-4747 - Yukiko Osawa, Seiichiro Katsura:
Multiple temperature control with detection of contacting points for rendering thermal sensation. 4748-4753 - Hideki Yoshida, Hiroshi Fujimoto, Daisuke Kawano, Yuichi Goto, Misaki Tsuchimoto:
Range extension autonomous driving for electric vehicles based on optimal velocity trajectory and driving braking force distribution considering road gradient information. 4754-4759 - Tomoki Enmei, Hiroshi Fujimoto, Yoichi Hori:
Novel method for high speed force curve measurement considering cantilever dynamics for atomic force microscopy. 4760-4765 - Dinh Tuan Tran, Ryuhei Sakurai, Joo-Ho Lee:
Integration of a topic probability distribution into surgical phase estimation with a hidden Markov model. 4766-4771 - Saptarshi Basak, Chandan Chakraborty:
A new control technique for dual stator induction generator used in standalone applications. 4772-4777 - Liran Zheng, Hua Geng, Geng Yang:
Improved phase-locked loop under heavily distorted grid condition. 4778-4783 - Marco Antonio Fumagalli, Fábio Lima, Fabiano Camargo Rosa:
Vector control of a high speed induction machine supported by magnetic bearings. 4784-4789 - Shin-Horng Chong, Kaiji Sato:
Nominal characteristics trajectory following control as practical controller: A review. 4790-4795 - Stone Cheng, Po-Chien Chou:
Power conditioning applications of 700V GaN-HEMTs cascode switch. 4796-4801 - Sithumini Ekanayake, Rukmi Dutta, M. F. Rahman, Dan Xiao:
Deep flux weakening control of a segmented interior permanent magnet synchronous motor with maximum torque per voltage control. 4802-4807 - Ryu Kubo, Shogo Okamoto, Shogo Nezaki, Naomi Yamada, Yasuhiro Akiyama, Yoji Yamada:
Patient simulator using wearable robot: Representation of invariant sitting-down and standing-up motions of patients with knee-OA. 4808-4813 - Mihai Sanduleac, João F. A. Martins, V. Fernão Pires:
Automating remote grid acceptance and energy services tests suited for large deployments of PV systems in active distribution networks. 4814-4818 - Giorgio Lovison, Motoki Sato, Takehiro Imura, Yoichi Hori:
Secondary-side-only simultaneous power and efficiency control for two converters in wireless power transfer system. 4824-4829 - Saeed Ouni, Andres Ulloa Schmeisser, Mohammad Reza Zolghadri, Hashem Oraee, José Rodríguez, Pablo Lezana:
A decision algorithm to select a proper control method for a cascaded multilevel inverter under faulty condition. 4830-4835 - Phok Chrin, Bruno Dagues, Maria David, Pascal Maussion, Long Bun:
Improvements on experimental modeling of the losses in induction machine with Taguchi orthogonal plan. 4836-4841 - Akinori Hariya, Hiroshige Yanagi, Yoichi Ishizuka, Ken Matsuura, Satoshi Tomioka, Tamotsu Ninomiya:
Influence of parasitic components on MHz-level frequency LLC resonant DC-DC converter. 4842-4847 - Zubair Rehman, Ibrahim Al-Bahadly, Subhas Mukhopadhyay:
Dual input-dual output single inductor dc-dc converter. 4848-4853 - Tatsuya Kato, Kai Shiromi, Masanobu Nagata, Hidetoshi Nakashima, Kazunori Matsuo:
Gait pattern acquisition for four-legged mobile robot by genetic algorithm. 4854-4857 - Thanh Trung Do, Hauke Langkowski, Michael Jordan, Detlef Schulz:
Enhanced grid integration of renewable power plants by grid impedance measurement. 4858-4864 - Arthit Julkananusart, Itthisek Nilkhamhang:
Quadrotor tuning for attitude control based on double-loop PID controller using fictitious reference iterative tuning (FRIT). 4865-4870 - Pavel Dzitac, Abdul Md. Mazid, M. Yousef Ibrahim, Gayan Kahandawa Appuhamillage, Tanveer A. Choudhury:
Friction-based slip detection in robotic grasping. 4871-4874 - Pavel Dzitac, Abdul Md. Mazid, M. Yousef Ibrahim, Tanveer A. Choudhury, Gayan Kahandawa Appuhamillage:
Friction-based slippage and tangential force detection in robotic grasping. 4875-4879 - Mohammad Farshadnia, Muhammad Ali Masood Cheema, Rukmi Dutta, John E. Fletcher, M. F. Rahman:
Anomalies in experimental measurement of operational inductances of a concentrated-wound IPM machine under field-weakening region. 4880-4885 - Jing Su, Bingo Wing-Kuen Ling, Qingyun Dai, Jun Xiao, Kim Fung Tsang:
Mobile based big data design patent image retrieval system via Lp norm deep learning approach. 4886-4889 - Hamed Nademi, Farzad Tahami:
A predictive control of a turbocharged diesel engine for exhaust emission mitigation. 4890-4895 - Hidetoshi Nakashima, Ryousuke Kouyama, Nobuhiko Hiruma, Yoh-ichi Fujisaka:
Binaural wind noise detection, cancellation and its evaluation for hearing aids based on HRTF cues. 4896-4899 - Hongliang Shi, Bin Cui, Yingyu Zeng, Jing Xu, Xiaohua Jiang:
Dynamic physical limits of a phase-shifted full bridge circuit for power supply of Magnetic Resonance Imaging gradient amplifiers. 4900-4904 - Yasutaka Fujimoto:
Modeling and analysis of wireless electro-mechanical energy transfer and conversion using resonant inductive coupling. 4905-4910 - Cheng Wang, Kai Zhang, Liming Liu, Wenxin Liu:
A novel modulation method applied in quasi-Z-source based cascaded pv system suffering module mismatch. 4911-4916 - Ryutaro Honjo, Seiichiro Katsura:
Calculation of grasping force to adapt mass variation of object considering human motion. 4923-4928 - Hongbin Zhou, Chensheng Liu, Bo Yang, Xinping Guan:
Optimal dispatch of electric taxis and price making of charging stations using Stackelberg game. 4929-4934 - Hirofumi Ikoma, Ken Yoshihara, Wataru Kato, Toshimasa Miyazaki, Kiyoshi Ohishi:
Straight driving control for electric tiller considering human driving input. 4935-4940 - Radu Bojoi, Andrea Cavagnino, S. A. Odhano, Alberto Tenconi, Silvio Vaschetto:
Experimental fault assessment on multiphase PM generators with fractional-slot concentrated windings. 4941-4947 - Claudio Carretero, Rafael Alonso, Jesús Acero, José M. Burdio:
Optimized 4-coil inductor system arrangement for induction heating appliances. 4948-4952 - Changjiang Sun, Jianwen Zhang, Yiran Chang, Gang Shi, Xu Cai:
Wide voltage range operation of isolated modular multilevel DC-DC converter. 4953-4958 - Kumar Modepalli, Leila Parsa:
Offshore wind energy systems using high frequency isolated current-fed modular converters. 4959-4964 - Katsuhiro Hata, Takehiro Imura, Yoichi Hori:
Analysis and experiment on harmonic current distortion in wireless power transfer system using a diode rectifier. 4965-4970 - Akram M. Fayaz, Djawad Hamache:
Stabilization and energy management in a DC grid by a variable structure flatness-based controller. 4971-4976 - Oliver Knecht, Johann W. Kolar:
Impact of Transcutaneous Energy Transfer on the electric field and specific absorption rate in the human tissue. 4977-4983 - Sanjay Agrawal, Soumya R. Mohanty, Vineeta Agarwal:
Harmonics and interharmonics estimation of wind power plant using sliding window matrix pencil. 4984-4989 - Mihaela-Codruta Ancuti, Ciprian Sorandaru, Sorin Musuroi, Nicola-Valeriu Olarescu:
High efficiency three-phase interleaved buck-Type PFC rectifier concepts. 4990-4995 - Hanzhou Liu, Zhigang Gao, Wei Wu, Louis Chow, Thomas Wu:
Design of a high-efficiency permanent magnet synchronous motor and inverter system. 4996-5001 - Sabri Orcun Orhan, Mehmet Can Yildirim, Ozkan Bebek:
Design and modeling of a parallel robot for ultrasound guided percutaneous needle interventions. 5002-5007 - Mariusz Bojarski, Erdem Asa, Maria Teresa Outeiro, Dariusz Czarkowski:
Control and analysis of multi-level type multi-phase resonant converter for wireless EV charging. 5008-5013 - Andrea Benigni, Michael Brown, Rodrigo A. Leonard, Roger A. Dougal:
QDEVS natural coupled simulation of a microgrid. 5014-5019 - Marija Stevic, Antonello Monti, Andrea Benigni:
Development of a simulator-to-simulator interface for geographically distributed simulation of power systems in real time. 5020-5025 - Sheng Huang, Oon Peen Gan, Zi Qin Hwang, Hongsheng Song, Lihua Xie:
Passive UHF far-field RFID based localization in smart rack. 5026-5031 - Eiichi Saito, Seiichiro Katsura:
Torque/force control of wave system based on reflected wave rejection and wave-based load disturbance observer. 5038-5043 - Maura Musio, Alessandro Serpi, Claudia Musio, Alfonso Damiano:
Optimal management strategy of energy storage systems for RES-based microgrids. 5044-5049 - Giacomo P. Ferrari, Luca Ferrarini, Anacleto Petretti, Emiliano Pizzi:
Modeling and design of an optimal line manager of a packaging system with MILP. 5050-5056 - Samir Cerimovic, Franz Keplinger, Thilo Sauter:
Calorimetric flow sensors based on thick-film printed thermopiles for air conditioning system monitoring. 5057-5061 - Concettina Buccella, Hassan Abdullah Khalid, Carlo Cecati, Dianguo Xu:
On flatness-based controller for shunt-connected VSC with LCL-filter for voltage dip mitigation in a weak grid. 5062-5067 - Yoshi Ri, Hiroshi Fujimoto:
Proposal of visual servoing using phase-only-correlation (POC). 5068-5073 - Jurgen Ortiz, Vianey Guadalupe Cruz Sánchez, Osslan Osiris Vergara-Villegas, Angel Flores-Abad, Manuel Nandayapa:
High resolution position estimation from hall effect sensor. 5074-5079 - Orion Sky Lawlor, Seta Bogosyan, Yasin Vural, Isaac Thompson, Michael Moss, Metin Gokasan:
AERO-beam: An open-architecture test-bed for research and education in cyber-physical systems. 5080-5086 - Francisco Giacometto, Enric Sala, Konstantinos Kampouropoulos, Luis Romeral:
Short-term load forecasting using Cartesian Genetic Programming: An efficient evolutive strategy: Case: Australian electricity market. 5087-5094 - Siavash Beheshtaein, Mehdi Savaghebi, Josep M. Guerrero:
A fuzzy-based hybrid PLL scheme for abnormal grid conditions. 5095-5100 - Martin Pittermann, Pavel Drábek, Bedrich Bednár:
Single phase high-voltage matrix converter for traction drive with medium frequency transformer. 5101-5106 - Ricardo Vidal, Enrique Belenguer, Cristián Pesce, Diego E. Soto-Sanchez, Rubén Peña, Ramón Blasco Giménez, Javier Riedemann:
Power flow control using a DC-DC MMC for HVdc grid connected wind power plants. 5107-5112 - Jing Li, Mark Sumner, David W. P. Thomas, Edward Christopher, Ke Jia, He Zhang:
Non-contact arc study for DC power systems. 5113-5117 - Sergio Vazquez, Jianxing Liu, Huijun Gao, Leopoldo García Franquelo:
Second Order Sliding Mode control for three-level NPC converters via extended state observer. 5118-5123 - Abraham Marquez, José I. Leon, Ramón C. Portillo, Sergio Vazquez, Leopoldo García Franquelo, Samir Kouro:
Adaptive phase-shifted PWM for multilevel cascaded H-bridge converters for balanced or unbalanced operation. 5124-5129 - Sousuke Nakamura, Yoshinori Kakinuma, Keita Akiho, Hideki Hashimoto:
Prototype design of energy management system for mobile device via Wireless Charging Robot. 5130-5135 - Yushi Miura, Keiji Inubushi, Tomoaki Yoshida, Takuya Fujikawa, Toshifumi Ise:
Operation of modular matrix converter under close input and output frequency by using voltage space vector modulation. 5136-5141 - Yohei Takahashi, Mihoko Niitsuma:
Enhancement of attachment behavior model for social robot to adapt in daily living environments. 5142-5147 - Anissia Beainy, Chantal Maatouk, Nazih Moubayed, Fouad Kaddah:
Decision on failure diagnosis and condition monitoring technique for wind conversion system. 5148-5155 - Keisuke Ueda, Toshimasa Miyazaki, Kiyoshi Ohishi:
Transmission torque linearization of quadruped robot with a two-joint simultaneous drive mechanism for gravity compensation. 5156-5161 - Kazuhiro Tsuruta, Tetsuya Ojiro, Hideki Honda:
Synchronization control for twin-axes table drive system. 5162-5167 - Mohammad Jafari, Zahra Malekjamshidi, Glenn Platt, Jianguo Zhu, David George Dorrell:
A multi-port converter based renewable energy system for residential consumers of smart grid. 5168-5173 - Valeria Boscaino, Giovanni Cipriani, Vincenzo Di Dio, Mattia Corpora, Domenico Curto, Vincenzo Franzitta, Marco Trapanese:
The effect of manufacturing tolerances on a tubular linear ferrite motor. 5174-5177 - Galina Mirzaeva, Graham C. Goodwin, Brendan P. McGrath:
The relationship between classical and MPC horizon 1 based current regulators. 5178-5183 - Mus'ab H. Ahmad, Bilal Ahmad, Daniel Alexandre Vera, Robert Harrison:
An innovative energy predictive process planning tool for assembly automation systems. 5184-5190 - Hiroki Goto, Shinya Murakami, Osamu Ichinokura:
Design to maximize torque-volume density of axial-flux SRM for in-wheel EV. 5191-5196 - Chihiro Kato, Yasuyoshi Kaneko, Kazuma Tsuda, Toshiyuki Fujita, Tsuyoshi Matsumura, Tomio Yasuda:
Investigation of wireless power transfer system with spaced arranged primary H-shaped core coils for moving EVs. 5197-5201 - Chendan Li, Juan C. Vasquez, Josep M. Guerrero:
Multiagent-based distributed control for operation cost minimization of droop controlled DC microgrid using incremental cost consensus. 5202-5205 - Zuolong Wei, Hamid Reza Karimi, Kjell G. Robbersmyr:
EEMD based analysis of vehicle crash responses. 5206-5210 - Pengfei Wang, Kosuke Sekiyama:
Curvature based velocity control system for mobile robot. 5211-5216 - Suchada Rianmora, Kittiphan Nuamchit, Natthakarn Vanasrivilai, Pornpim Tantipiched, Apisit Rammbuth:
Applying scanning techniques to create 3D model. 5217-5222 - Hidemine Obara, Kenji Natori, Yukihiko Sato:
Experimental study on performance improvement of force control by using multi-level converters. 5223-5228 - Kai Song, Chunbo Zhu, Kim Ean Koh, Daita Kobayashi, Takehiro Imura, Yoichi Hori:
Modeling and design of dynamic wireless power transfer system for EV applications. 5229-5234 - Kaiyuan Li, King-Jet Tseng:
Energy efficiency of lithium-ion battery used as energy storage devices in micro-grid. 5235-5240 - Sampathirao Sashidhar, Baylon G. Fernandes:
Optimal design of photovoltaic based submersible permanent magnet BLDC motor using FEM. 5241-5246 - Fabrizio Dughiero, Michele Forzan, Marcello Zerbetto:
Permanent magnet heater for aluminum billets: Experimental results. 5247-5252 - Siavash Beheshtaein, Mehdi Savaghebi, Juan Carlos Vasquez, Josep M. Guerrero:
Protection of AC and DC microgrids: Challenges, solutions and future trends. 5253-5260 - Ricardo P. Aguilera, Pablo Lezana, Georgios Konstantinou, Pablo Acuña, Bin Wu, Steffen Bernet, Vassilios G. Agelidis:
Closed-loop SHE-PWM technique for power converters through Model Predictive Control. 5261-5266 - Daisuke Sato, Jun-ichi Itoh:
Evaluation method of energy consumption for permanent magnet synchronous motor drive system. 5267-5272 - Boubacar Housseini, Aime Francis Okou, Rachid Beguenane:
A unified nonlinear controller design for on-grid/off-grid wind energy battery-storage system. 5273-5278 - Satoshi Nishimura, Seiichiro Katsura:
Analysis and compensation of modeling error for synchronized bilateral teleoperation. 5279-5284 - Onyinyechi Nzimako, Rudi Wierckx:
Stability and accuracy evaluation of a power hardware in the loop (PHIL) interface with a photovoltaic micro-inverter. 5285-5291 - Mohammad Sleiman, Handy Fortin-Blanchette, Luc-André Grégoire, Hadi Youssef Kanaan, Kamal Al-Haddad:
Model predictive control of a dual output seven-level rectifier. 5292-5297 - Hiroki Takahashi, Jun-ichi Itoh:
Ride through capability of matrix converter for grid connected system under short voltage sag. 5298-5303 - Okko Nannen, Klaus Piech, Sebastian Lehnhoff, Sebastian Rohjans, Florian Schlögl, Jorge Velasquez, Filip Andren, Thomas I. Strasser:
Low-cost integration of hardware components into co-simulation for future power and energy systems. 5304-5309 - Akinori Yabuki, Takashi Yoshioka, Kiyoshi Ohishi, Toshimasa Miyazaki, Yuki Yokokura:
Design method of stable force control system using new resonance ratio control and instantaneous state observer. 5310-5315 - Nagisa Takaoka, Jun-ichi Itoh:
Revelation of soft-switching operation for isolated DC to single-phase AC converter with power decoupling. 5316-5321 - Federico de Bosio, Michele Pastorelli, Luiz Antônio de Souza Ribeiro, Marcel Soares Lima, Francisco D. Freijedo, Josep M. Guerrero:
Current control loop design and analysis based on resonant regulators for microgrid applications. 5322-5327 - Shady S. Refaat, Haitham Abu-Rub:
ANN-based diagnosis of incipient stator winding turn faults for three-phase induction motors in the presence of unbalanced supply voltage. 5328-5334 - Saika Ono, Takenori Obo, Chu Kiong Loo, Naoyuki Kubota:
Robot communication based on relational trust model. 5335-5338 - Saeed Sepasi, Leon R. Roose, Marc Matsuura, Hsun Jou:
Universal state of charge estimator for battery packs of battery energy storage systems. 5339-5344 - Shota Nasu, Masayoshi Wada:
Mechanical design of an active-caster robotic drive with dual-wheel and differential mechanism. 5345-5350 - Yuta Oba, Yuki Yamada, Yasuhiro Kakinuma:
Simultaneous control of tool posture and polishing force on unknown curved surface for serial-parallel mechanism polishing machine. 5351-5356 - Hua Fan, K. T. Chau, Chunhua Liu, Zhen Zhang, Chun Qiu:
Quantitative comparison of permanent magnet linear machines for ropeless elevator. 5357-5362 - Carlos A. Reusser, Samir Kouro:
Nine switch multi-channel dual converter for WECS. 5363-5368 - Hadeed Ahmed Sher, Khaled E. Addoweesh, Kamal Al-Haddad:
Performance enhancement of a flyback photovoltaic inverter using hybrid maximum power point tracking. 5369-5373 - Siddhartha A. Singh, Najath Abdul Azeez, Sheldon S. Williamson:
A new single-stage high-efficiency photovoltaic(PV)/grid-interconnected dc charging system for transportation electrification. 5374-5380 - Kunwar Aditya, Mohamed Youssef, Sheldon S. Williamson:
Design considerations to obtain a high figure of merit in circular archimedean spiral coils for EV battery charging applications. 5396-5401 - Kunwar Aditya, Mohamed Youssef, Sheldon S. Williamson:
Analysis of series-parallel resonant inductive coupling circuit using the two-port network theory. 5402-5407 - Vamsi Krishna Pathipati, Najath Abdul Azeez, Sheldon S. Williamson:
Standalone DC level-1 EV Charging using pv/Grid infrastructure, MPPT algorithm and CHAdeMO protocol. 5408-5414 - Ramón C. Portillo, Mohammad Sharifzadeh, Hani Vahedi, Leopoldo García Franquelo, Kamal Al-Haddad:
Improved hybrid SHM-SHE modulation technique for four-leg three-level NPC inverters. 5415-5420 - Kasun Amarasinghe, Dumidu Wijayasekara, Howard J. Carey, Milos Manic, Dawei He, Wei-Peng Chen:
Artificial neural networks based thermal energy storage control for buildings. 5421-5426 - Nicola Ivan Giannoccaro, Issei Uchitomi, Tetsuzo Sakamoto:
Performance of a web transport system with tension control subsystem using speed as control input. 5427-5432 - Rocco Morello, Walter Zamboni, Federico Baronti, Roberto Di Rienzo, Roberto Roncella, Giovanni Spagnuolo, Roberto Saletti:
Comparison of state and parameter estimators for electric vehicle batteries. 5433-5438 - Krzysztof Nowicki, Aleksander Malinowski:
Topology discovery of hierarchical Ethernet LANs without SNMP support. 5439-5443 - Mario Perez-Tarragona, Hector Sarnago, Oscar Lucía, José M. Burdio:
Series resonant multi-inverter prototype for domestic induction heating. 5444-5449
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-11-28 23:53 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
